Ni/NiAl拡散対を利用したNi_3Al単結晶の創製
利用 Ni/NiAl 扩散偶制备 Ni_3Al 单晶
基本信息
- 批准号:11123229
- 负责人:
- 金额:$ 0.96万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Scientific Research on Priority Areas (A)
- 财政年份:1999
- 资助国家:日本
- 起止时间:1999 至 无数据
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
Ni/NiAlの拡散熱処理条件を詳細に制御してNi_3Al単結晶の最適な作製条件を確立するとともに、Ni_3Al中での相互拡散係数や固有拡散係数を決定した。得られた結果を以下に要約する。1.透過電子顕微鏡や方位像顕微鏡によりNi_3Al単結晶の生成が1373K以上の温度で明瞭に確認された。2.このNi_3Al相の成長速度はNi/Ni-38mol%Alの方がNi/Ni-45mol%Alより速くなり、Niに富んだNiAl相を用いる方が単結晶作製に有利であることが示された。3.濃度勾配より求めたNi_3Alの相互拡散係数はこれまでの報告値とよく一致した。4.Ni_3Al中のNiとAlの固有拡散係数は同程度であり、Alが拡散しにくいとする従来の考えとは異なり、α副格子空孔モデルやAnti-Structure Bridgeモデルを支持する結果となった。
Ni/NiAl dispersion conditions determine the number of inherent dispersion conditions in Ni_3Al, and determine the number of inherent dispersion conditions. The results show that the following requirements are important. 1. The temperature above 1373K is clearly confirmed by the electron micrograph azimuth image micrometer Ni _ 3Al crystal. two。 The relative growth rate of Ni _ 3Al phase, the growth rate of Ni/Ni-38mol%Al phase, the growth rate of Ni phase, and the growth rate of Ni phase, the phase growth rate of Ni _ NI phase, the phase growth rate of Ni _ NI phase and the phase growth rate of Ni _ NI phase, the phase growth rate of Ni _ NI phase, the phase growth rate of Ni _ NI phase and the phase growth rate of Nickel phase. 3. How many times do you want Ni _ 3Al to scatter each other? do you know how many reports are consistent? The number of inherent dispersion of Ni Al in 4.Ni_3Al is the same as that of Al. The results show that there are significant differences in the number of Anti-Structure Bridge holes in the same degree, and the results are in support of the results.
项目成果
期刊论文数量(10)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
Z. Horita: "Chemical composition analysis for interfaces by analytical electron microscopy"Proc. 9th Cimtec-World Forum. 71-82 (1999)
Z. Horita:“通过分析电子显微镜进行界面的化学成分分析”Proc。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
N. Komai: "Study of Ni/Ni-8mol%Ti Diffusion-couple"Acta Mater. 46. 4443-4451 (1998)
N.%20Komai:%20《研究%20of%20Ni/Ni-8mol%Ti%20扩散偶》Acta%20Mater.%2046.%204443-4451%20(1998)
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
Z. Horita: "Overview-Quantitactive X-ray microanalysis in Aualytical electron microscop*y"Mater. Trans. JIM. 39. 947-958 (1998)
Z. Horita:“概述 - 电子显微镜中的定量 X 射线微量分析*”Mater。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
S. Tanaka: "Application of S・factor method to Ti-Al-Cr System in Analytical Electron Microscopy"J. Electron Microscopy. 47. 9-15 (1998)
S. Tanaka:“S·因子法在分析电子显微镜中对 Ti-Al-Cr 系统的应用”J. 47. 9-15 (1998)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
K. Fujiwara: "Measurments of Intrinsic Diffusion Coefficients in Ni_3Al"Proc. Int. Conf. on Solid-Solid phase Transformation. 481-484 (1999)
K. Fujiwara:“Ni_3Al 中本征扩散系数的测量”Proc。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
堀田 善治其他文献
HPT加工によるバルクナノ結晶粒ZnTeの作製
HPT 工艺制备大块纳米晶 ZnTe
- DOI:
- 发表时间:
2015 - 期刊:
- 影响因子:0
- 作者:
生駒 嘉史;江尻 幸賢;堀田 善治;齊藤 勝彦;郭 其新 - 通讯作者:
郭 其新
Josephson接合に埋め込まれた量子ドットのスペクトル関数: 数値くりこみ群による研究
嵌入约瑟夫森结中的量子点的谱函数:使用数值重正化群的研究
- DOI:
- 发表时间:
2016 - 期刊:
- 影响因子:0
- 作者:
生駒 嘉史;江尻 幸賢;堀田 善治;齊藤 勝彦;郭 其新;小池章高,小栗章,田中洋一 - 通讯作者:
小池章高,小栗章,田中洋一
巨大ひずみ加工による高強度アルミニウム合金の開発
大应变加工高强度铝合金的开发
- DOI:
- 发表时间:
2022 - 期刊:
- 影响因子:0
- 作者:
苗 暉淋;堤 成一郎;三浦 拓也;川久保 拓海;森貞 好昭;藤井 英俊;堀田 善治 - 通讯作者:
堀田 善治
高圧下における溶体化処理を利用した時効硬化型アルミニウム合金の高強度化
利用高压固溶处理提高时效硬化铝合金的强度
- DOI:
- 发表时间:
2022 - 期刊:
- 影响因子:0
- 作者:
増田 高大;廣澤 渉一;堀田 善治; 新名 亨;入舩 徹男;肥後 祐司; 丹下 慶範;大石 泰生 - 通讯作者:
大石 泰生
堀田 善治的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('堀田 善治', 18)}}的其他基金
巨大ひずみ加工による水素貯蔵合金の開発
大应变加工储氢合金的研制
- 批准号:
10F00080 - 财政年份:2010
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for JSPS Fellows
巨大ひずみ加工を利用した超伝導特性の向上
利用大应变处理改善超导性能
- 批准号:
21656176 - 财政年份:2009
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Challenging Exploratory Research
Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects
含有超高密度晶格缺陷的先进材料的巨应变工艺
- 批准号:
18062006 - 财政年份:2006
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
分析電子顕微鏡を用いた固有拡散係数測定法の開発
开发使用分析电子显微镜的本征扩散系数测量方法
- 批准号:
09242232 - 财政年份:1997
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
分析電子顕微鏡による低温域拡散係数の測定
使用分析电子显微镜测量低温扩散系数
- 批准号:
04650602 - 财政年份:1992
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for General Scientific Research (C)
分析電子顕微鏡微小部分析(AEM-EDS)法の拡散係数測定への応用
分析电子显微镜(AEM-EDS)方法在扩散系数测量中的应用
- 批准号:
01750659 - 财政年份:1989
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
高比強度 Al-Li 合金の高温クリープ変形に関する研究
高比强度铝锂合金高温蠕变变形研究
- 批准号:
60750707 - 财政年份:1985
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
相似海外基金
Development of ternary Ni_3Al-alloy catalysts for hydrogen production
三元Ni_3铝合金制氢催化剂的研制
- 批准号:
19360321 - 财政年份:2007
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Development of Ni_3Al-based intermetallic foil catalysts
Ni_3Al基金属间箔催化剂的研制
- 批准号:
19560774 - 财政年份:2007
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
再結晶と析出の重畳効果によるNi_3Al基金属間化合物箔の複相ナノ構造制御
再结晶与析出叠加效应对Ni_3Al基金属间化合物箔多相纳米结构的控制
- 批准号:
18760536 - 财政年份:2006
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Young Scientists (B)
LASER WELDING OF Ni_3Al INTERMETALLIC COMPUNDS FOILS
Ni_3Al金属间化合物箔的激光焊接
- 批准号:
17360363 - 财政年份:2005
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
金属間化合物Ni_3Al冷間圧延箔の単結晶化に関する研究
金属间化合物Ni_3Al冷轧箔单晶研究
- 批准号:
15760546 - 财政年份:2003
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Young Scientists (B)
Fabrication of Intermetallic Compound, Ni_3Al Using Interfacial Reaction
利用界面反应制备金属间化合物Ni_3Al
- 批准号:
08455350 - 财政年份:1996
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
improvement of Strength and Ductility of Ni_3Al and Challenge to a High Temperature Structural Material
Ni_3Al强度和延展性的提高及对高温结构材料的挑战
- 批准号:
07555654 - 财政年份:1995
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Scientific Research (A)
Ni_3Alの高温延性および高温強度特性の改善
Ni_3Al高温塑性和高温强度性能的提高
- 批准号:
05223204 - 财政年份:1993
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
粒界性格分布の制御によるNi_3Alの延性改善
控制晶界特征分布提高Ni_3Al的延展性
- 批准号:
05855103 - 财政年份:1993
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
Development of Heat Resistant Ni_3Al Base Cermet Using Mechanical Alloying Process.
采用机械合金化工艺开发耐热Ni_3Al基金属陶瓷。
- 批准号:
05650684 - 财政年份:1993
- 资助金额:
$ 0.96万 - 项目类别:
Grant-in-Aid for General Scientific Research (C)