Sub-micron X-ray Computed Tomography Facility at Durham University - non-equipment part

杜伦大学亚微米 X 射线计算机断层扫描设备 - 非设备部分

• 批准号: EP/K036084/1
• 负责人: Charles Augarde
• 金额: $ 1.6万
• 依托单位: Durham University
• 依托单位国家: 英国
• 项目类别: Research Grant
• 财政年份: 2013
• 资助国家: 英国
• 起止时间: 2013 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=EP%2FK036084%2F1
• 关键词: Sub; micron; ray; Computed; Tomography

Researchers from many areas of science and engineering need to investigate the internal structure of solid materials and artefacts; they might want to determine the proportions of different materials, the locations of voids, the presence of water, see structural fabrics or many other possibilities. Accurate non-destructive investigation of this nature has proved almost impossible until recently. However, with the advent of new X-ray scanning machines, both available at a reasonable cost and relatively easy to use, a new world of investigation is opening up. These machines are very similar to computed tomography (CT) scanners one finds in hospitals. However these machines are constructed to be particularly suitable for scanning of materials such as soils, concrete, rock and some metals. This proposal seeks funding to set up a new XRCT scanning facility for researchers in civil engineering, bioengineering, manufacturing, geology, archaeology and biological sciences. based at Durham University. The new facility will primarily serve groups working at Durham, Newcastle and Sheffield Universities. However it will be possible for other academics and industry to use the facility as well.

来自许多科学和工程领域的研究人员需要研究固体材料和人工制品的内部结构；他们可能想要确定不同材料的比例、空隙的位置、水的存在、结构织物或许多其他可能性。直到最近，对这种性质进行准确的非破坏性调查几乎是不可能的。然而，随着新型x射线扫描机的出现，既价格合理又相对容易使用，一个新的研究领域正在打开。这些机器非常类似于人们在医院里发现的计算机断层扫描（CT）扫描仪。然而，这些机器的构造是特别适合于扫描材料，如土壤，混凝土，岩石和一些金属。该提案寻求资助，为土木工程、生物工程、制造业、地质学、考古学和生物科学领域的研究人员建立一个新的XRCT扫描设施。他在杜伦大学工作。新设施将主要服务于在达勒姆、纽卡斯尔和谢菲尔德大学工作的团体。然而，其他学术界和工业界也有可能使用该设施。

项目成果

Realising the CO2 sequestration potential of steel and iron making slags

实现钢铁炉渣的二氧化碳封存潜力

• 发表时间: 2016
• 作者: Dobranski A

Taking the strain: Quantifying 3 phase microstructural evolution during flow using ultra fast X-ray tomography

应变：使用超快 X 射线断层扫描量化流动过程中的三相微观结构演化

• 发表时间: 2017
• 作者: Dobson KJ

The percolation threshold in magma: Insights from laboratory measurements, in situ synchrotron experiments and numerical simulations.

岩浆中的渗滤阈值：来自实验室测量、原位同步加速器实验和数值模拟的见解。

• 发表时间: 2017
• 作者: Colombier M. ,

Effect of Relative Density on Compressive Load Response of Crumpled Aluminium Foil Mesh

• DOI: 10.3390/ma12234018
• 发表时间: 2019-12
• 期刊: Materials
• 影响因子: 3.4
• 作者: D. Hughes;E. Amalu;Tannaz Pak;R. Kennedy

Diagenesis & reservoir quality of the middle Bakken Formation

成岩作用

• 发表时间: 2016
• 作者: Brodie Mark William