Collaborative Research: Solid-Liquid Interactions during Transient Liquid Phase Bonding

合作研究：瞬态液相键合过程中的固液相互作用

• 批准号: 0758659
• 负责人: Thomas Eagar
• 金额: --
• 依托单位: Massachusetts Institute of Technology
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 2008
• 资助国家: 美国
• 起止时间: 2008-05-15 至 2010-03-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=0758659&HistoricalAwards=false
• 关键词: Collaborative; Research; Solid; Liquid; Interactions

The combination of advanced thermodynamic and phase-field models, coupled with experiments will allow the understanding of solid/liquid interactions during Transient Liquid Phase (TLP) bonding. Better understanding of the solid/liquid interfacial phenomena is expected to make TLP bonding viable and will provide an environmentally-friendly alternative for electronic soldering. This research will study new approaches to control interfacial interactions to reduce joint width, shorten the bonding time, and improve the TLP joint characteristics. These include improving the compositional wetting at low temperatures through the de-stabilization of non-wettable oxide layers and maintaining a planar solid/liquid interface by applying transient diffusion barrier layers. The precipitation of Intermetallic Compounds will be addressed through processing parameters and diffusion barriers. The explored phenomena apply also to solidification, liquid phase sintering and other capillary-driven joining processes.The successful attainment of the objectives of this proposal will contribute to the development of better, environmentally-friendly electronic manufacturing techniques. Lead-containing alloys are extensively used as soldering materials for electronics. Unfortunately, poor recyclability makes electronic waste a major source for soil/water lead contamination. There is thus a strong driving force for the utilization of more environmentally-friendly alternatives. Despite considerable progress, most Pb-free solders require higher bonding temperatures, resulting in increased residual thermal stresses that reduce interconnect reliability. It is expected that understanding gained from this study will contribute to the ultimate phase-out of hazardous, lead-containing microelectronics components.

先进的热力学和相场模型的结合，再加上实验将允许瞬态液相（TLP）键合过程中的固/液相互作用的理解。 对固/液界面现象的更好理解有望使TLP键合可行，并将为电子焊接提供一种环境友好的替代方案。 本研究将探讨新的方法来控制界面相互作用，以减少接头宽度，缩短连接时间，并改善TLP接头的特性。 这些措施包括通过非氧化物层的去稳定化来改善低温下的成分润湿，以及通过施加瞬态扩散阻挡层来保持平面的固/液界面。 金属间化合物的析出将通过工艺参数和扩散障碍来解决。 所探索的现象也适用于凝固、液相烧结和其他毛细管驱动的连接过程。本提案目标的成功实现将有助于开发更好的、环境友好的电子制造技术。 含铅合金广泛用作电子产品的焊接材料。 不幸的是，可回收性差使电子废物成为土壤/水铅污染的主要来源。 因此，使用更环保的替代品具有强大的推动力。 尽管取得了相当大的进展，但大多数无铅焊料需要更高的键合温度，导致残余热应力增加，从而降低互连可靠性。 预计从这项研究中获得的理解将有助于最终淘汰危险的含铅微电子部件。