Multi-FPGA prototyping platform for real-time simulation and control applications in power engineering

用于电力工程实时仿真和控制应用的多 FPGA 原型设计平台

• 批准号: 374725-2009
• 负责人: Dinavahi, Venkata
• 金额: $ 6.02万
• 依托单位: University of Alberta
• 依托单位国家: 加拿大
• 项目类别: Research Tools and Instruments - Category 1 (<$150,000)
• 财政年份: 2008
• 资助国家: 加拿大
• 起止时间: 2008-01-01 至 2009-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=411997
• 关键词: Multi; FPGA; prototyping; platform; real

Modern electrical power systems are large-scale systems with a high degree of complexity and nonlinearity. Fast switching power electronic apparatus are widely used for various applications at the generation, transmission, distribution, and utilization levels. The design and development of digital controllers and protection equipment for such applications is a complex process which involves repeated testing in an expensive facility. Currently, the only cost-effective method to perform such testing is real-time hardware-in-the-loop simulation, in which the device-under-test is physically interfaced with a real-time simulator that accurately models the power system with embedded power electronic apparatus.

现代电力系统是具有高度复杂性和非线性的大型系统。快速开关电力电子设备广泛应用于发电、输电、配电和利用等各个层面。用于此类应用的数字控制器和保护设备的设计和开发是一个复杂的过程，需要在昂贵的设施中进行反复测试。目前，进行此类测试的唯一经济有效的方法是实时硬件在环仿真，其中被测设备与实时模拟器物理接口，该模拟器精确地模拟了嵌入式电力电子设备的电力系统。