Development, manufacturing, characterisation and modelling of lightweight structures prepared by selective laser melting

该项目的目标是通过获取和科学开发L激光-粉末床融合系统来加强轻量化设计领域的研究，该系统用于粉末床中金属结构的近净成形制造。在现有基础设施中嵌入这一设施可以扩大研究领域，并为后续项目提供更多机会。因此，现有的微观组织分析和力学测试基础设施可以在科学项目的框架内得到更好的利用。该项目旨在开发和附加制造基于AlSi10 Mg铝合金的刚度和强度优化的网格板结构。重点是晶格拓扑，它可以实现高比宏观刚性以及细胞壁的屈曲稳定性和基本应力类型的拉伸、压缩和剪切的特定强度。为此，希望具有壁厚变化尽可能小的0.2至0.3 mm的薄壁。用CT和SEM对生成的晶格板结构进行了分析。为了对这些结构进行力学研究，除了通常的压缩试验外，还计划进行循环剪切试验，以及专门开发的纯剪切和均匀剪切载荷的剪切场试验设备。基于L-PBF系统的研究活动将在轻量化设计能力中心进行，将结构和建模能力、材料能力和设计和制造能力捆绑在一起。可以使用关于蜂窝结构和夹层结构的现有技术，从而可以以更可重复性和力流导向的方式制造格子板结构。在金属基础上增加制造轻质结构和部件的可能性，是兰德休特应用科学大学轻量化设计研究领域持续进一步发展的重要先决条件。在项目期间，该设备将提供给该大学的其他研究领域进行科学活动。

The objective of the project is to strengthen the research area of lightweight design by acquiring and scientifically developing an L-PBF (Laser-Powder Bed Fusion) system for the near-net-shape manufacturing of metallic structures in powder beds. The embedding of such a facility into the existing infrastructure enables the expansion of the research area and provides additional opportunities for follow-up projects. Consequently, the existing infrastructure for the analysis of the microstructure and mechanical testing can be better utilised within the framework of scientific projects.The project aims on the development and additive manufacturing of stiffness- and strength-optimized lattice plate structures based on the Al-alloy AlSi10Mg. The focus is on lattice topologies that can achieve high specific macroscopic stiffnesses as well as buckling stability of the cell walls and specific strengths for the basic stress types of tension, compression and shear. For this purpose, a thin cell wall thickness of 0.2 to 0.3 mm with as little wall thickness variation as possible is aspired. The analysis of the generated lattice plate structures is performed by CT and SEM. For the mechanical investigations on these structures, cyclic shear tests with a specially developed shear field test facility for pure and homogeneous shear loads are planned in addition to the usual compression tests. The research activities on the basis of the L-PBF system will be carried out at the Competence Center of Lightweight Design (LLK) by bundling the competences from structural and modeling competence, materials competence and design and manufacturing competence. Existing know-how on cellular structures and sandwich structures can be used, whereby lattice plate structures can be produced in a much more reproducible and force-flow-oriented manner. The possibility of additive manufacturing of lightweight structures and components on a metallic basis represents an important prerequisite for the consistent further development of the research area of lightweight design at the Landshut University of Applied Sciences. The device will be made available to other research areas at the university for their scientific activities during the project period.