水平打継を有するRC梁の曲げせん断応力下での変形特性把握のための実験研究

水平缝RC梁弯剪应力变形特性试验研究

基本信息

  • 批准号:
    02650409
  • 负责人:
  • 金额:
    $ 0.9万
  • 依托单位:
  • 依托单位国家:
    日本
  • 项目类别:
    Grant-in-Aid for General Scientific Research (C)
  • 财政年份:
    1990
  • 资助国家:
    日本
  • 起止时间:
    1990 至 无数据
  • 项目状态:
    已结题

项目摘要

鉄筋コンクリ-ト造建物(RC)の合理的設計法、新技術の展開の中での設計・施工法の確立を目標に、プレキャスト化が進められている。特に、部分をプレキャスト化し、残りを場所打コンクリ-トにより一体化させていく、いわゆる、ハ-フプレキャスト構・工法は、建設技術の近代化を従来より積み重ねられた施工技術の信頼性に立脚していると認識しやすく、積極的な利用が進められている。RCはリ部材については、床スラブにハ-フプレキャスト板が使用されることより、水平打継を有することになる。水平打継を有するRCはリ部材のせん断耐力は、せん断補強筋量が少ない場合、打継面に沿って水平ずれおよび開きが顕著に生じ、耐力評価にあたって一体打ちに比べた場合低い値となることが重要なこととしてきた。本研究では、はり部材の曲げ耐力を2水準に設定し、それらについて、せん断補強量を3水準で補強し、水平打継の有無の要因のもとで合計12体の試験体を作製し、実験結果を比較検討することとした。実験の結果、打ち継きを有する場合、一体打ちとは異なった破壊性状を示し、剛性、耐力の低下は著しい。これは、せん断補強筋量が少なく、せん断余裕度が小さい場合に顕著に見られた。また、全体変形における水平打継面のずれ変形量の割合が示めされ、復元力特性下におけるスリップ型変形性状との対応も明らかにすることができた。なお、水平打継を有するせん断耐力評価について、既往の研究成果と今回の成果とを総合的に検討し、ずれせん断引張破壊とずれせん断圧縮破壊毎の評価を示している。
The reasonable design method of steel reinforced concrete (RC), the establishment of design and construction method in the development of new technology, and the development of new technology. In particular, some of the construction technologies have been transformed and the remaining areas have been integrated into the construction technology, and the modernization of the construction technology has been carried out. RC components are used in a variety of ways. For horizontal impact, the RC component has a small amount of reinforcement, and the impact surface has a small amount of reinforcement. For horizontal impact, the RC component has a small amount of reinforcement, and the impact surface has a small amount of reinforcement. In this study, the bending endurance of the components was set at 2 levels, the strength of the components was set at 3 levels, and the strength of the components was set at 3 levels. The result of the test, the test of the test, the test of the test of the test, the test of the test, the test of the test of the test, the test of the The amount of reinforcement is small and the allowance is small. The horizontal surface of the whole body is divided into two parts, namely, the horizontal surface is divided into two parts, and the horizontal surface is divided into two parts. The results of previous research, current research and combined research are discussed in detail. The results of current research and combined research are shown in the following paragraphs.

项目成果

期刊论文数量(1)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
松崎 育弘: "水平打継を有するRC梁のせん断補移筋の有効応力について" 日本建築学会大会学術講演梗概集. (1991)
松崎郁弘:“关于水平接缝钢筋混凝土梁的有效应力”日本建筑学会会议学术讲座摘要(1991)。
  • DOI:
  • 发表时间:
  • 期刊:
  • 影响因子:
    0
  • 作者:
  • 通讯作者:
{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

松崎 育弘其他文献

2140 高性能コンクリートの付着性状に関する実験的研究(付着・定着・継手)
2140 高性能混凝土粘结性能试验研究(粘结、固定、接缝)
  • DOI:
  • 发表时间:
    2002
  • 期刊:
  • 影响因子:
    0
  • 作者:
    吉田 藍子;松本 至;中野 克彦;松崎 育弘
  • 通讯作者:
    松崎 育弘

松崎 育弘的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

{{ truncateString('松崎 育弘', 18)}}的其他基金

水平打継を有するRC梁のせん断耐力評価に関する研究
水平缝RC梁抗剪强度评估研究
  • 批准号:
    01550449
  • 财政年份:
    1989
  • 资助金额:
    $ 0.9万
  • 项目类别:
    Grant-in-Aid for General Scientific Research (C)
鉄筋コンクリート造T形梁のせん断耐力に関する実験的研究
钢筋混凝土T梁抗剪强度试验研究
  • 批准号:
    62550419
  • 财政年份:
    1987
  • 资助金额:
    $ 0.9万
  • 项目类别:
    Grant-in-Aid for General Scientific Research (C)
機器・配管等支持構造物(アンカーボルトの定着)の耐力および変形性状に関する研究
设备、管道等支撑结构(锚栓锚具)强度及变形性能研究
  • 批准号:
    57550355
  • 财政年份:
    1982
  • 资助金额:
    $ 0.9万
  • 项目类别:
    Grant-in-Aid for General Scientific Research (C)
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了