A Study on A Modeling Method for Life-Cycle Support of Manufacturing Ststems

制造系统全生命周期支持建模方法研究

• 批准号: 11650127
• 负责人: ONOSATO Masahiko
• 金额: $ 2.18万
• 依托单位: Osaka University
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Scientific Research (C)
• 财政年份: 1999
• 资助国家: 日本
• 起止时间: 1999 至 2000
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-11650127/
• 关键词: manufacturing system; life-cycle; modeling; virtual manufacturing system

This research project deals with the problem of efficient life-cycle support for manufacturing systems including design, implementation, planning and control, maintenance, improvement, re-construction, and disposal. The primary results of this project are summarized as follows.1) The technique of virtual manufacturing systems is the core part of the life-cycle support and presents the field of information sharing between different activities. It can integrate three aspects of system diversity : time, space, and applications.2) The research project shows the concept of active knowledge archive which enables to store manufacturing knowledge with rich information around knowledge. The implementation was examined by using VirtualWorks.3) The concept of life-cycle maintenance was proposed and the concrete method of it was presented. It requires manufacturing system designers to consider maintainability, safeness and health as well as productivity.The research project also indicates some problems to be solved for new manufacturing systems. They are1) Definition of standards for constructing virtual manufacturing system2) Systematic collection of manufacturing knowledge with situation descriptions3) Development of LCA methods for manufacturing systems

本研究项目研究制造系统的有效生命周期支持问题，包括设计、实施、计划和控制、维护、改进、重建和处置。1)虚拟制造系统技术是全生命周期支持的核心部分，体现了不同活动之间信息共享的领域。该研究项目提出了主动知识档案的概念，使制造知识能够存储丰富的知识周围信息。3)提出了全生命周期维护的概念，并给出了具体的实现方法。这就要求制造系统设计者在考虑可维护性、安全性、健康性和生产率的同时，也指出了新制造系统需要解决的一些问题。它们是1)构建虚拟制造系统的标准定义2)系统地收集制造知识和情境描述3)开发制造系统的生命周期评价方法

项目成果

小野里雅彦,尾崎優,仁田野雅秀,寺本孝司,岩田一明: "デジタルファクトリーと作業:人間と仮想生産システムのインタフェース"国際生産科学者会議 生産システム誌. 29. 271-275 (1999)

Masahiko Onozato、Yu Ozaki、Masahide Nitano、Takashi Teramoto、Kazuaki Iwata：“数字工厂和工作：人类与虚拟生产系统之间的接口”国际生产科学家会议生产系统杂志 29. 271-275 (1999)。

Onosato, M., Osaki, S., Nitano, M., Teramoto, K., and Iwata, K: "Working in a Digital Factory : Interface between Human and Virtual Manufacturing Systems"CIRP Journal of Manufacturing Systems. Vol.29 No.3. 271-275 (1999)

Onosato, M.、Osaki, S.、Nitano, M.、Teramoto, K. 和 Iwata, K：“在数字工厂中工作：人类与虚拟制造系统之间的接口”CIRP 制造系统杂志。

Onosato,M.,Osaki,S.,Nitano,M.,Teramoto,K.,and Iwata,K: "Working in a Digital Factory : Interface between Human and Virtual Manufacturing Systems"CIRP Journal of Manufacturing Systems. 29・3. 271-275 (1999)

Onosato, M.、Osaki, S.、Nitano, M.、Teramoto, K. 和 Iwata, K：“在数字工厂中工作：人类与虚拟制造系统之间的接口”CIRP 制造系统杂志 29・3。 271-275 (1999)