Development of low friction and high wear resistant polymercomposites filled with hard porous carbon particulate

硬质多孔碳颗粒填充低摩擦高耐磨聚合物复合材料的开发

基本信息

  • 批准号:
    20760094
  • 负责人:
  • 金额:
    $ 2.75万
  • 依托单位:
  • 依托单位国家:
    日本
  • 项目类别:
    Grant-in-Aid for Young Scientists (B)
  • 财政年份:
    2008
  • 资助国家:
    日本
  • 起止时间:
    2008 至 2009
  • 项目状态:
    已结题

项目摘要

In this study, new polymer composites filled with RB ceramics particulate (polymer/RB ceramics composites) was developed, and their friction and wear properties were experimentally investigated. The weight fraction of RB ceramics particulate was greater than 50 wt% for each resin. The polymer/RB ceramics composites showed lower friction and lower wear than neat resins (PA66, PA11, PBT, POM, PP) under dry and oil lubricated conditions. Particularly, a remarkable reduction of specific wear rate was obtained for the newly developed composites as compared with the neat resins under dry condition (67-98% reduction) or oil lubricated condition (68-99% reduction).
本研究开发了一种新型RB陶瓷颗粒填充聚合物复合材料(聚合物/RB陶瓷复合材料),并对其摩擦磨损性能进行了实验研究。对于每种树脂,RB陶瓷颗粒的重量分数大于50重量%。在干摩擦和油润滑条件下,聚合物/RB陶瓷复合材料的摩擦系数和磨损率均低于纯树脂(PA 66,PA 11,PBT,POM,PP)。特别是在干态和油润滑条件下,新研制的复合材料的比磨损率比纯树脂有显著的降低(降低67 - 98%)。

项目成果

期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
RBセラミックス及びその複合材料の開発と応用
RB陶瓷及其复合材料的开发与应用
  • DOI:
  • 发表时间:
    2011
  • 期刊:
  • 影响因子:
    0
  • 作者:
    坂本信;牧岡諒太;笹川圭右;田邊裕治;吉田秀義;小林公一;Wei Gao;山口健
  • 通讯作者:
    山口健
ポリベンゾイミダゾール樹脂の大気中無潤滑下における摩擦・摩耗特性
聚苯并咪唑树脂在大气中无润滑条件下的摩擦磨损性能
  • DOI:
  • 发表时间:
    2008
  • 期刊:
  • 影响因子:
    0
  • 作者:
    山口健;清水優子;堀切川一男
  • 通讯作者:
    堀切川一男
Tribological properties of newly developed resin/RB ceramics composites
新开发的树脂/RB陶瓷复合材料的摩擦学性能
Development of hard porous carbon materials RB ceramics and their practical applications
硬质多孔碳材料RB陶瓷的研制及其实际应用
Polymer Composites Filled with RB Ceramics Particles as Low Friction and High Wear Resistant Filler
  • DOI:
    10.2474/trol.5.19
  • 发表时间:
    2010-01
  • 期刊:
  • 影响因子:
    1
  • 作者:
    Motoharu Akiyama;Takeshi Yamaguchi;Kunihiro Matsumoto;K. Hokkirigawa
  • 通讯作者:
    Motoharu Akiyama;Takeshi Yamaguchi;Kunihiro Matsumoto;K. Hokkirigawa
{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

YAMAGUCHI Takeshi其他文献

YAMAGUCHI Takeshi的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

{{ truncateString('YAMAGUCHI Takeshi', 18)}}的其他基金

Development of cardiac function prediction system in hot water bathing
热水浴心功能预测系统的研制
  • 批准号:
    16K11937
  • 财政年份:
    2016
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Development of volume hologram printer -Reconstruction of 3D objects texture-
体全息图打印机的开发-3D物体纹理的重建-
  • 批准号:
    16H02819
  • 财政年份:
    2016
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Development of fall-prevention footwear for elderly people based on mechanism of falling caused by slip
基于滑倒致跌机理的老年人防跌倒鞋的研制
  • 批准号:
    22760110
  • 财政年份:
    2010
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Young Scientists (B)
Epistemological and semiotic research on mathematicalclass based on social interaction
基于社会互动的数学课堂认识论和符号学研究
  • 批准号:
    22530975
  • 财政年份:
    2010
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Wide viewing angle floating image display with computer-generated hologram
带有计算机生成全息图的宽视角浮动图像显示
  • 批准号:
    21760265
  • 财政年份:
    2009
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Young Scientists (B)
Research for peace education teaching-materials development centering on Battle of Okinawa
以冲绳战役为中心的和平教育教材开发研究
  • 批准号:
    21730704
  • 财政年份:
    2009
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Young Scientists (B)
Development of dye-sensitized solar cells with over 1 V open circuit voltage
开发开路电压超过1V的染料敏化太阳能电池
  • 批准号:
    20750156
  • 财政年份:
    2008
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Young Scientists (B)
Elucidation of the relationship between nitrogen metabolism and carbohydrate metabolism in rice grain using the detached ear culture method
利用离穗培养法阐明米粒中氮代谢和碳水化合物代谢的关系
  • 批准号:
    20580015
  • 财政年份:
    2008
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Epistemological and semiotic research on construction of mathematical meaning based on social interaction
基于社会互动的数学意义建构的认识论和符号学研究
  • 批准号:
    19530826
  • 财政年份:
    2007
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
The role of phospholipid lipids signal in rice defense reaction and seeds maturation
磷脂信号在水稻防御反应和种子成熟中的作用
  • 批准号:
    16570043
  • 财政年份:
    2004
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)

相似海外基金

Conversion of biowastes to porous carbon materials for green catalysis
将生物废物转化为绿色催化多孔碳材料
  • 批准号:
    DE220101074
  • 财政年份:
    2022
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Discovery Early Career Researcher Award
Fabrication and Structural Optimization of Hierarchically Porous Carbon Materials by Using Stereolithography 3D Printing
利用立体光刻3D打印制备多级孔碳材料并优化其结构
  • 批准号:
    21K14709
  • 财政年份:
    2021
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Early-Career Scientists
I-Corps: Biomanufacturing of Advanced Porous Carbon Materials
I-Corps:先进多孔碳材料的生物制造
  • 批准号:
    1661734
  • 财政年份:
    2016
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Standard Grant
Biomass Derived Porous Carbon Materials for High Rate Supercapacitor Electrodes
用于高倍率超级电容器电极的生物质衍生多孔碳材料
  • 批准号:
    487109-2015
  • 财政年份:
    2015
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Canadian Graduate Scholarships Foreign Study Supplements
階層型多孔質炭素材料による高効率エネルギー貯蔵の研究
多级孔碳材料高效储能研究
  • 批准号:
    15F15381
  • 财政年份:
    2015
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for JSPS Fellows
Fabrication of carbon materials with hierarchical porous structure from poly(vinyl alcohol)
聚乙烯醇多级孔结构碳材料的制备
  • 批准号:
    26289290
  • 财政年份:
    2014
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Adsorption kinetics in hierarchical porous carbide derived carbon materials
分级多孔碳化物衍生碳材料的吸附动力学
  • 批准号:
    224953578
  • 财政年份:
    2012
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Research Grants
Development of new macro-micro hybrid porous carbon materials with woodceramics
木陶瓷新型宏微杂化多孔碳材料的开发
  • 批准号:
    16360349
  • 财政年份:
    2004
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Development of fabrication process of hard porous carbon materials RB ceramics using injection molding and their application to tribo-elements
注射成型硬质多孔碳材料RB陶瓷制备工艺的开发及其在摩擦元件中的应用
  • 批准号:
    15360077
  • 财政年份:
    2003
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Design, Synthesis, and Characterization of Carbon Materials Derived from Conjugated Polymers
共轭聚合物碳材料的设计、合成和表征
  • 批准号:
    15550170
  • 财政年份:
    2003
  • 资助金额:
    $ 2.75万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了