非接触3次元形状計測による被服圧分布予測と快適性評価への応用

使用非接触式 3D 形状测量预测服装压力分布及其在舒适度评估中的应用

基本信息

  • 批准号:
    12780072
  • 负责人:
  • 金额:
    $ 1.54万
  • 依托单位:
  • 依托单位国家:
    日本
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
  • 财政年份:
    2000
  • 资助国家:
    日本
  • 起止时间:
    2000 至 2001
  • 项目状态:
    已结题

项目摘要

衣服着用の目的は,本来寒さや外部からの障害に対して身を護ることであったが,現在のライフスタイルの多様化により,文化や個性表現の身近な道具として様々な商品が望まれている.これら装飾としての機能は勿論のことであるが,着心地や快適性を無視することは無意味であり,衣服の総合的な評価方法の確立が問題となってくる.拘束性の高いファウンデーションガーメントの快適性評価手法として従来は,圧力センサを用いた衣服圧測定による接触式計測手法が一般的である.しかし,センサを直接人体に挿入するため被験者の心理的・生理的疲労が大きい,データの正確性など多くの問題が残っている.そこで,本研究では非接触計測による被服圧分布の推定方法についての基礎的研究を行った.非接触形状測定装置としてミノルタ製VIVIDを用いたが,従来3次元形状を測定するのが目的であるため運動前後の測定点の追跡が困難である.そこで,形状と同時に測定されるカラー画像と形状データを一致させることにより,ガードルの変形による点の移動を評価することにした.次に,得られた3次元データを2次元平面に投影し,姿勢によるガードル表面の歪みを2次元平面で評価する.このベクトル場に弾性体理論を用いて主歪みを求めることにより,ガードルの動的な歪み分布を評価している.その結果,姿勢変化に伴う歪み分布は衣服圧測定の変化と相関が認められ,歪みを評価することによりガードルの快適性の評価が可能であることが確認できた.次に,得られた歪み分布から被服圧を予測する方法を検討した.本研究での歪み分布の推定には弾性体理論を用いているので,応力-歪み行列によって応力の理論値は計算することはできる.しかし,これでは布の力学特性や人体の曲率の影響を考慮できず,実用的ではない.そこで,応力と歪みの間に任意の線形方程式を仮定し,布の引張り試験から得られるs-s曲線から定数項を推定し,この力学特性を考慮した方程式に,応力の理論値を代入することにより実用的な被服圧を推定する方法を試み,良好な結果を得ることができた.今後は,人体の曲率や衣服の滑りの問題等に対応することが課題である.
Clothes used to be used for the purpose. Originally, there was a bad situation in the outside world, but now there is a lot of trouble, and the cultural personality shows that you are close to the props, the props, the merchandise, and the goods. The machine is able to make sure that it is not necessary to pay attention to the safety of clothing, and that the method of clothing fitting is to make sure that the problem is correct. The restraints are similar to those of the contact device, which is usually used in the measurement of clothing. The direct human body is suffering from the psychological and physical fatigue of the victim, and the problem of multiple sexual problems is disabled. The purpose of this study is to study the method of presumption of the distribution of clothing in non-contact design. The non-contact shape measuring device uses the three-dimensional shape measurement device to determine the shape of the VIVID. The purpose is to track the target before and after the operation. At the same time, the image of the image is measured, the shape is consistent, and the point of the shape is moved. For the second time, you can get the projection of the third-dimensional plane and the second-dimensional plane, and the surface is crooked. Please tell me that you are not in a position to ask for information about your sexuality, and that the distribution of your movements is incorrect. The results show that the attitude changes are accompanied by distorted distribution of clothing, clothing, For the second time, you have to tell the truth that the distribution is distorted and the clothing is given to you. In this study, it is presumed that the distribution of distortions is related to the physiology of sex, and that the ranks and rows of forces are calculated. The mechanical properties of the cloth, the curvature of the human body, the curvature of the human body, the mechanical properties of the cloth, the mechanical properties of the cloth, the curvature of the human body, the curvature of the human body. In this paper, the equation of arbitrary shape is determined, the method of presumption of the fixed number of curves is obtained, the mechanical properties of the equation is tested, and the theory of force is substituted into the method of presumption of the equation used in the equation of mechanical properties. the method of presumption of force is valid, and good results can be obtained. In the future, the curvature of the human body, clothing, slippery clothes and other problems.

项目成果

期刊论文数量(2)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
佐々木 和也, 清水 裕子, 春日 正男, 長谷川 光司, 目加田 慶人: "人間の快適性に関する非接触計測手法の検討"宇都宮大学プロジェクト交流研究成果概要集. 平成11・12年度. 27-30 (2001)
Kazuya Sasaki、Yuko Shimizu、Masao Kasuga、Koji Hasekawa、Yoshito Mekada:“人体舒适度的非接触式测量方法的研究”宇都宫大学项目交流研究成果总结集1999-12(2001)。
  • DOI:
  • 发表时间:
  • 期刊:
  • 影响因子:
    0
  • 作者:
  • 通讯作者:
{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

佐々木 和也其他文献

佐々木 和也的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

{{ truncateString('佐々木 和也', 18)}}的其他基金

衣生活における子どもの消費行動に関する感覚的特徴の解析
儿童服饰生活消费行为相关感官特征分析
  • 批准号:
    17700225
  • 财政年份:
    2005
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Young Scientists (B)
熱性痙攣におけるToll-like receptorシグナルの遺伝的特性について
热性惊厥中Toll样受体信号的遗传特征
  • 批准号:
    17790711
  • 财政年份:
    2005
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Young Scientists (B)
ファウンデーションガーメントの圧迫感のモデル化と感性評価技術への応用
基础服装压力感建模及其在敏感性评估技术中的应用
  • 批准号:
    10780069
  • 财政年份:
    1998
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)

相似海外基金

熱的快適性に基づく都市屋外空間の人間行動モデル開発:人間行動気候学の構築へ
基于热舒适度的城市室外空间人类行为模型的开发:迈向人类行为气候学的构建
  • 批准号:
    24KJ1055
  • 财政年份:
    2024
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for JSPS Fellows
Hyperscanningによる木質空間における快適性の数値評価
使用超扫描对木质空间舒适度进行数值评估
  • 批准号:
    24K09018
  • 财政年份:
    2024
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
コホート型熱的快適性評価手法の開発
队列式热舒适评价方法的开发
  • 批准号:
    24H00350
  • 财政年份:
    2024
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Scientific Research (A)
Motion Sense-free Cabin:自動走行時の快適性向上を目的とした搭乗者の移動感覚制御
无体感驾驶室:控制乘客运动感觉,提高自动驾驶舒适度
  • 批准号:
    24K02978
  • 财政年份:
    2024
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
境界領域における建築インターフェイスの一体型滞在快適性評価に関する研究
边界区域建筑界面停留舒适度综合评价研究
  • 批准号:
    23K22935
  • 财政年份:
    2024
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
感染症対策用マスクの防護性能と快適性の両立に関する工学的検討
传染病防治用口罩兼具防护性能和舒适度的工程研究
  • 批准号:
    23K22995
  • 财政年份:
    2024
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
空間特性を考慮した半屋外空間の熱的快適性評価
考虑空间特征的半室外空间热舒适性评价
  • 批准号:
    24K17407
  • 财政年份:
    2024
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Early-Career Scientists
複数環境を対象とする数値連成解析を用いた住快適性の多角的評価手法の構築
利用针对多种环境的数值耦合分析,开发多方面的生活舒适度评估方法
  • 批准号:
    24KJ1765
  • 财政年份:
    2024
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for JSPS Fellows
快適な屋内空調環境づくりのためのセンサ融合による温熱快適性フロアマップ生成
利用传感器融合生成热舒适楼层地图,打造舒适的室内空调环境
  • 批准号:
    22K17885
  • 财政年份:
    2022
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Early-Career Scientists
境界領域における建築インターフェイスの一体型滞在快適性評価に関する研究
边界区域建筑界面停留舒适度综合评价研究
  • 批准号:
    22H01665
  • 财政年份:
    2022
  • 资助金额:
    $ 1.54万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了