入力に依存した専用回路による問題解法の高速化の研究

使用依赖于输入的专用电路加速问题解决的研究

基本信息

项目摘要

入力依存の専用回路を用いた高速問題解決の一般的手法を確立するために,本研究では次の3つを行い,実用化を目指した。(1)個別問題に対する入力依存の専用回路の設計と評価、(2)個別問題に対する前処理時間の短縮化、および(3)入力依存専用回路のメタプログラミングツールの開発個別問題に対して,入力依存の専用回路による計算の高速化の理論的解析を行うとともに,実際にFPGAを用いて専用回路の性能測定を行い,その有効性を検証を行った.個別問題として,画像検索だけでなく,組み合わせ最適化なども対象にした.また,FPGAを用いた性能評価のために,専用回路生成ソフトウェアと専用回路制御用ソフトウェアも開発した.最初の2年間で入力依存の専用回路を用いた高速問題解決に対する基本的な考え方を確立し、その考え方に基づいて幾つかの個別問題に対する専用回路の開発に取り組んできた。たとえば、専用回路化することにより純粋にソフトウェアで実現する場合よりも約1000倍の高速化を達成することなどができた.この結果は国際会議でも発表した.また、組み合わせ最適化問題にも同じ考え方を適用し、一定の成果を得ることができた。このように回路の構成に関して一定の成果を達成することができたが、将来の発展を考慮して新たな研究分野の開拓も行った。それは、計算幾何学の理論を画像処理の分野に応用することである。画像処理では雑音を如何に除去するかが問題であるが、これに対して計算幾何学のデータ構造に基づいた効率の良いモーフォロジカルオペレータを開発することに成功し、現在産業界で注目を集めている指紋同定に役立てようとしている。他にも距離変換の技法も非常に効果的であることが判明した。モーフォロジカルオペレータと距離変換は現在はまだソフト的に実現しているが、これを入力依存の考え方に基づいて回路設計することが今後の課題である。
In order to establish the general method of solving high speed problem, this study focuses on the application of force dependent circuit. (1)Design and evaluation of force-dependent special circuits for individual problems;(2) Shortening of pretreatment time for individual problems;(3) Theoretical analysis of speed-up calculation for force-dependent special circuits;(4) Performance measurement of special circuits for FPGA applications; and (5) Verification of dependability of special circuits for individual problems. Individual problems, picture problems, group problems, optimization problems. In addition,FPGA performance evaluation is performed in the application, and the application loop generation software is used to control the application loop. In the first 2 years, the basic test method for solving the high speed problem in the input dependent circuit was established, and the basic test method for solving the individual problem in the input dependent circuit was selected. For example, if you want to increase the speed of the engine, you can use the circuit to reduce the speed of the engine. The results of the international conference were presented. The problem of optimization is solved in the same way, and the results are obtained. The composition of the circuit is related to the achievement of certain results, and the development of new research areas is considered. The theory of computational geometry is applied to the field of image processing. How to remove the problem of image processing? How to remove the problem of image processing? He is a very good judge. The distance between the two sides of the bridge is different. The distance between the two sides is different. The distance between the distance between the two sides is different. The distance between the distance between the two sides is different. The distance between the distance between the two sides is different. The distance between the distance between the two sides is different. The

项目成果

期刊论文数量(35)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
T.Asano, N.Katoh, K.Kawashima: "A New Approximation Algorithm for the capacitated Vehicle Routing Problem on a Tree"Journal of Combinatorial Optimization. (採録決定).
T.Asano、N.Katoh、K.Kawashima:“树上容量车辆路径问题的新近似算法”组合优化杂志(已接受)。
  • DOI:
  • 发表时间:
  • 期刊:
  • 影响因子:
    0
  • 作者:
  • 通讯作者:
Arranging Fewest Possible Probes to Detect a Hidden Object with Industrial Application
布置尽可能少的探针来检测隐藏物体的工业应用
Koji Nakano, Etsuko Takamichi: "An Image Retrieval System Using FPGAs"IEICE Transactions on Computer and Systems. (採録決定).
Koji Nakano、Etsuko Takamichi:“使用 FPGA 的图像检索系统”IEICE Transactions on Computer and Systems(已接受)。
  • DOI:
  • 发表时间:
  • 期刊:
  • 影响因子:
    0
  • 作者:
  • 通讯作者:
T.Asano, Y.Kawamura, R.Klette, K.Obokata: "Digital Curve Approximation with Length Evaluation"IEICE Trans. on Fundamentals. E86-A,5. (2003)
T.Asano、Y.Kawamura、R.Klette、K.Obokata:“带有长度评估的数字曲线近似”IEICE Trans。
  • DOI:
  • 发表时间:
  • 期刊:
  • 影响因子:
    0
  • 作者:
  • 通讯作者:
The Structure and Number of Global Roundings of a Graph
图的结构和全局舍入的数量
{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

浅野 哲夫其他文献

浅野 哲夫的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

{{ truncateString('浅野 哲夫', 18)}}的其他基金

Desigining algorithms for commodities transportation on a planar graph modeling a map
设计平面图上的商品运输算法对地图进行建模
  • 批准号:
    20K11673
  • 财政年份:
    2020
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
幾つかの画像関連問題の計算複雑度の解析と効率的な解決法の提案
分析一些图像相关问题的计算复杂度并提出有效的解决方案
  • 批准号:
    16092209
  • 财政年份:
    2004
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas
計算幾何学における関連問題のクラス
计算几何中的一类相关问题
  • 批准号:
    97F00029
  • 财政年份:
    1998
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for JSPS Fellows
計算幾何学のVLSI設計への応用
计算几何在VLSI设计中的应用
  • 批准号:
    61750347
  • 财政年份:
    1986
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
歯の形態の定量的類型化に関する基礎研究
牙齿形态定量分类的基础研究
  • 批准号:
    57780044
  • 财政年份:
    1982
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
慣性主軸による三次元不定形物体の軸合わせに基づく形状比較に関する研究
基于惯性主轴对准三维非晶物体的形状比较研究
  • 批准号:
    56790036
  • 财政年份:
    1981
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
確率的手法によるビルディングブロック方式LSIのブロック内配線設計システムの開発
使用概率方法开发积木型LSI的块内布线设计系统
  • 批准号:
    X00210----575239
  • 财政年份:
    1980
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
LSIレイアウトパターン自動設計システムの開発
自动LSI布局图案设计系统的开发
  • 批准号:
    X00210----375197
  • 财政年份:
    1978
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)

相似国自然基金

基于FPGA的嗅觉系统神经计算芯片及其机器嗅觉应用研究
  • 批准号:
    MS25F030039
  • 批准年份:
    2025
  • 资助金额:
    0.0 万元
  • 项目类别:
    省市级项目
基于FPGA的冷媒气体传感器海量数据高速采集处理系统的研发
  • 批准号:
  • 批准年份:
    2025
  • 资助金额:
    0.0 万元
  • 项目类别:
    省市级项目
基于 FPGA 的超图计算加速器关键技术研究
  • 批准号:
    Q24F020078
  • 批准年份:
    2024
  • 资助金额:
    0.0 万元
  • 项目类别:
    省市级项目
数据流驱动的面向FPGA集群的混合计算粒度DCNN加速器设计理论、优化方法与关键技术研究
  • 批准号:
  • 批准年份:
    2024
  • 资助金额:
    15.0 万元
  • 项目类别:
    省市级项目
FPGA高层次综合的能效优化方法研究
  • 批准号:
  • 批准年份:
    2024
  • 资助金额:
    15.0 万元
  • 项目类别:
    省市级项目
面向FPGA的阻变型抗辐射配置存储器的单粒子效应与加固技术研究
  • 批准号:
    62374019
  • 批准年份:
    2023
  • 资助金额:
    48.00 万元
  • 项目类别:
    面上项目
面向智能网卡的可扩展FPGA包分类技术研究
  • 批准号:
    62372123
  • 批准年份:
    2023
  • 资助金额:
    50 万元
  • 项目类别:
    面上项目
面向领域应用的FPGA图计算异构并行算法探索与研究
  • 批准号:
    n/a
  • 批准年份:
    2023
  • 资助金额:
    10.0 万元
  • 项目类别:
    省市级项目
布线质量驱动的3D FPGA布局算法研究
  • 批准号:
    62374138
  • 批准年份:
    2023
  • 资助金额:
    48 万元
  • 项目类别:
    面上项目
递归神经网络在FPGA上低功耗、可扩展、分布式的实现
  • 批准号:
    62311530099
  • 批准年份:
    2023
  • 资助金额:
    10 万元
  • 项目类别:
    国际(地区)合作与交流项目

相似海外基金

CSR: Small: Multi-FPGA System for Real-time Fraud Detection with Large-scale Dynamic Graphs
CSR:小型:利用大规模动态图进行实时欺诈检测的多 FPGA 系统
  • 批准号:
    2317251
  • 财政年份:
    2024
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Standard Grant
CAREER: Efficient Large Language Model Inference Through Codesign: Adaptable Software Partitioning and FPGA-based Distributed Hardware
职业:通过协同设计进行高效的大型语言模型推理:适应性软件分区和基于 FPGA 的分布式硬件
  • 批准号:
    2339084
  • 财政年份:
    2024
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Continuing Grant
Collaborative Research: DESC: Type II: REFRESH: Revisiting Expanding FPGA Real-estate for Environmentally Sustainability Heterogeneous-Systems
合作研究:DESC:类型 II:REFRESH:重新审视扩展 FPGA 空间以实现环境可持续性异构系统
  • 批准号:
    2324865
  • 财政年份:
    2023
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Standard Grant
原子スイッチFPGAの素粒子実験への応用研究
原子开关FPGA在基本粒子实验中的应用研究
  • 批准号:
    23K03439
  • 财政年份:
    2023
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Elements: Portable Library for Homomorphic Encrypted Machine Learning on FPGA Accelerated Cloud Cyberinfrastructure
元素:FPGA 加速云网络基础设施上同态加密机器学习的便携式库
  • 批准号:
    2311870
  • 财政年份:
    2023
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Standard Grant
MPLAPACKのFPGA/GPUによるアクセラレーションとアプリケーションでの性能評価
MPLAPACK FPGA/GPU 加速和应用程序性能评估
  • 批准号:
    23K11133
  • 财政年份:
    2023
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Graph Neural Network Inference on Multi-FPGA Clusters
多 FPGA 集群上的图神经网络推理
  • 批准号:
    2894270
  • 财政年份:
    2023
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Studentship
SaTC: CORE: Small: Security of FPGA-as-a-Service Reconfigurable Systems
SaTC:核心:小型:FPGA 即服务可重构系统的安全性
  • 批准号:
    2310142
  • 财政年份:
    2023
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Standard Grant
SaTC: CORE: Small: Emerging Security Challenges and a Solution Framework for FPGA-accelerated Cloud Computing
SaTC:CORE:小型:新兴安全挑战和 FPGA 加速云计算的解决方案框架
  • 批准号:
    2247059
  • 财政年份:
    2023
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Standard Grant
FPGAでのストリーム画像処理による低レイテンシ振動成分抽出システムの実現
在FPGA上利用流图像处理实现低延迟振动分量提取系统
  • 批准号:
    23K16859
  • 财政年份:
    2023
  • 资助金额:
    $ 2.18万
  • 项目类别:
    Grant-in-Aid for Early-Career Scientists
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了