Flexible flapping surfaces for water collection and condensation
Flexible flapping surfaces for water collection and condensation
批准号:
1603737
负责人:
Melanie Derby
金额:
$31.37万
依托单位:
依托单位国家:
美国
项目类别:
Standard Grant
财政年份:
2016
资助国家:
美国
项目状态:
已结题
起止时间:
2016-07-01 至 2021-06-30
中文摘要
1603737德比电力生产是一个非常耗水的过程,在美国,每生产一千瓦时的电力需要超过10加仑的水。发电厂冷却塔是一个很有前途的水收集领域,因为排污和蒸发的水可以被回收并用于能源生产、工业或农业。薄的、拍打着的聚合物膜/网是一种潜在的变革性过程,它将减少来自空气的热阻、通过聚合物的传导和冷凝,从而增加总脱水率。从初步发现,液滴在全氟烷氧基膜上振荡,以14赫兹的拍打从拍打表面喷射出来。在拍动表面,液滴平均偏离直径为0.985 mm,而在静止表面,液滴偏离直径为3.27 mm。拍打使液滴清除率增加了两个数量级,估计收水量增加了204%。估计瓣的能量为17W/m2,这种能量可以通过自拍法减少或消除。这项研究将研究拍打对用于集水的柔性聚合物薄膜的影响。数值模拟将确定激发水滴所需的加速度,并了解扑动对水收集的影响。实验验证将在环境室中的拍动薄膜/网格上进行,条件类似于冷却塔羽流。此外,还将利用狼溪发电站和杰弗里能源中心的水样进行实验,以确定恢复的水质,并将考虑第一次冲厕和随后的水样,以确定水质随时间的变化。水质评估的重点是盐度、阳离子和阴离子、营养物质和细菌。回收的水将与农业生产的灌溉标准以及发电厂和工业的要求进行比较。这项拟议的工作将增加关于液滴在柔性拍打表面上运动的基础知识。数值模拟将产生液滴平移或从表面弹出所需的拍打频率和幅度。液滴随时间的增长将通过撞击液滴和冷凝液滴的高速流动可视化来确定。将在301K和80%相对湿度下研究冷凝器表面的扑动,类似于冷却塔羽流的情况。除了水的收集率外,还将比较拍动和静止表面的液滴成核、合并和偏离,从而更好地了解振荡表面上的液滴动力学。已经确定了几种机制,可以解释液滴在拍打表面上的优越运动:表面张力、空气滞留和软质聚合物表面接触线的改变。将进行数值模拟和实验验证,以确定这些拟议机制对水收集的相对影响。将对恢复的水质进行评估,并确定可能的工业和农业用途。研究目标是:1.了解拍打频率(1-100赫兹)和振幅对液滴合并和从表面喷射的影响。蝴蝶、昆虫和旗帜在这个频率范围内飘动。2.模拟液滴在柔软表面上的行为,包括聚结、重力、加速度、表面张力和表面能对液滴形成和运动的影响。3.在类似冷却塔羽流的受控环境中,确定扑动对液滴清扫和水收集的影响。4.评估发电厂和农业应用的回收水质量。此外,PIs和学生将为初中和高中女孩创建一个工程推广模块,每年通过KAWSE计划接触到100名女孩。女孩们将创作喷枪T恤设计。使用高速视频,女孩们将确定平均油漆液滴大小,并评估油漆液滴在拍打过程中行为如何变化,类似于收集水分的拍打薄膜。该项目与节水和日常生活的相关性将使女孩们感兴趣,并激励她们从事STEM职业。该单元的简化版本将每年在Aggieville Mini Maker Fire上进行,并将使当地社区的儿童参与进来。
英文摘要
1603737DerbyElectrical power production is an extremely water intensive process, requiring over ten gallons of water to produce each kWh of electricity in the U.S. Power plant cooling towers represent a promising area for water harvesting, as blowdown and evaporated water could be recovered and used for energy production, industry, or agriculture. Thin, flapping polymer films/meshes are a potentially transformative process which would reduce thermal resistances from air, conduction through the polymer, and condensation, thereby increasing total water removal rates.From preliminary findings, droplets oscillated on a perfluoroalkoxy film, flapping at 14 Hz were ejected from the flapping surface. Average droplet departure diameters were 0.985 mm on flapping surfaces, compared to 3.27 mm on stationary surfaces. Flapping increased droplet removal rates by two orders of magnitude and estimated water collection volume by 204 %. Estimated energy to flap was 17 W/m2, and this could be reduced or eliminated by self-flapping. This research will investigate the effects of flapping on flexible polymer films for water harvesting. Numerical simulations will determine accelerations required to motivate droplets, and understand the impact of flapping on water harvesting. Experimental validation will be conducted on flapping films/meshes in an environmental chamber, with conditions similar to a cooling tower plume. Also, experiments will be conducted using water samples from Wolf Creek Generating Station and Jeffrey Energy Center to determine recovered water quality, and will consider the first flush and subsequent samples to determine the change in water quality with time. Water quality assessment will focus on salinity, cations and anions, nutrients, and bacteria. Recovered water will be compared to irrigation standards for agricultural production, as well as power plant and industrial requirements. The proposed work will increase fundamental knowledge of droplet motion on flexible, flapping surfaces. Numerical simulations will yield flapping frequencies and amplitudes required for droplets to translate or eject from the surface. Droplet growth with respect to time will be determined with high-speed flow visualization using impinging droplets and condensing droplets. Flapping condenser surfaces will be studied at 301 K and 80 % RH, similar to cooling tower plume conditions. In addition to water collection rates, droplet nucleation, coalescence, and departure will be compared for flapping and stationary surfaces, resulting in an improved understanding of droplet dynamics on oscillating surfaces. Several mechanisms have been identified which may explain superior droplet motion on flapping surfaces: surface tension, air entrapment, and altered contact lines on soft, polymer surfaces. Numerical simulations and experimental validations will be conducted to determine the relative effects of these proposed mechanisms on water collection. Recovered water quality will be assessed and possible industrial and agricultural uses identified. The research objectives are to: 1. Understand the impact of flapping frequency (1-100 Hz) and amplitude on droplet coalescence and ejection from the surface. Butterflies, insects, and flags flap in this frequency range. 2. Model droplet behavior on a soft, flapping surface, including the effects of coalescence, gravity, acceleration, surface tension, and surface energy on droplet formation and motion. 3. Determine the effects of flapping on droplet sweeping and water collection in a controlled environment, similar to a cooling tower plume. 4. Assess recovered water quality for power plant and agricultural applications. In addition, the PIs and students will create an engineering outreach module for middle and high school girls, reaching 100 girls each year through the KAWSE program. The girls will create airbrushed T shirt designs. Using high speed videos, the girls will determine average paint droplet size and assess how paint droplet behavior changes with flapping, analogous to the flapping film for water collection. The relevance of this project to water conservation and daily life will interest and inspire the girls to pursue STEM careers. A simplified version of this module would be conducted every year at the Aggieville Mini Maker Faire, and will engage children in the local community.
期刊论文(1)
专著(0)
科研奖励(0)
会议论文
DOI:
10.1115/1.4047089
发表时间:
2020-09
期刊:
Journal of Heat Transfer-transactions of The Asme
影响因子:
--
作者:
[M. Derby;Allison N. Adams;P. Chakraborty;M. R. Haque;Ryan A. Huber;J. Morrow;G. A. Riley;M. Ross-M.-R]
通讯作者:
M. Derby;Allison N. Adams;P. Chakraborty;M. R. Haque;Ryan A. Huber;J. Morrow;G. A. Riley;M. Ross-M.-R
Collaborative Research: RII Track-2 FEC: Supporting rural livelihoods in the water-stressed Central High Plains: Microbial innovations for climate-resilient agriculture (MICRA)
-
批准号:2316295
-
项目类别:Cooperative Agreement
-
资助金额:$289.65万
-
财政年份:2023
-
负责人:Melanie Derby
-
依托单位:
NRT-INFEWS: Preparing future leaders: Rural resource resiliency (R3)
-
批准号:1828571
-
项目类别:Standard Grant
-
资助金额:$299.84万
-
财政年份:2018
-
负责人:Melanie Derby
-
依托单位:
CAREER: Altering transient soil evaporation mechanisms through hydrophobicity
-
批准号:1651451
-
项目类别:Standard Grant
-
资助金额:$50.0万
-
财政年份:2017
-
负责人:Melanie Derby
-
依托单位:
国内基金
海外基金
水下平面射流振翅运动与频率锁定现象
-
批准号:10472046
-
项目类别:面上项目
-
资助金额:28.0万元
-
批准年份:2004
-
负责人:孙建红
-
依托单位: