出土木材における含水率の非破壊的推測法について

出土木材含水率无损估算方法

基本信息

  • 批准号:
    63510231
  • 负责人:
  • 金额:
    $ 0.96万
  • 依托单位:
  • 依托单位国家:
    日本
  • 项目类别:
    Grant-in-Aid for General Scientific Research (C)
  • 财政年份:
    1988
  • 资助国家:
    日本
  • 起止时间:
    1988 至 无数据
  • 项目状态:
    已结题

项目摘要

この研究のポイントは、出土木材の木質部分のみの比重(真比重)の値あるいはそのバラツキが含水率の推測値の精度に影響することである。このため、各地の遺跡より出土した様々な劣化状態及びこれらの様々な樹種のサンプル材(縄文時代〜中世の出土材)約100点を入手し、各資料について空中重量、水中重量、含水率(実測値)を測定し、これらの測定値から出土木材の木質部分のみの比重(真比重)を算出し、そのバラツキがどのようになっているかを検討した。この結果、出土木材の木質部分のみの比重は、1.30〜1.62の間に分布しており、比重1.35〜1.57の間では1.47に中心を持つ正規分布に近い分布を示していることが明らかとなった。また、この比重は樹種とは関係なく、各資料の劣化状態により異なることも明らかとなった。つまり、含水率(実測値)300%以下では、比重は1.50よりも高い値を示す傾向が認められた。(現生木材の木質の真比重が1.50であるため劣化の少ない材では、埋蔵環境からの異物の沈着により真比重が高くなっていると推測される。)それ以上の含水率(実測値)では劣化状態(含水率(実測値))に関係なく1.40〜1.50の間の値を取ることが明らかとなった。このようにしてもとめられた比重の平均は、ほぼ1.47の値を取る。出土木材の木質部分のみの比重としてこの値を用いて推測含水率を算出し、実測によりもとめられた含水率と比較すると劣化の進んでいない材(含水率の低い材)では、推測含水率は実測値に比較しやや低い値を示し、劣化の進んだ材(含水率の高い材)では、推測含水率は高い値を示した。しかし、このようにして求められた推測含水率と実測値は極めて高い相関性があることが明らかとなった。
This study focuses on the specific gravity (true specific gravity) of the wood part of the excavated wood and its influence on the accuracy of the estimation of moisture content. About 100 points were measured for each data, including weight in air, weight in water, and moisture content (measured value). The specific gravity (true specific gravity) of the woody part of the excavated wood was calculated. As a result, the specific gravity of the wood part of the unearthed wood is distributed between 1.30 and 1.62, and the specific gravity is distributed between 1.35 and 1.57, and the center is distributed regularly. The deterioration status of each data is different. Water content (measured value) below 300%. Specific gravity below 1.50%. High value. (The true specific gravity of the wood of the living wood is 1.50 The water content (measured value) above is related to the deterioration state (water content (measured value)), and the value between 1.40 and 1.50 is related to the deterioration state. On average, the ratio was 1.47. The specific gravity of the wood part of the excavated wood is calculated, measured, and compared with the estimated moisture content. The estimated moisture content is calculated, measured, and compared with the estimated moisture content. The estimated moisture content is calculated, measured, and compared with the estimated moisture content. The water content is estimated to be very high and the correlation is high.

项目成果

期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

松田 隆嗣其他文献

松田 隆嗣的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

{{ truncateString('松田 隆嗣', 18)}}的其他基金

弓の用材の変遷とその分布圏の変化に関する研究
弓材料演变及其分布区域变化研究
  • 批准号:
    58710207
  • 财政年份:
    1983
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)

相似国自然基金

基于物理经验约束的高含水油水两相流含水率软测量方法研究
  • 批准号:
  • 批准年份:
    2025
  • 资助金额:
    0.0 万元
  • 项目类别:
    省市级项目
动力扰动下不同含水率充填体损伤机理及调控方法
  • 批准号:
  • 批准年份:
    2024
  • 资助金额:
    0.0 万元
  • 项目类别:
    省市级项目
全固废低碳胶凝材料固化高含水率泥浆力学性能及微观 机理
  • 批准号:
    2024JJ6510
  • 批准年份:
    2024
  • 资助金额:
    0.0 万元
  • 项目类别:
    省市级项目
融合 SAR与光学影像的森林可燃物三维含水率重建 与林火风险预警
  • 批准号:
    2024JJ2100
  • 批准年份:
    2024
  • 资助金额:
    0.0 万元
  • 项目类别:
    省市级项目
复合金属氧化物床料作用下高含水率有机固废阴燃特性及模型研究
  • 批准号:
  • 批准年份:
    2024
  • 资助金额:
    15.0 万元
  • 项目类别:
    省市级项目
原油拓扑动力学牵引下的含水率建模关键技术研究
  • 批准号:
    62306209
  • 批准年份:
    2023
  • 资助金额:
    30 万元
  • 项目类别:
    青年科学基金项目
森林地表细小死可燃物含水率地-空半物理模型预测方法研究
  • 批准号:
    32371864
  • 批准年份:
    2023
  • 资助金额:
    50 万元
  • 项目类别:
    面上项目
顾及云雾干扰的林区可燃物含水率光学和微波遥感联合反演
  • 批准号:
  • 批准年份:
    2022
  • 资助金额:
    30 万元
  • 项目类别:
    青年科学基金项目
含水率演化下高铁路基动力累积塑性变形的物理信息神经网络方法研究
  • 批准号:
    52208378
  • 批准年份:
    2022
  • 资助金额:
    30 万元
  • 项目类别:
    青年科学基金项目
融合流形学习、深度学习与主动学习的桑叶多元化开发场景下含水率光谱检测研究
  • 批准号:
  • 批准年份:
    2022
  • 资助金额:
    30 万元
  • 项目类别:
    青年科学基金项目

相似海外基金

高含水率坑井の水生産抑制に向けたWeakゲル開発と広域流体制御技術の向上
开发弱凝胶并改进广域流体控制技术以抑制高含水井产水
  • 批准号:
    24K08317
  • 财政年份:
    2024
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
米麹発酵プロセスのMRI計測と数値解析:温度・含水率・酵素生成の連成モデルの構築
米曲发酵过程的MRI测量和数值分析:温度、水分含量和酶产生耦合模型的构建
  • 批准号:
    24K07363
  • 财政年份:
    2024
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
高機動ロボットと非破壊試験技術の融合によるRC構造物のかぶり・含水率分布の可視化
通过高机动机器人与无损检测技术的融合,实现钢筋混凝土结构起雾和含水率分布的可视化
  • 批准号:
    24K07634
  • 财政年份:
    2024
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
低炭素型コンクリートの細孔構造変化および含水率分布に基づく物質移動抵抗性評価
基于低碳混凝土孔隙结构变化和含水率分布的传质阻力评价
  • 批准号:
    24K07750
  • 财政年份:
    2024
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
建築物の凍害リスク評価のための超高含水率領域における熱水分移動現象のモデル化
超高含水量区域的热湿传递现象建模,用于评估建筑物冻害风险
  • 批准号:
    23K13451
  • 财政年份:
    2023
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Grant-in-Aid for Early-Career Scientists
Moss-peat gradients of physical properties and moisture content from drone images
无人机图像中的苔藓-泥炭物理特性和水分含量梯度
  • 批准号:
    562507-2021
  • 财政年份:
    2021
  • 资助金额:
    $ 0.96万
  • 项目类别:
    University Undergraduate Student Research Awards
含水率の影響を受けない表面吸水試験によるコンクリート構造物の耐久性評価手法の確立
建立不受含水量影响的表面吸水试验评价混凝土结构耐久性的方法
  • 批准号:
    21K04210
  • 财政年份:
    2021
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Cracker manufacture process improvement through moisture content characterisation at all stages of production
通过生产各个阶段的水分含量表征来改进饼干制造工艺
  • 批准号:
    106029
  • 财政年份:
    2020
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Collaborative R&D
Forecasting live fuel moisture content, the on/off switch for forest fire
预测现场燃料水分含量,森林火灾的开关
  • 批准号:
    LP190100436
  • 财政年份:
    2020
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Linkage Projects
Decreasing the moisture content variation of flakes in the drying process of Oriented Strand Board (OSB) manufacturing using multivariate time-series pattern discovery
使用多元时间序列模式发现来减少定向刨花板 (OSB) 制造干燥过程中薄片的含水量变化
  • 批准号:
    529533-2018
  • 财政年份:
    2018
  • 资助金额:
    $ 0.96万
  • 项目类别:
    Engage Grants Program
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了