课题基金 / 基金详情

Gold-silver-palladium alloys for laser irradiation-adaptation for JIS-

Gold-silver-palladium alloys for laser irradiation-adaptation for JIS-
激光照射用金银钯合金 - JIS-
批准号:
09672014
负责人:
OHKUMA Kazuo
金额:
$0.64万
依托单位国家:
日本
项目类别:
Grant-in-Aid for Scientific Research (C)
财政年份:
1997
资助国家:
日本
项目状态:
已结题
起止时间:
1997 至 1998

项目摘要

项目成果

OHKUMA Kazuo的其他基金

相似基金

相关文献

中文摘要
翻译
制造卡扣需要高水平的抗拉强度和伸长率。对经激光辐照部分硬化的金银钯合金,仅对其表层进行激光硬化处理,获得了较高的弹性和抗疲劳性能。我们从力学特性方面对激光辐照银钯铜合金进行了评价,得到以下结果:激光表面改性的18wt %Au-4OAg-2OPd-22Cu合金经过软化热处理后,硬度提高(比软化热处理高106%),抗弯强度提高(比软化热处理高15%),伸长率降低(比软化热处理低21%)。激光表面改性的18wt %Au-4OAg-2OPd-22Cu合金在0.100 Na2S溶液中以37 *的温度浸泡3天的光度(L*)为73.07。
英文摘要
High levels of tensile strength and elongation are required to make clasps. We used laser irradiation to harden only the surface layer of a Gold-Silver-Palladium alloy partially hardened by laser irradiation, to yield high elasticity and fatigue resistance. We evaluated laser-irradiated Silver-palladium-copper alloys for laser irradiation, in terms of the mechanical characteristics, and obtained the following results.The laser-produced surface modification in an 18 wt%Au-4OAg-2OPd-22Cu alloy after softening heat treatment, increased hardness (1O6% higher than by softening heat treatment), and bending strength (15% higher than by softening heat treatment) and decreased elongation (21%-Iower than by softening heat treatment). The luminosity (L*) of the laser-produced surface modification in a l8wt%Au-4OAg-2OPd-22Cu alloy immersed in 0.100 Na2S solution at 37 * for 3 days was 73.07.
期刊论文(0)
专著(0)
科研奖励(0)
会议论文
Kazuo Ohkuma: "Gold-silver-palladium Alloys for Laser Irradiation-18wt%Au-40Ag-20Pd-22Cu alloy and 12wt%Au-40Ag-20Pd-24Cu-4Zn alloy-" Odontology. Vol86 No.3. 576-596 (1998)
Kazuo%20Ohkuma:%20"金-银-钯%20合金%20for%20激光%20辐照-18wt%Au-40Ag-20Pd-22Cu%20合金%20和%2012wt%Au-40Ag-20Pd-24Cu-4Zn%20合金-"
DOI: --
发表时间:
期刊:
影响因子: --
作者: []
通讯作者:
Kazuo Ohkuma: "Gold-silver-palladium Alloys for Laser Irradiation-Effects of Gold Addition-" Odontology. Vol86 No.1. 19-36 (1998)
Kazuo Ohkuma:“用于激光照射的金银钯合金-添加金的效果-”牙科。
DOI: --
发表时间:
期刊:
影响因子: --
作者: []
通讯作者:
大熊 一夫: "レーザ用金銀パラジウム合金 -18wt%Au-40Ag-20Pd-22Cu合金と12wt%Au-40Ag-20Pd-24Cu-4Zn合金-" 歯学. 86・3. 578-596 (1998)
大隈和夫:“激光用金银钯合金-18wt%Au-40Ag-20Pd-22Cu合金和12wt%Au-40Ag-20Pd-24Cu-4Zn合金-”牙科86・3(1998)。
DOI: --
发表时间:
期刊:
影响因子: --
作者: []
通讯作者:
大熊 一夫: "レーザ用金銀パラジウム合金 -金添加の影響-" 歯学. 86・1. 19-36 (1998)
大隈和夫:“激光用金银钯合金-添加金的效果-”牙科 86・1(1998)。
DOI: --
发表时间:
期刊:
影响因子: --
作者: []
通讯作者:
To create metallic inlays by sintering the inlays in a microwave oven for four minutes without performing a series of casting processes
  • 批准号:
    15592076
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
  • 资助金额:
    $1.34万
  • 财政年份:
    2003
  • 负责人:
    OHKUMA Kazuo
  • 依托单位:
Surface gold alloys for an adhesion bridge modified by a laser
海外基金