3D printed microchemical devices and systems

3D打印微化学装置和系统

• 批准号: DP210102928
• 负责人: Prof Michael Breadmore
• 金额: $ 21.26万
• 依托单位: University of Tasmania
• 依托单位国家: 澳大利亚
• 项目类别: Discovery Projects
• 财政年份: 2021
• 资助国家: 澳大利亚
• 起止时间: 2021-01-01 至 2024-12-31
• 项目状态: 已结题
• 来源: https://dataportal.arc.gov.au/RGS/Web/Grants/DP210102928
• 关键词: 3D; printed; microchemical; devices; systems

This project aims to address the barriers faced by 3D printing in chemistry. 3D printing can create bespoke 3D structures within a fraction of time and cost compared to traditional fabrication. However, its scope in chemistry has been limited by the poor chemical robustness, biotoxicity and low resolution of the 3D printed components. Hence, this project will develop novel gold coating techniques and explore high-resolution 3D printing to overcome these challenges. The project should generate commercially significant products (analytical platforms), technology (gold coating) and patents. The developed systems and technologies will address Australian research challenges in advanced manufacturing and enable on-site environmental monitoring.

该项目旨在解决3D打印在化学领域面临的障碍。与传统制造相比，3D打印可以在很短的时间和成本内创建定制的3D结构。然而，其在化学领域的应用范围受到3D打印组件的化学稳定性差、生物毒性和低分辨率的限制。因此，该项目将开发新的黄金涂层技术，并探索高分辨率3D打印来克服这些挑战。该项目应产生具有商业意义的产品（分析平台）、技术（黄金涂层）和专利。开发的系统和技术将解决澳大利亚在先进制造领域的研究挑战，并实现现场环境监测。