课题基金 / 基金详情

I-Corps: Thermally Conductive Polymer Based Interface Materials and Substrates

I-Corps: Thermally Conductive Polymer Based Interface Materials and Substrates
I-Corps:基于导热聚合物的界面材料和基材
批准号:
1561881
负责人:
Baratunde Cola
金额:
$5.0万
依托单位国家:
美国
项目类别:
Standard Grant
财政年份:
2015
资助国家:
美国
项目状态:
已结题
起止时间:
2015-10-15 至 2016-09-30

项目摘要

项目成果

Baratunde Cola的其他基金

相似基金

相关文献

中文摘要
翻译
随着电子系统体积的不断缩小和能量密度的不断提高,散热问题正成为影响电子系统持续性能和可靠性的一大障碍。散热的主要挑战之一是在器件封装过程中两个表面接触的界面上的热传输。为了最大化界面间的热传递,导热材料被放置在两个表面之间,这些材料形成了近10亿美元的热界面材料(TIMs)市场(BCC Research)。tim几乎存在于所有形式的电子设备中,包括消费产品(手机、笔记本电脑等)、电力电子产品(用于可再生能源应用的电动汽车和电源转换器)和照明组件(包括新兴的发光二极管领域),仅举几例。随着这些设备的性能和功率需求不断增加,产生的热量越来越多,需要排出热量,而传统的TIMs缺乏足够的热性能来排出热量。该团队开发了一种新技术来制造聚合物,这种聚合物传统上导热性不佳,但导热性非常高,可用于TIMs。这些材料将为包装和热工程师提供一种新的武器来解决电子加热问题,这将允许在广泛的技术系统中持续创新。所提出的热界面材料(TIMs)表现出增强的机械顺应性和导热性,从而产生完全由聚合物组成的“软”材料,具有前所未有的导热性。传统上,“软”和机械柔顺的材料,如聚合物,由于分子无序导致声子散射,热导率低。为了克服低导热性,通常加入高导热填料来提高复合材料的导热性,但热导率的提高受到界面声子散射的限制,高填充分数会损害材料的力学性能。该团队发现,纳米级约束(迫使聚合物进入非常小的孔隙)可以用来诱导聚合物链的排列,这大大提高了聚合物在排列方向上的导热性。使用氧化氧化铝纳米多孔模板,该团队能够制造大面积的纳米限制聚合物纳米线阵列,具有更好的导热性,可用作热界面材料。所提出的材料通过熔体或电化学方法加工,可以使用多种聚合物系统和结构制造,使其适用于许多潜在的热管理应用。这些材料的导热系数大于体聚合物的50倍,即使在增加的功率密度下也能保持较低的工作温度。
英文摘要
As electronic systems continue to shrink and become more energy dense, thermal dissipation is emerging as a roadblock to sustained performance and reliability. One of the main challenges to heat removal is heat transport across interfaces where two surfaces are placed in contact during device packaging. In order to maximize the thermal transport across interfaces, thermally conductive materials are placed between the two surfaces and these materials form the nearly 1 billion dollar market for thermal interface materials (TIMs) (BCC Research). TIMs are found in nearly all forms of electronic devices including consumer products (cell phones, labtops, etc.), power electronics (electric vehicles and power converters for renewable energy applications), and lighting assemblies (including the emerging field of light emitting diodes), to name a few. As the performance and power demands of these devices continues to increase, more heat is being generated and needs to be removed, yet traditional TIMs lack the thermal properties required to enable sufficient heat removal. This team has developed a new technique to fabricate polymers, which traditionally do not conduct heat well, with very high thermal conductivity for use as TIMs. These materials will provide packaging and thermal engineers with a new weapon to combat the electronics heating problem, which will allow for continued innovation across a wide breath of technological systems. The proposed thermal interface materials (TIMs) demonstrate enhanced mechanical compliance and thermal conductivity, resulting in "soft" materials that are exclusively composed of polymer with unprecedented thermal conductivity. Traditionally, "soft" and mechanically compliant materials such as polymers are plagued by low thermal conductivity due to molecular disorder which results in phonon scattering. To overcome low thermal conductivity, high conductivity fillers are often added to improve composite conductivity, but the improvement in thermal conductivity is limited by interfacial phonon scattering and high fill fractions can compromise the materials mechanical properties. This team has found that nanoscale confinement (forcing the polymer into very small pores) can be used to induce alignment of polymer chains, which greatly improves polymer thermal conductivity in the direction of alignment. Using alumina oxide nanoporous templates the team is able to fabricate large area arrays of nanoconfined polymer nanowires with improved thermal conductivity for use as thermal interface materials. The proposed materials are processed through melt or electrochemical methods and can be fabricated using a multitude of polymer systems and architectures, making them suitable for many potential thermal management applications. These materials exhibit thermal conductivities greater than 50x that of bulk polymer and will allow for improved electronics that can maintain low operational temperatures even at increased power densities.
期刊论文(0)
专著(0)
科研奖励(0)
会议论文
Alan T. Waterman Award 2017
  • 批准号:
    1748413
  • 项目类别:
    Standard Grant
  • 资助金额:
    $100.0万
  • 财政年份:
    2017
  • 负责人:
    Baratunde Cola
  • 依托单位:
Academic and Research Leadership Symposium for Diversity-Driven Innovation
  • 批准号:
    1410572
  • 项目类别:
    Standard Grant
  • 资助金额:
    $4.97万
  • 财政年份:
    2014
  • 负责人:
    Baratunde Cola
  • 依托单位:
RET: Partnerships for Research, Innovation, and Multi-Scale Engineering (PRIME)
  • 批准号:
    1407187
  • 项目类别:
    Standard Grant
  • 资助金额:
    $48.64万
  • 财政年份:
    2014
  • 负责人:
    Baratunde Cola
  • 依托单位:
AIR Option 1: Technology Translation: Large-scale manufacturing of polymer nanotube array thermal interface materials for efficient heat removal from high-temperature electronics
  • 批准号:
    1343265
  • 项目类别:
    Standard Grant
  • 资助金额:
    $15.0万
  • 财政年份:
    2013
  • 负责人:
    Baratunde Cola
  • 依托单位:
海外基金