Development of green stainless steels by micro-and nano-scale surface design and control
通过微米和纳米级表面设计和控制开发绿色不锈钢
基本信息
- 批准号:20246106
- 负责人:
- 金额:$ 31.37万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Scientific Research (A)
- 财政年份:2008
- 资助国家:日本
- 起止时间:2008 至 2010
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
In order to develop a new passivation method for removing MnS from the surface of stainless steels and forming a Cr enriched passive film on the surface, microelectrochemical electrochemical properties of MnS and chemical dissolution behaviors of MnS in chelate-containing solutions have been examined. It was found that citric acid system solutions are effective to remove MnS and to improve corrosion resistance of stainless steels.
为了开发一种从不锈钢表面去除MnS并在表面形成富铬钝化膜的新的钝化方法,研究了MnS的微电化学性质和MnS在含螯合物溶液中的化学溶解行为。结果表明,柠檬酸体系溶液能有效去除不锈钢中的MnS,提高不锈钢的耐蚀性。
项目成果
期刊论文数量(28)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
Fe-10Cr合金の耐食性に及ぼすSi, Cu, N添加の効果のコンビナトリアル評価
Si、Cu、N添加对Fe-10Cr合金耐蚀性影响的组合评价
- DOI:
- 发表时间:2009
- 期刊:
- 影响因子:0
- 作者:榑林光一;武藤泉;原信義
- 通讯作者:原信義
Microelectrochemical Investigation of Hydrogen Absorption and Dissolution Behavior of MnS Inclusions in Carbon Steel
- DOI:10.1149/1.3577749
- 发表时间:2011-04
- 期刊:
- 影响因子:0
- 作者:I. Muto;Junichi Shinozaki;T. Omura;M. Numata;N. Hara
- 通讯作者:I. Muto;Junichi Shinozaki;T. Omura;M. Numata;N. Hara
MnS系介在物の化学的除去処理によるステンレス鋼表面の高耐食化
通过化学去除MnS系夹杂物处理,使不锈钢表面具有高耐腐蚀性
- DOI:
- 发表时间:2010
- 期刊:
- 影响因子:0
- 作者:原信義;滝沢友暁;武藤泉
- 通讯作者:武藤泉
実不働態皮膜から人工不働態皮膜へ, そして再び実不働態皮膜へ
从真正的钝化膜到人造钝化膜,再回到真正的钝化膜
- DOI:
- 发表时间:2010
- 期刊:
- 影响因子:0
- 作者:O.Ciuca;K.Tsuchiya;Y.Yokoyama;Y.Todaka;M.Umemoto;大塚哲也・後藤治・吉澤政己;原信義
- 通讯作者:原信義
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
HARA Nobuyoshi其他文献
HARA Nobuyoshi的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('HARA Nobuyoshi', 18)}}的其他基金
Development of CWD process for surface treatment of magnesium
镁表面处理CWD工艺的开发
- 批准号:
22656159 - 财政年份:2010
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Challenging Exploratory Research
Development of an External Pressure Balance Reference Electrode for Use in Supercritical Water Systems
开发用于超临界水系统的外部压力平衡参比电极
- 批准号:
14350377 - 财政年份:2002
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Cathodic Degradation of Passive Films on Ti in High-Level Radioactive Waste Disposal Environments
高放射性废物处置环境中钛钝化膜的阴极降解
- 批准号:
10450266 - 财政年份:1998
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (B).
Development of Dissolved Hydrogen Sensors for High Temperature Water Systems
高温水系统溶解氢传感器的开发
- 批准号:
09555213 - 财政年份:1997
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Development of Solid Electrolyte ECP Sensor for High Temperature Water System
高温水系统固体电解质ECP传感器的研制
- 批准号:
08650828 - 财政年份:1996
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Development of MOS Capacitor Dissolved Oxygen Sensor for Use in High-Temperature Solutions
开发用于高温解决方案的 MOS 电容器溶解氧传感器
- 批准号:
07555214 - 财政年份:1995
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Development of YSZ pH sensor for Use in High Temperature Solutions
开发用于高温溶液的 YSZ pH 传感器
- 批准号:
06650791 - 财政年份:1994
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for General Scientific Research (C)
Formation of High Corrosion Resistant Artificial Passivation Films by LP-MOCVD
LP-MOCVD 形成高耐蚀人工钝化膜
- 批准号:
03650565 - 财政年份:1991
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for General Scientific Research (C)
相似海外基金
ひずみ誘起マルテンサイトを導入したステンレス鋼溶接金属の水素脆性評価
引入应变诱导马氏体不锈钢焊缝金属的氢脆评估
- 批准号:
24K07226 - 财政年份:2024
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
ステンレス鋼の微生物腐食-MnS介在物の溶解に基づく腐食発生メカニズムの解明-
不锈钢的微生物腐蚀 - 基于 MnS 夹杂物溶解的腐蚀发生机制的阐明 -
- 批准号:
24K17538 - 财政年份:2024
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Early-Career Scientists
新規表面処理とレーザプロセスの融合による次世代超高耐食・機能性ステンレス鋼の開発
结合新型表面处理与激光加工开发新一代超高耐腐蚀功能不锈钢
- 批准号:
24K01223 - 财政年份:2024
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
希少耐食元素を濃化領域として活用した新規高耐食ステンレス鋼の創製
利用稀有耐腐蚀元素作为富集区创建新型高耐腐蚀不锈钢
- 批准号:
22KJ0240 - 财政年份:2023
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for JSPS Fellows
医療用ステンレス鋼の耐食性を向上させる新規プロセスの開発
开发提高医用不锈钢耐腐蚀性能的新工艺
- 批准号:
22KJ1204 - 财政年份:2023
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for JSPS Fellows
肉盛溶射により小入熱で接合されたステンレス鋼補剛板の耐荷力に関する研究
堆焊热喷涂低热输入不锈钢加强板承载能力研究
- 批准号:
23KJ1213 - 财政年份:2023
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for JSPS Fellows
低炭素オーステナイト系ステンレス鋼の非熱鋭敏化SCC機構解明研究
低碳奥氏体不锈钢非热敏化SCC机理研究
- 批准号:
23K04428 - 财政年份:2023
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
光触媒を第二相とする省資源型高耐食ステンレス鋼の創製とナノレベル電気化学反応解析
以光触媒为第二相的资源节约型高耐腐蚀不锈钢的创制及纳米级电化学反应分析
- 批准号:
22H00254 - 财政年份:2022
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (A)
低温プラズマ処理による二相ステンレス鋼複合造形物の高機能化
通过低温等离子处理提高双相不锈钢复合材料的功能
- 批准号:
21K04733 - 财政年份:2021
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
ステンレス鋼から六価クロムを含む酸化水酸化物が生成する下限温度の調査
不锈钢形成含六价铬的氢氧化物的温度下限的研究
- 批准号:
21K12282 - 财政年份:2021
- 资助金额:
$ 31.37万 - 项目类别:
Grant-in-Aid for Scientific Research (C)














{{item.name}}会员




