DMREF/Collaborative Research: Design of Multifunctional Catalytic Interfaces from First Principles

DMREF/合作研究：从第一原理设计多功能催化界面

• 批准号: 1437219
• 负责人: Chao Wang
• 金额: $ 24万
• 依托单位: Johns Hopkins University
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 2014
• 资助国家: 美国
• 起止时间: 2014-09-15 至 2019-08-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=1437219&HistoricalAwards=false
• 关键词: DMREF; Collaborative; Research; Design; Multifunctional

Abstract Title: DMREF: Collaborative Research:Design of next-generation catalysts through predictive modeling and atomic-scale experimentsCatalysts are the materials that allow the production of critical substances that make modern life possible. Catalytic technologies make essential contributions to many sectors of the US economy, ranging from petrochemicals processing to pollution abatement in automobiles, and many products that are taken for granted in contemporary society would not exist without these crucial processes. Traditional strategies for the discovery of new heterogeneous catalysts have relied heavily on chemical intuition and experience accumulated over many years of industrial practice, but to develop the next generation of catalytic materials, these strategies will be inadequate. The collaborative team of Profs. Jeffrey Greeley, Volkan Ortalan, and Fabio Ribeiro of Purdue University, and Chao Wang of Johns Hopkins University, have been awarded a grant under the National Science Foundation Designing Materials to Revolutionize and Engineer our Future (DMREF) initiative to develop a new strategy. The team proposes to make accurate predictions from a combination of experiments with atomic-level resolution and modeling using large-scale computing. Such predictive techniques have been explored for simple classes of catalytic materials, such as highly ordered metal or oxide surfaces. However, a much broader space of potentially exciting catalysts can be accessed by exploring so-called "multifunctional" materials, which offer complex interfaces between metals and oxides. The researchers will combine unparalleled atomic-scale experimental characterization, synthesis, and reactivity measurements to both inform the computational models and test predicted catalysts to emerge from the computational analysis. The proposed program will both lay the fundamental groundwork for accelerated identification of breakthrough catalytic materials, in general, and identify practical new catalysts for reactions with CO, CO2, and H2 as feedstocks, in particular.Single component heterogeneous catalysts are constrained by inherent limitations in catalytic rates, as exemplified by the well-known maxima in volcano plots that have been observed for many catalytic chemistries. The limitations can, in turn, be traced to an extensive series of fundamental correlations that exist between the energetics of elementary steps and species on the sites in question. Multifunctional catalytic structures, such as the interfaces that exist between thin oxide films and metal nanoparticles, provide a potential means of overcoming these limitations and identifying entirely new classes of catalysts. Developing a unified design framework for such multifunctional structures will require a combination of first principles molecular modeling techniques, advanced methods to synthesize and characterize the structure of catalysts at the atomic scale, and highly accurate measurements of reaction rates on the resulting materials. The project team will focus on model reactions, relevant to hydrogen production and methanol synthesis, which can be promoted at multifunctional interfaces. The team will develop new molecular modeling strategies, relying primarily on ab-initio methods, to rapidly evaluate the catalytic properties of many combinations of metal/oxide interfaces for the reactions of interest. Promising candidates to emerge from these computational screening studies will then be synthesized using techniques that permit control of the catalyst structure at the atomic level. The catalytic and structural properties of these catalysts will be verified experimentally at atomic resolution, and the resulting information will be used to improve the predictive models and to further refine the candidate materials. The end goal is a method of broad applicability that can be used to design breakthrough multifunctional catalytic materials for a variety of reactions of scientific and economic importance.

摘要标题：DMREF：合作研究：通过预测建模和原子级实验设计下一代催化剂催化剂是生产使现代生活成为可能的关键物质的材料。 催化技术为美国经济的许多部门做出了重要贡献，从石油化工加工到汽车污染减排，如果没有这些关键工艺，许多在当代社会中被视为理所当然的产品就不会存在。 发现新型多相催化剂的传统策略严重依赖于化学直觉和多年工业实践积累的经验，但要开发下一代催化材料，这些策略将是不够的。教授的合作团队。普渡大学的Jeffrey格里利、Volkan Ortalan和Fabio Ribeiro以及约翰霍普金斯大学的Chao Wang获得了美国国家科学基金会设计材料以革命和工程我们的未来（DMREF）计划的资助，以开发一种新的战略。该团队建议通过结合原子级分辨率的实验和使用大规模计算的建模来做出准确的预测。 这种预测技术已经被探索用于简单类别的催化材料，例如高度有序的金属或氧化物表面。 然而，通过探索所谓的“多功能”材料，可以获得更广阔的潜在令人兴奋的催化剂空间，这些材料在金属和氧化物之间提供复杂的界面。研究人员将结合联合收割机无与伦比的原子级实验表征，合成和反应性测量，以通知计算模型和测试预测的催化剂从计算分析中出现。拟议的计划将奠定基础，加速识别突破性催化材料，在一般情况下，并确定实用的新催化剂与CO，CO2和H2作为原料的反应，特别是。单组分非均相催化剂的催化速率的固有局限性的约束，作为例证，众所周知的最大火山图，已观察到许多催化化学。 反过来，这些局限性可以追溯到一系列广泛的基本相关性，这些相关性存在于基本步骤的能量学和所讨论的地点上的物种之间。 多功能催化结构，如薄氧化物膜和金属纳米颗粒之间存在的界面，提供了克服这些限制和识别全新类型的催化剂的潜在手段。 为这种多功能结构开发统一的设计框架将需要结合第一原理分子建模技术，在原子尺度上合成和表征催化剂结构的先进方法，以及对所得材料反应速率的高度精确测量。 该项目小组将侧重于与制氢和甲醇合成有关的模型反应，这些反应可以在多功能界面上得到促进。 该团队将开发新的分子建模策略，主要依靠从头算方法，以快速评估金属/氧化物界面的许多组合对感兴趣反应的催化性能。 从这些计算筛选研究中出现的有希望的候选物将使用允许在原子水平上控制催化剂结构的技术来合成。 这些催化剂的催化和结构特性将在原子分辨率下进行实验验证，所得信息将用于改进预测模型并进一步改进候选材料。 最终目标是一种具有广泛适用性的方法，可用于为具有科学和经济重要性的各种反应设计突破性的多功能催化材料。

项目成果

Catalytic Dephosphorylation Using Ceria Nanocrystals

• DOI: 10.1021/acscatal.6b03472
• 发表时间: 2017-03-01
• 期刊: ACS CATALYSIS
• 影响因子: 12.9
• 作者: Manto, Michael J.;Xie, Pengfei;Wang, Chao
• 通讯作者: Wang, Chao

Recovery of Inorganic Phosphorus Using Copper-Substituted ZSM-5

• DOI: 10.1021/acssuschemeng.7b01127
• 发表时间: 2017-06
• 期刊: ACS Sustainable Chemistry & Engineering
• 影响因子: 8.4
• 作者: Michael J. Manto;Pengfei Xie;Michael A. Keller;Wilhelm E. Liano;Tiancheng Pu;Chao Wang