Dynamics of Atomic Stick-Slip Friction

原子粘滑摩擦动力学

• 批准号: RGPIN-2014-04748
• 负责人: Egberts, Philip
• 金额: $ 1.82万
• 依托单位: University of Calgary
• 依托单位国家: 加拿大
• 项目类别: Discovery Grants Program - Individual
• 财政年份: 2015
• 资助国家: 加拿大
• 起止时间: 2015-01-01 至 2016-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=587993
• 关键词: Dynamics; Atomic; Stick; Slip; Friction

The objective of this project is to gain further understanding of the dynamic aspects of frictional sliding at the atomic scale. In particular, this project will be focused on examining the structure of extremely small, nanoscale sliding contacts, characterizing the thermal and mechanical fluctuations of the contact under static and sliding conditions, and the effect thermal energy has on reducing friction in dry lubricated contacts. Examination of such fundamental concepts is crucial, despite the fact that the concept of friction is considered relatively simple. For example, although it is possible to easily measure friction and catalogue its effects, there currently exists no method of predicting the friction behaviour that will occur when two materials are brought into contact and begin to slide against each other. While our existing empirical friction laws have been widely exploited to date, innovation in the field of tribology, or the field concerned with understanding friction, is critical for improved environmental performance of mechanical systems, enhanced durability of these systems, and technological innovation of micro-/nano-electromechanical (M/NEMS). Given the goal of producing machines that are extremely energy efficient, long-lasting, and have low maintenance needs, an improved understanding of friction, with a specific emphasis of reducing the problem to physically predictive values and theories, is required. Nanotechnology and nanoscience are often thought of enabling these goals, as the complex problem of friction can be reduced in complexity to one that can be experimentally measured as well as completely re-created within a computer simulation. In this research program, atomic force microscopy (AFM) will be used to examine friction between small, nanometre-sized tips sliding on a surface of atomically flat solid lubricants. AFM will be used in this study because it is able to measure forces sufficiently small to detect single chemical bonds breaking events, as well as laterally slide the tip along the surface by atomic distances. One issue with measuring friction with an AFM is that typical sliding speeds that can be achieved are on the order of 100 nm/s while typical machines operate at m/s sliding speeds. Measures will be taken to correct this deficiency in experiments. Furthermore, the influence of mechanical vibrations on reducing friction will be examined and their contributions to velocity dependent friction will be analyzed. This fundamental research represents the groundwork for reaching predictive models of friction, and will have far reaching impact on science and technology both in research institutions and industry.

这个项目的目的是获得在原子尺度上摩擦滑动的动力学方面的进一步了解。 特别是，该项目将重点研究极小的纳米级滑动接触的结构，表征静态和滑动条件下接触的热和机械波动，以及热能对减少干润滑接触摩擦的影响。 尽管摩擦的概念被认为是相对简单的，但对这些基本概念的考察是至关重要的。 例如，尽管可以容易地测量摩擦并将其效果分类，但目前还没有预测当两种材料接触并开始彼此相对滑动时将发生的摩擦行为的方法。 虽然我们现有的经验摩擦定律已被广泛利用，到目前为止，摩擦学领域的创新，或与理解摩擦有关的领域，是改善机械系统的环境性能，提高这些系统的耐用性，和微/纳米机电（M/NEMS）的技术创新的关键。 考虑到生产具有极高能效、持久耐用和低维护需求的机器的目标，需要提高对摩擦的理解，特别强调将问题减少到物理预测值和理论。 纳米技术和纳米科学通常被认为能够实现这些目标，因为摩擦的复杂问题可以降低到可以通过实验测量的复杂程度，并且可以在计算机模拟中完全重新创建。 在这项研究计划中，原子力显微镜（AFM）将被用来检查小，纳米尺寸的尖端在原子平面固体润滑剂表面上滑动之间的摩擦。 AFM将用于本研究，因为它能够测量足够小的力，以检测单个化学键断裂事件，以及沿表面沿着原子距离横向滑动尖端。 用AFM测量摩擦力的一个问题是，可以实现的典型滑动速度大约为100 nm/s，而典型的机器以m/s的滑动速度操作。 将采取措施在实验中纠正这一缺陷。 此外，机械振动对减少摩擦的影响将被检查，并将分析它们对速度相关摩擦的贡献。 这一基础研究代表了获得摩擦预测模型的基础，并将对研究机构和工业界的科学技术产生深远的影响。