Electronic Bistable Recording Media for Scanning Multiprobe based Ultrahigh-Density Data Storage

用于扫描多探头的超高密度数据存储的电子双稳态记录介质

• 批准号: 151226304
• 负责人: Dr. Rüdiger Berger
• 金额: --
• 依托单位: Max-Planck-Institut für Polymerforschung
• 依托单位国家: 德国
• 项目类别: Research Grants
• 财政年份: 2009
• 资助国家: 德国
• 起止时间: 2008-12-31 至 2013-12-31
• 项目状态: 已结题
• 来源: https://gepris.dfg.de/gepris/projekt/151226304?language=en
• 关键词: Electronic; Bistable; Recording; Media; Scanning

Our goal is to develop bistable organic conductive media as storage media for a micro-fabricated scanning device to achieve ultra-high density data recording. New concepts are required for the fabrication and mechanical stabilisation of the storage media to enable applications in the field of nanoelectronics. In particular, the interface of the storage media should mechanically resist copious scanning (1000 Goals cycles) with a scanning probe tip to avoid degradation of the soft organic conductive media. The media should be rewritable using voltage pulses maximal 5 V in amplitude and maximal 1 ps duration. A device based on all MEMS will be developed that writes and reads data electrically beyond an areal density of 1 Tbit/inch2. Join Japanese and German research effort to develop new recording media.

我们的目标是开发有机导电介质作为微加工扫描设备的存储介质，以实现超高密度的数据记录。需要新的概念用于存储介质的制造和机械稳定，以实现纳米电子学领域中的应用。特别地，存储介质的界面应当机械地抵抗扫描探针尖端的大量扫描（1000个Goals周期），以避免软有机导电介质的劣化。应使用最大幅度为5 V、最大持续时间为1 ps的电压脉冲对介质进行振荡。将开发一种基于所有MEMS的器件，其电写入和读取数据的面密度超过1 Tbit/inch2。加入日本和德国的研究工作，开发新的记录媒体。

项目成果

Thermal properties of nanocapsules measured by scanning force microscopy methods

通过扫描力显微镜方法测量纳米胶囊的热性能

• DOI: 10.1016/j.mee.2012.03.011
• 发表时间: 2012
• 期刊: Microelectronic Engineering
• 影响因子: 2.3
• 作者: Tassilo Kaule;Anika Hamberger;Yi Zhang;Katharina Landfester;Hans-Jürgen Butt;Rüdiger Berger
• 通讯作者: Rüdiger Berger

Effective Young's Modulus Measurement of Thin Film Using Micromechanical Cantilever Sensors

使用微机械悬臂梁传感器有效测量薄膜杨氏模量

• DOI: 10.7567/jjap.52.110111
• 发表时间: 2013
• 期刊: Japanese Journal of Applied Physics
• 影响因子: 1.5
• 作者: Akiko N. Itakura;Masaya Toda;Koji Miyake;Renate Förch;Rüdiger Berger
• 通讯作者: Rüdiger Berger

Nanoscale thermomechanics of wear-resilient polymeric bilayer systems.

耐磨聚合物双层系统的纳米级热力学

• DOI: 10.1021/nn305047m
• 发表时间: 2013
• 期刊: ACS nano
• 影响因子: 17.1
• 作者: Tassilo Kaule;Yi Zhang;Sebastian Emmerling;Sascha Pihan;Renate Förch;Jochen Gutmann;Hans- Jürgen Butt;Rüdiger Berger;Urs Dürig;Armin Knoll
• 通讯作者: Armin Knoll

Fabrication of CNT-carbon composite microstructures using Si micromolding and pyrolysis

• DOI: 10.1007/s00542-013-1771-6
• 发表时间: 2014-02
• 期刊: Microsystem Technologies
• 作者: Liangliang He;M. Toda;Y. Kawai;H. Miyashita;M. Omori;T. Hashida;R. Berger;T. Ono