Collaborative Research: Leveraging a Solvent Toolkit for Doping and Characterizing Hybrid Perovskite Solar Cells

合作研究：利用溶剂工具包进行混合钙钛矿太阳能电池的掺杂和表征

• 批准号: 1906505
• 负责人: Jason Slinker
• 金额: $ 19.99万
• 依托单位: University of Texas at Dallas
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 2019
• 资助国家: 美国
• 起止时间: 2019-06-01 至 2023-12-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=1906505&HistoricalAwards=false
• 关键词: Collaborative; Research; Leveraging; Solvent; Toolkit

Nontechnical:Solar cells are instrumental to efforts to develop environmentally friendly power sources. Solar cells based on hybrid organic/inorganic materials have achieved performance levels comparable to commercial devices. Properties such as low-cost processing and flexibility make them an attractive alternative to silicon. However, improving the performance of hybrid solar cells has been limited by current fabrication and characterization strategies. The PIs have shown that these materials can be electrochemically doped by a liquid without dissolving them. This liquid approach yields a toolkit that can be used to measure and enhance intrinsic electrical properties. This liquid toolkit will be used to modify and enhance hybrid solar cells. The PIs will identify promising materials combinations for hybrid solar cells by computer modeling. Thin films will be prepared, characterized, and optimized for solar cells. Hybrid solar cells will be fabricated and characterized for solar power conversion and stability. Additional studies will identify causes of degradation. These efforts will further the potential of hybrid solar cells to transform the solar energy landscape. The proposed effort will involve education and outreach activities to broaden participation of underrepresented groups, engage the public, and train the next generation of scientists and engineers in renewable energy. Texas State University is a Hispanic Serving Institution. The proposed project will leverage this talent pool to increase diversity in research and STEM education.Technical:The PIs will electrically dope and characterize hybrid perovskite (HP) thin films and solar cell devices using a recently-developed solvent toolkit. This solvent toolkit is based on a hydrofluoroether (HFE) solvent system that is nondestructive to HPs and permits electrochemical characterization and modification of HP thin films. To produce p and n doped devices of favorable electrical and optical performance, the project team will utilize three approaches to identify optimal device compositions from the wide range of possible devices afforded by the solvent toolkit technique. To characterize the broad potential experimental landscape, numerical modeling with density functional theory (DFT) will be performed, identifying favorable doping mixtures. Subsequently, electrochemical study of thin HP films in HFE electrolytes will be performed to experimentally achieve doping effects such as improved conductivity and new energy levels. Finally, HP solar cells will be fabricated from doping strategies motivated by electrochemical study, and carefully characterized for efficiency, structure and stability. More specifically, we will utilize DFT with Hubbard correction and spin-orbital coupling to investigate the effects of different ionic dopants on the band structure, bandgap, doping energy levels, loss of inversion symmetry, Rashba effect, spin texture, electron-phonon coupling, and quantum confinement of HP materials. Electrochemical (EC) doping will be accomplished in HFE solvents with chronopotentiometry and chronoamperometry and characterized with cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy with custom multiplexed chips. HP solar cell devices will be fabricated from films doped by HFE processing and tested for efficiency and lifetime metrics. We will subsequently investigate how the EC doping of HP films affects device performance and stability while the device is being stressed with light and temperature cycles. We will correlate changes in HP-PV device parameters (power conversion efficiency, short-circuit current, open-circuit voltage, filling factor, hysteresis, etc.) with structural, chemical, and optical properties as the device undergoes controlled aging in the air-free atmosphere.This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.

非技术性：太阳能电池有助于开发环境友好型电源。基于有机/无机混合材料的太阳能电池已经达到了与商业设备相当的性能水平。低成本加工和灵活性等特性使它们成为硅的有吸引力的替代品。然而，目前的制备和表征策略限制了混合太阳能电池性能的提高。PI表明，这些材料可以在不溶解的情况下被液体电化学掺杂。这种液体方法产生了一种工具包，可以用来测量和增强固有的电学性质。这个液体工具包将用于修改和增强混合太阳能电池。PI将通过计算机建模来确定混合太阳能电池的有前景的材料组合。将为太阳能电池制备、表征和优化薄膜。将制造混合太阳能电池，并对太阳能转换和稳定性进行表征。其他研究将确定退化的原因。这些努力将进一步发挥混合太阳能电池改变太阳能格局的潜力。拟议的努力将涉及教育和外联活动，以扩大代表不足群体的参与，让公众参与，并培训下一代可再生能源科学家和工程师。德克萨斯州立大学是一所西班牙裔服务机构。拟议的项目将利用这一人才库来增加研究和STEM教育的多样性。技术：PI将使用最近开发的溶剂工具包对混合钙钛矿(HP)薄膜和太阳能电池器件进行电掺杂和表征。该溶剂工具包基于氢氟醚(HFE)溶剂系统，该系统对HPS不具破坏性，并允许对HP薄膜进行电化学表征和修饰。为了生产具有良好电学和光学性能的P和N掺杂器件，项目组将利用三种方法从溶剂工具包技术提供的各种可能器件中确定最佳器件组成。为了描述广阔的潜在实验场景，将使用密度泛函理论(DFT)进行数值模拟，以确定有利的掺杂混合物。随后，将在HFe电解液中进行HP薄膜的电化学研究，以实验实现诸如提高电导率和新的能级等掺杂效应。最后，基于电化学研究的掺杂策略将制造出惠普太阳能电池，并对电池的效率、结构和稳定性进行仔细的表征。更具体地说，我们将利用带Hubbard校正和自旋-轨道耦合的密度泛函理论研究不同离子掺杂对HP材料的能带结构、带隙、掺杂能级、反转对称性损失、Rashba效应、自旋织构、电子-声子耦合和量子限制的影响。电化学(EC)掺杂将在HFE溶剂中用计时电位法和计时电流法完成，并用循环伏安法、方波伏安法和使用定制多路芯片的电化学阻抗谱进行表征。惠普太阳能电池设备将由HFE工艺掺杂的薄膜制造，并对效率和寿命指标进行测试。我们随后将研究在器件受到光和温度循环的压力时，HP薄膜的EC掺杂如何影响器件的性能和稳定性。我们将关联HP-PV器件参数(功率转换效率、短路电流、开路电压、填充系数、磁滞等)的变化。这一奖项反映了NSF的法定使命，并通过使用基金会的智力优势和更广泛的影响审查标准进行评估，被认为值得支持。

项目成果

Leveraging a Stable Perovskite Composite to Satisfy Blue Electroluminescence Standards

• DOI: 10.1021/acsmaterialslett.1c00404
• 发表时间: 2021
• 期刊: ACS Materials Letters
• 影响因子: 11.4
• 作者: Aditya Mishra;Masoud Alahbakhshi;Q. Gu;A. Zakhidov;J. Slinker

Highly Efficient Quasi 2D Blue Perovskite Electroluminescence Leveraging a Dual Ligand Composition

• DOI: 10.1002/adfm.202214315
• 发表时间: 2023-04-06
• 期刊: ADVANCED FUNCTIONAL MATERIALS
• 影响因子: 19
• 作者: Alahbakhshi, Masoud;Mishra, Aditya;Zakhidov, Anvar A.
• 通讯作者: Zakhidov, Anvar A.

Bright and Effectual Perovskite Light-Emitting Electrochemical Cells Leveraging Ionic Additives

• DOI: 10.1021/acsenergylett.9b01925
• 发表时间: 2019-12-01
• 期刊: ACS ENERGY LETTERS
• 影响因子: 22
• 作者: Alahbakhshi, Masoud;Mishra, Aditya;Zakhidov, Anvar A.
• 通讯作者: Zakhidov, Anvar A.

Stable and Bright Electroluminescent Devices utilizing Emissive 0D Perovskite Nanocrystals Incorporated in a 3D CsPbBr 3 Matrix

利用结合在 3D CsPbBr 3 矩阵中的发射 0D 钙钛矿纳米晶体的稳定且明亮的电致发光器件

• DOI: 10.1002/adma.202203226
• 发表时间: 2022
• 期刊: Advanced Materials
• 影响因子: 29.4
• 作者: Mishra, Aditya;Bose, Riya;Zheng, Yangzi;Xu, Weijie;McMullen, Reema;Mehta, Abhas B.;Kim, Moon J.;Hsu, Julia W.;Malko, Anton V.;Slinker, Jason D.
• 通讯作者: Slinker, Jason D.

CdS/CdSe/CdS Spherical Quantum Wells with Near-Unity Biexciton Quantum Yield for Light-Emitting-Device Applications

• DOI: 10.1021/acsmaterialslett.3c00110
• 发表时间: 2023-04
• 期刊: ACS Materials Letters
• 影响因子: 11.4