Application and development of Imaging and diagnostics for the real time analysis of metal based additive manufacturing.

用于金属增材制造实时分析的成像和诊断的应用和开发。

• 批准号: 2116629
• 金额: --
• 依托单位: University of Cambridge
• 依托单位国家: 英国
• 项目类别: Studentship
• 财政年份: 2018
• 资助国家: 英国
• 起止时间: 2018 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=studentship-2116629
• 关键词: Application; development; Imaging; diagnostics; real

Multi-beam additive manufacturing operates in a process regime distinctly different from the conventional single point keyhole regime. During the first phase of the project the aim will be to obtain greater understanding of the physical mechanisms (gas flow, sintering etc.) and heat transfer where lasers or operated in both parallel and serial manner. The advantages and disadvantages will be assessed in relation to build rate and density. During the remainder of the programme the project brief will be extended to determine if the tools generated for the assessment of the process (or alternative solutions) can be used for real time monitoring of the process or post process QA.

多束增材制造的工艺方式与传统的单点锁孔方式明显不同。在该项目的第一阶段，目标是更好地了解激光或以并行和串行方式运行的物理机制（气流、烧结等）和传热。将根据构建速率和密度来评估优点和缺点。在该计划的剩余时间内，项目简介将得到扩展，以确定为评估流程（或替代解决方案）而生成的工具是否可以用于实时监控流程或流程后质量保证。