The construction of wood identification system with the aid of loading microscopic images of wood

加载木材显微图像的木材识别系统的构建

• 批准号: 06556030
• 负责人: ITOH Takao
• 金额: $ 3.07万
• 依托单位: KYOTO UNIVERSITY
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Developmental Scientific Research (B)
• 财政年份: 1994
• 资助国家: 日本
• 起止时间: 1994 至 1995
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-06556030/
• 关键词: Wood Identification; Wood Structure; Tree Species; Wood Micrograph; 樹種検索システム; 木材組織; 針葉樹材; 広葉樹材; 樹種検索; 樹種別記載; 顕微鏡画像

The purpose of this study is to make wood identification system assisted by computor with a characteristic of loading microscopic image of wood structure. For this purpose, we made "wood idectification card" applicable for computor. Then, we made "standard wood identification card" after completing the description of microscopic features of wood. Furthermore, we have loaded the microscopic images of three directional sections using scanner. After preparing these procedures, we practiced wood identification as follows : we made microscopic preparations from the unknown wood blocks ; we made a mark in "wood identification card" for the characteristic features of wood by observing the microscopic preparation ; we picked up "standard wood identification card" corresponding to "wood identification card" of unknown wood species.These are the outlines of wood identification system we have made in this study.

本研究的目的是建立一个具有加载木材结构显微图像特点的计算机辅助木材识别系统。为此，我们制作了适用于计算机的“木材鉴定卡”。在完成木材微观特征描述的基础上，制作了《标准木材鉴定卡》。此外，我们还利用扫描仪加载了三个方向切片的显微图像。在准备好这些程序后，我们进行了木材鉴定的实践，即对未知的木材块进行显微标本的制作，通过观察标本的显微特征，在“木材鉴定卡”上做上标记，并在木材鉴定卡上做上标记。我们拿起“标准木材鉴定卡”对应“木材鉴定卡”这些是我们在本研究中所建立的木材识别系统的轮廓。

项目成果

伊東隆夫: "日本産広葉樹材の解剖学的記載I" 木材研究・資料. 31. 81-181 (1995)

Takao Ito：“日本硬木木材的解剖描述 I”《木材研究与材料》31. 81-181 (1995)。

T.Itoh: "Anatomical Description of Japanese Hardwoods I" Wood Research & Technical Notes. No.31. 81-181

T.Itoh：《日本硬木的解剖描述 I》木材研究