FlushEco - a totally new approach to toilet flushing

FlushEco希望通过开发我们的专利厕所冲洗系统来提高英国和全球的厕所冲洗效率，该系统使用内部“冲洗容器”，旨在利用重力进行操作。市场上的许多冲洗装置依赖于垫圈或隔膜，这些可能会失败，从而使水浪费在马桶座便器上或通过低效的冲洗。这在很大程度上导致了英国和全球的水资源浪费。我们的创新容器不依赖于垫圈或隔膜，而是由一块塑料成型，因此不会因垫圈或隔膜磨损或故障而泄漏。我们的设计是一种“墙后”装置，可安装在墙壁、假面板和浴室家具中，与市场上其他“墙后”装置一致。冲洗水储存在冲洗容器中，远离水箱壁，减少水箱外部可能形成的冷凝水，从而对周围区域造成潮湿，霉菌和材料损坏。我们的设计易于安装，维护成本低，与类似的“墙后”装置相比，仅需约1/3的部件。该项目将使FlushEco能够将我们的专利概念验证设计开发成可行的工作原型，并考虑到大批量生产和低成本。

FlushEco looks to improve the efficiency of toilet flushing in the UK and globally by developing our Patented toilet flushing system which uses an internal 'Flush container' designed to operate using gravity. Many flush devices on the market rely on washers or diaphragms, these can fail allowing water to be wasted down the toilet pan or through inefficient flushing. This heavily contributes to the amount of water wasted in the UK and globally. Our innovative container does not rely on washers or diaphragms and is moulded out of one piece of plastic, so can't leak due to washer or diaphragm wear or failure.Our design is a 'Behind the wall' setup that can be installed behind walls, false panels and in bathroom furniture in-line with other 'Behind the wall' setups on the market. The flush water is stored in the Flush container away from the cistern wall, reducing condensation that can form on the outside of the cistern that causes damp, mould and material damage to the surrounding area. Our design will be easy to install, low maintenance and have approximately 1/3 of the components compared to similar 'Behind the wall' set ups.This project will allow FlushEco to develop our patented proof-of-concept design into a viable working prototype, designed with high-volume manufacture and low cost in mind.