A Study on Multiple View Software Modeling for advanced

高级多视图软件建模研究

• 批准号: 11680364
• 负责人: HASHIMOTO Masaaki
• 金额: $ 2.3万
• 依托单位: Kyushu Institute of Technology
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Scientific Research (C)
• 财政年份: 1999
• 资助国家: 日本
• 起止时间: 1999 至 2001
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-11680364/
• 关键词: Software modeling; multiple view; GALS; Domain-specifric; Abstract structure of knowledge; Specification description language; Reference model; Systems generator; ソフトウェア工学; データ工学; ビュー; ドメイン依存; CAD; データ交換; 建築

In Japan, many enterprises compete intensively in the various industry sectors because of the global standardization. The CALS which supports all the phases of product life cycles is one of the most serious problems. Therefore, the CALS was experienced in the various industry sectors. The reporters also joined the experiment of architectural CALS. The experiment made clear the followings :(a) The old method of product data expression is applied.(b) The data is complicated since the data of all the phases is mixed. Therefore, the developments of information systems require more cost.This research has solved the above-mentioned problems by applying the multiple view software modeling as follows :(1) Single view modeling for individual phases applies an abstract structure of knowledge.(2) The multiple view modeling relates all the single view models to each other via the general object model which is a base of the above-mentioned abstraction.(3) An implementation method of the multiple view modeling has been proposed as a reference model of CAD systems generation.(4) A systems generator has been developed using the reference model, and applied to the experiment of architectural CALS.

在日本，由于全球标准化，许多企业在各个产业部门进行激烈竞争。支持产品生命周期各个阶段的CALS是其中最重要的问题之一。因此，CALS在各个行业部门都有经验。记者们也加入了建筑CALS的实验。实验表明：（a）采用了原有的产品数据表示方法. (b)由于所有阶段的数据是混合的，因此数据是复杂的。本研究应用多视图软件建模方法，解决了上述问题：（1）单视图建模采用知识的抽象结构，对各个阶段进行建模。(2)多视图建模通过作为上述抽象的基础的通用对象模型将所有单视图模型彼此关联。(3)提出了一种多视图建模的实现方法，作为CAD系统生成的参考模型。(4)利用该参考模型开发了一个系统生成器，并应用于建筑CALS实验。

项目成果

橋本正明 他: "建築施工プロセスのモデリング"2000年電子情報通信学会総合大会論文集. 情報・システム2. 365-365 (2000)

Masaaki Hashimoto 等人：“建筑施工过程建模”2000 年 IEICE 信息和系统大会记录 2. 365-365 (2000)。

Masaaki Hashimoto, 他: "A Case-Study-Based Discussion of Business Process Analysis and Modeling for Re-engineering Small and Medium-figed Enterprises"Proceedings of the 4th International Conference on Information Systems and Modeling. 111-118 (2001)

Masaaki Hashimoto 等人：“基于案例研究的中小企业再造业务流程分析和建模讨论”第四届国际信息系统和建模会议论文集（2001 年）。

Luckman EFERNDY Masaabi HASHIMOTO, 他: "A Reference Model of CAD System Generation from Various object Model-Based Spectication Description Languages Specific to individual Aomales"Ieice TKANSACTIONS on Information and Systems. E83-D4. 713-721 (2000)

Luckman EFERNDY Masaabi HASHIMOTO 等人：“基于各种基于对象模型的规范描述语言生成 CAD 系统的参考模型”，Ieice TKANSACTIONS on 信息和系统 (2000)。

橋本正明 他: "An Experience Report on an Implementation of Anchitektunal CALS"IDRT 2000年6月発表予定.

Masaaki Hashimoto 等人：“关于 Anchitektunal CALS 实施的经验报告”IDRT 计划于 2000 年 6 月出版。

Masaaki Hashimoto 他: "A Case-Study-Based Discussion of Business Process Analysis and Modeling for Re-EngineeringSmall and Mediwn-sized Enterpriss"Proceedings of the International Conterent of Infarmation Systems Moclelings. 111-118 (2001)

Masaaki Hashimoto 等人：“基于案例研究的中小型企业再造业务流程分析和建模讨论”国际信息系统会议论文集 111-118 (2001)。