Student Support: 2015 Annual International Solid Freeform Fabrication Symposium; 2015 Annual International Solid Freeform Fabrication Symposium; Austin, Texas; August 10-12, 2015

学生支持：2015年度国际固体自由形状制造研讨会；

• 批准号: 1536671
• 负责人: David Bourell
• 金额: $ 2.44万
• 依托单位: University of Texas at Austin
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 2015
• 资助国家: 美国
• 起止时间: 2015-05-01 至 2016-04-30
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=1536671&HistoricalAwards=false
• 关键词: Student; Support; 2015; Annual; International

The objective of this award is to enhance student participation in the 2015 Solid Freeform Fabrication Symposium by providing student support for the meeting. The conference theme is research in additive manufacturing. Additive manufacturing, known colloquially as "3D Printing", has in the last few years become a topic of interest nationally and internationally. It has become recognized as a significant advanced manufacturing technology that will create new industries and concomitant domestic jobs for an educated workforce. The 2015 Solid Freeform Fabrication Symposium will be held at the AT&T Executive Education and Conference Center on the campus of The University of Texas at Austin from August 10 to12, 2015. It is anticipated that 220 presentations will be made, 192 oral presentations and 28 poster presentations. Students will have full access to participation in the general organized oral presentations as well as the poster event. The strong international participation will provide domestic participants an excellent opportunity to gain valuable information on research in the field. There is ample time allotted for informal interactions of world-class researchers and students in formal meeting settings and also in informal social events during the meeting. Information on the Solid Freeform Fabrication Symposium, as well as the full conference proceedings, will be made available through the worldwide web at http://sffsymposium.engr.utexas.edu/. Students will have the opportunity to present their work in a world-class setting and will network with international leading senior researchers and other students in their field.This NSF award is to provide partial participant support for up to 80 domestic students to attend the meeting. Selection of students will be made by the chair of the conference organizing committee based on the following criteria: domestic student status, underrepresented groups, engagement in additive manufacturing, co-author or presenter on an oral presentation or poster. Each student awardee will pay a reduced registration fee, approximately $300 less than the cost of participation. If fewer than 80 domestic students attend the meeting in 2015, a one-year, no-cost extension will be requested with the intent to use the residual funds for identical student support for the 2016 Solid Freeform Fabrication Symposium.

该奖项的目的是通过为会议提供学生支持来增强学生参加2015年Solid Freeform制造研讨会的参与。 会议主题是添加剂制造的研究。 在过去的几年中，俗称“ 3D打印”的增材制造业已成为国家和国际上的一个关注的话题。 它已被公认为是一种重要的先进制造技术，它将为受过教育的劳动力创造新的行业和伴随的国内就业机会。 2015年的Solid Freeform制造研讨会将于2015年8月10日至112日在德克萨斯大学奥斯汀大学的AT＆T高管教育与会议中心举行。预计将进行220次演讲，192个口头演讲和28张海报演讲。学生将完全访问一般有组织的口头演示以及海报活动。 强大的国际参与将为国内参与者提供一个极好的机会，以获取有关该领域研究的宝贵信息。在正式的会议环境中，在会议期间，在正式会议环境中以及在非正式的社交活动中分配了足够的时间来进行世界级研究人员和学生的非正式互动。有关Solid Freeform制造研讨会以及完整会议程序的信息将通过http://sffsymposium.engr.utexas.edu/提供。 学生将有机会在世界一流的环境中介绍他们的作品，并将与国际领先的高级研究人员和其他领域的其他学生建立联系。该NSF奖是为最多80名国内学生参加会议的部分参与者支持。 会议组织委员会主席将根据以下标准进行选择：国内学生的身份，代表性不足的团体，在添加剂制造业，合着者或演讲者的口头演讲或海报中的参与。 每个学生获奖者将支付减少的注册费，比参与费用少300美元。如果在2015年参加会议少于80名，则将要求一年的无成本延期延长，目的是使用剩余资金来为2016年Solid Freeform制造研讨会提供相同的学生支持。