High-resolution Scanning Electron Microscope with EDX

带有EDX的扫描电子显微镜是一种分析方法，如今在固态化学和材料开发的许多领域中不可或缺。在任命Malte Behrens教授博士到基尔大学（CAU）无机化学研究所的过程中，因此正在申请一台带有EDX检测器的扫描电子显微镜，以取代该研究所25年前的设备，该设备已不再是最先进的设备，并且由于无法修复的缺陷，最近仅能提供具有微米范围内的分辨率的图像。这给整个研究所造成了一个必须填补的空白。该设备将主要由主申请人Malte Behrens教授的工作组使用，但也由无机化学的同事使用，并将以服务模式提供给我们大学的所有其他成员。这对于CAU的纳米和界面科学尤其重要，这些科学被捆绑在大学范围内的研究重点KiNSIS（基尔纳米表面和界面科学）中。计划中的调查，特别是纳米材料的表征，需要采购一台配备有场发射器和镜头内检测器的高分辨率仪器，这是该领域的最新技术。为了通过分析材料对比度来表征样品的均匀性，仪器还必须具有强大的BSE检测器。此外，采购STEM检测器也是必要的，因为这允许大量的研究，例如对孔隙结构的研究，否则必须使用透射电子显微镜进行，这要复杂得多，而且可用性非常有限。此外，采购灵敏的EDX检测器对于计划的广泛定性和定量分析，特别是纳米颗粒的定性和定量分析是必要的。该设备还必须允许在更高的压力下进行测量（可变压力模式），以便能够详细研究电绝缘样品。最后，为了能够检测对空气敏感的样品，如活化后或催化试验后生产的催化剂，以及电池材料，需要采购惰性转移系统。这里申请的设备配置大大扩展了研究所，KiNSIS以及整个大学的实验可能性，对于计划的研究至关重要，特别是在多相催化领域，而且在申请中详细描述的所有其他项目中。

Scanning electron microscopy with EDX is an analytical method that is nowadays indispensable in many areas of solid state chemistry and material development. In the course of the appointment of Prof. Dr. Malte Behrens to the Institute of Inorganic Chemistry at Kiel University (CAU), an application is therefore being made for a scanning electron microscope with EDX detector to replace a 25-year-old device at the institute that is no longer state of the art in any way and, due to an irreparable defect, has recently only been able to provide images with a resolution in the micrometer range. This has created a gap for the entire institute that must be filled. This device will be used mainly by the working group of the main applicant Prof. Dr. Malte Behrens, but also by the colleagues of the Inorganic Chemistry and will be available in the service mode to all other members of our university. This is especially relevant for the nano and interface sciences at CAU, which are bundled in the university-wide research focus KiNSIS (Kiel Nano Surface and Interface Science). The planned investigations, especially the characterization of nanomaterials, require the procurement of a high-resolution instrument equipped with a field emitter as well as an in-lens detector, which is state of the art in this field. For the characterization of the samples with respect to their homogeneity by analyzing the material contrast, the instrument must also have a powerful BSE detector. In addition, the procurement of a STEM detector is also necessary, as this allows a large number of investigations, for example on the pore structure, which otherwise had to be carried out using transmission electron microscopy, which is much more complex and has very limited availability. In addition, the procurement of a sensitive EDX detector is necessary for the planned extensive qualitative and quantitative analyses, especially of nanoparticles. The device must also allow measurements at higher pressures (variable pressure mode) in order to be able to investigate electrically insulating samples in detail. Finally, the procurement of an inert transfer system is necessary in order to be able to examine air-sensitive samples, such as catalysts produced after activation or after catalytic tests, but also battery materials. The equipment configuration applied for here considerably expands the experimental possibilities at the institute, within KiNSIS as well as at the entire university and is essential for the planned investigations, especially in the field of heterogeneous catalysis, but also in all other projects described in detail in the application.