SPP 1712: Intrinsic Hybridcomposites for Lightweight Construction Structures - Basics of Manufacturing, Characterisation and Mechanical Design

SPP 1712：用于轻质建筑结构的本征混合复合材料 - 制造、表征和机械设计基础知识

• 批准号: 237091934
• 金额: --
• 依托单位: Institut für Produktionstechnik (WBK)
• 依托单位国家: 德国
• 项目类别: Priority Programmes
• 财政年份: 2014
• 资助国家: 德国
• 起止时间: 2013-12-31 至 2020-12-31
• 项目状态: 已结题
• 来源: https://gepris.dfg.de/gepris/projekt/237091934?language=en
• 关键词: SPP; 1712; Intrinsic; Hybridcomposites; Lightweight

Nowadays, the use of lightweight construction structures offers the opportunity to significantly reduce weight. In designing these lightweight construction structures, a wide range of requirements have to be considered depending on the type of application. The complete substitution of a material in order to use the full potential of the lightweight construction does not always lead to the desired result. Thus, the ideal overall structure consists of a hybrid material combination, the so-called multi-material design. Consequently, the approach of hybridising structural components is becoming increasingly prominent and can be performed basically by applying two different methods. The joining of hybrid composites by post moulding assembly, such as adhesive bonding or screwing, has already become a well-established approach.

如今，轻质结构的使用提供了显著减轻重量的机会。在设计这些轻质结构时，必须根据应用类型考虑各种要求。为了充分发挥轻质结构的潜力而完全替代材料并不总是能达到预期的效果。因此，理想的整体结构由混合材料组合组成，即所谓的多材料设计。因此，杂交结构组件的方法变得越来越突出，并且基本上可以通过应用两种不同的方法来执行。混杂复合材料的连接，通过后成型组装，如粘合剂粘接或螺纹连接，已经成为一种行之有效的方法。

项目成果

Predictive quality control of hybrid metal-CFRP components using information fusion

• DOI: 10.1007/s11740-018-0816-1
• 发表时间: 2018-04-01
• 期刊: PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT
• 影响因子: 1.7
• 作者: Berger, Dietrich;Zaiss, Marielouise;Stommel, Markus
• 通讯作者: Stommel, Markus

Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies

用于轻质结构的本征混合复合材料：模具技术

• DOI: 10.4028/www.scientific.net/amr.1140.247
• 期刊: Advanced Materials Research
• 作者: Wang Z;Riemer M;Koch SF;Barfuss D;Grützner R;Augenthaler F
• 通讯作者: Augenthaler F

Failure behaviour of metal inserts embedded in CFRP subsequent to thermal, mechanical and cyclic pre-damage

• DOI: 10.1016/j.compstruct.2020.111877
• 发表时间: 2020-03
• 期刊: Composite Structures
• 影响因子: 6.3
• 作者: M. Muth;F. Pottmeyer;K. Weidenmann

Smart cure cycles for fiber metal laminates using embedded fiber Bragg grating sensors

• DOI: 10.1016/j.compstruct.2019.01.079
• 发表时间: 2019-04-01
• 期刊: COMPOSITE STRUCTURES
• 影响因子: 6.3
• 作者: Prussak, Robert;Stefaniak, Daniel;Sinapius, Michael
• 通讯作者: Sinapius, Michael

Experimental and numerical study of the influence of integrated load transmission elements on filling behavior in resin transfer molding

集成负载传输元件对树脂传递模塑填充行为影响的实验和数值研究

• DOI: 10.1016/j.compstruct.2018.05.021
• 发表时间: 2018
• 期刊: Composite Structures
• 影响因子: 6.3
• 作者: Magagnato D;Seuffert J;Bernath A;Kärger L;Henning F
• 通讯作者: Henning F