Development of a Agent Oriented System to Realize Shape Design Based on Kansei Method

基于感性方法的面向Agent实现形状设计的系统开发

• 批准号: 10555043
• 负责人: AOYAMA Hideki
• 金额: $ 4.86万
• 依托单位: Keio University
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Scientific Research (B)
• 财政年份: 1998
• 资助国家: 日本
• 起止时间: 1998 至 1999
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-10555043/
• 关键词: virtual reality; virtual clay modeling; aesthetic design; Kansei engineering; style concept design

This research has been carried out for two years (from April 1998 to March 2000). The objective of this research is to develop a system which realize a high quality model form shape image by the Kansei method with agent function. The objective was achived by developing the following subsystems (a)-c and constructing the integrated system (d);(a) Development of subsystem for constructing rough modelA subsystem, which constructs the virtual clay model from a shape image with a data glove, a stereoscopic vision device, a force feed back device, and a workstation, was construct. And, a subsystem to construct rough computer model from a sketch was also developed.(b) Development of subsystem for constructing precise modelA subsystem, whch modifies the rough model and creates precise model by approximating a small area on the rough model with a quadric surface, was developed.c Development of subsystem for constructing complete modelA subsystem, which constructs the complete model by re-modifying the precise model with adjusting the shape according to the high-light lines(d) Development of integrated system to realize model form imageA system to construct a computer model from a shape image was developed by integrating the above mentioned subsystems and incorporating the agent functions.

本研究历时两年（1998年4月至2000年3月）。本课题的研究目标是开发一个具有智能体功能的感性方法实现高质量模型形状图像的系统。通过发展下列子系统(a)-c和构建综合系统(d)实现了这一目标；(a)构建粗模型子系统的开发构建了一个利用数据手套、立体视觉装置、力反馈装置和工作站从形状图像构建虚拟粘土模型的子系统。此外，还开发了一个由草图构建计算机模型的子系统。(b)开发了构建精密模型子系统a子系统，该子系统通过对粗糙模型进行修正，在粗糙模型上用二次曲面逼近一个小区域，建立精确模型。通过对精确模型进行再修改，并根据高光线调整形状，构建完整的模型。(d)实现模型成形图像的集成系统开发通过集成上述子系统，结合agent功能，开发了从形状图像构建计算机模型的系统。

项目成果

藤木宏之: "曲面形状の簡易入力システム" 機械学会 第1回生産加工・工作機械部門講演会講演論文集. (4月発表予定). (1999)

Hiroyuki Fujiki：“曲面形状的简单输入系统”日本机械工程师学会第一届生产加工和机床部门会议论文集（预定于 4 月发表）（1999 年）。

Hiroyuki Fujiki: "Development of Virtual Clay Modeling System" Proceedings of the 32nd CIRP International Seminar on Manufacturing Systems. (5月発表予定). (1999)

Hiroyuki Fujiki：“虚拟粘土建模系统的开发”第 32 届 CIRP 国际制造系统研讨会论文集（计划于 5 月发表）。

藤木宏之: "曲面形状の簡易入力システム"機械学会 第1回生産加工・工作機械部門講演会講演論文集. 233-234 (1999)

Hiroyuki Fujiki：“弯曲形状的简单输入系统”日本机械工程师学会第一届生产加工和机床分会会议记录 233-234 (1999)。

Hideki Aoyama: "Autonomous Measurement of Physical Model for Reverse Engineering"Pournal of JSPE. 65, No.7. 1016-1020 (1999)

Hideki Aoyama：“逆向工程物理模型的自主测量”JSPE 期刊。

Takeo Kusunoki: "Shape Modeling Based on Character Lines"Proc of 2000 JSPE Spring Annual Meeting. (2000)

Takeo Kusunoki：“基于字符线的形状建模”2000年JSPE春季年会会议记录。