Development of assisting system for style design based on visual Kansei Language

基于视觉感性语言的造型设计辅助系统开发

• 批准号: 11650138
• 负责人: AOYAMA Hideki
• 金额: $ 2.24万
• 依托单位: Keio University
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Scientific Research (C)
• 财政年份: 1999
• 资助国家: 日本
• 起止时间: 1999 至 2000
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-11650138/
• 关键词: style design; feeling (Kansei); Kansei Language; modeling; high quality surface

The followings are the objectives of this research :(1) Analysis and extraction of language (Kansei Language) which represents the style design in human feeling.(2) Development of an assisting system for style design which is driven by Kansei Language(3) Development of a constructing system of the high quality style-formThe results of this study are as follows :(1) Language which means the feeling for the style form is extracted and defined as Kansei Language.(2) The form-parameters determining the form which are controlled by the Kansei Language are derived.(3) The concept design of an assisting system for the style design which executes the form-modeling and form-modification by changing the form-parameters with the Kansei Language was performed.(4) The basic and detail design of the assisting system for the style design was done and the system was developed.(5) The concept design of a system which constructs high quality surface form with the engineering parameters such as the high light lines and the curvature distribution by the Lansei Language was performed.(6) The basic and detail design of a system to construct high quality surface form was done and the system was then developed.

本研究的主要目的为：（1）分析与萃取代表风格设计的感性语言（感性语言）。(2)（3）开发高质量风格形式的构造系统本研究的主要成果如下：（1）提取出对风格形式的情感语言，并将其定义为感性语言。(2)导出了由感性语言控制的确定形状的形状参数。(3)设计了一个以感性语言为工具，通过改变造型参数来实现造型和造型修改的造型设计辅助系统。(4)对服装款式设计辅助系统进行了基本设计和详细设计，并进行了开发。(5)利用Lansei语言进行了基于高光线和曲率分布等工程参数的高质量曲面造型系统的概念设计。(6)完成了高质量曲面造型系统的基本设计和详细设计，并开发了该系统。

项目成果

Ohnishi, Masakazu: "Form modeling based on high light lines"Proc.of 2000 spring meeting of JSPE. 2 (2000)

Ohnishi, Masakazu：“基于高光线的形式建模”JSPE 2000 年春季会议记录。

太田学: "感性言語に基づく意匠設計支援のための基礎研究"2000年度精密工学会秋季大会学術講演会講演論文集. 264 (2000)

太田学：《基于情感语言的设计设计支持的基础研究》2000年日本精密工程学会秋季会议学术讲座论文集264（2000）。

大西正和,青山英樹: "ハイライト曲線に基づく形状モデリング"2000年度精密工学会春季大会学術講演会講演論文集. 2 (2000)

Masakazu Onishi、Hideki Aoyama：《基于高光曲线的形状建模》2000年精密工程学会春季学术会议论文集2（2000）。

Ohta, Manabu: "Basic study of supporting system based on Kansei Language for style design"Proc.of 2000 spring meeting of JSPE. 264 (2000)

大田学：“基于感性语言的风格设计支持系统的基础研究”JSPE 2000年春季会议论文集。

Hideki Aoyama,Yuichiro Nishizawa: "Construction of High Quality CAD Model from Rough Physical Model"Proceedings of the 10^<th> International Conference on Flexible Automation and Intelligent Manufacturing. 813-822 (2000)

青山秀树、西泽雄一郎：《从粗糙物理模型构建高质量CAD模型》第十届柔性自动化与智能制造国际会议论文集。