A feasibility study for transforming ISO shipping containers into liquid storage containers for WWTP's and WTP's

将 ISO 集装箱改造为污水处理厂和污水处理厂液体储存容器的可行性研究

• 批准号: 469126-2014
• 负责人: Kianoush, Reza
• 金额: $ 1.82万
• 依托单位: Ryerson University
• 依托单位国家: 加拿大
• 项目类别: Engage Grants Program
• 财政年份: 2014
• 资助国家: 加拿大
• 起止时间: 2014-01-01 至 2015-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=563292
• 关键词: feasibility; study; transforming; ISO; shipping

The objective of this study is to investigate the feasibility of transforming the standard ISO (International Standard Organization) shipping container into a containerized WWTP (Waste Water Treatment Plant) and WTP (Water Treatment Plant) unit. Containerized WWTP and WTP are commonly employed in remote communities, work camps and any facility without access to major municipal infrastructures. Despite the satisfactory performance, they are dealing with issues such as very high cost of manufacturing, limited capacity, transportation, accessibility and site preparations. An alternative idea is to employ the standard ISO shipping containers as WWTP and WTP. An ISO shipping container is a box shape steel structure specially designed for transporting goods and products. The standard container is 20ft long and has a cross section of approximately 8ft×8ft (height × width), internal volume of 32m3 and carries a maximum gross weight of 30×103kg. Compared to the current containerized WWTP products, ISO shipping containers offer many advantages such as significantly lower cost, accessibility and easy transportation, low site preparation costs and considerably higher capacity (due to vertical configuration).

本研究的目的是探讨将标准ISO（国际标准化组织）集装箱改造成集装箱化的污水处理厂和水处理厂单元的可行性。集装箱式污水处理厂和污水处理厂通常用于偏远社区，工作营地和任何无法进入主要市政基础设施的设施。尽管业绩令人满意，但它们正在处理诸如制造成本非常高、能力、运输、可达性和场地准备有限等问题。另一种想法是采用标准ISO集装箱作为WWTP和WTP。ISO集装箱是专门为运输货物和产品而设计的箱形钢结构。标准集装箱长20英尺，横截面约为8英尺× 8英尺（高×宽），内部容积为32立方米，最大毛重为30× 103公斤。与目前的集装箱式污水处理厂产品相比，ISO集装箱具有许多优势，例如成本显著降低，可达性和易于运输，场地准备成本低，容量显著提高（由于垂直配置）。