Kinetic heat transfer emitter for direct burner replacement

SecalTKS正在为再生铝行业定制TKE发射器。该项目将验证TKE在铝铸造行业的上级性能和能力。将TKE技术改造为坩埚预热站，并由当地分包商专门建造新制造的坩埚预热器盖，根据本项目的要求-特定的安装。基于IP敏感性的理由，关于TKE的内部工作，只有有限的信息可以公开共享。TKE是一种内部燃烧过程，能够在燃烧前分离甲烷元素，以收集并随后燃烧在精确条件下混合的氢、空气和碳的浓缩元素。这将燃烧的结果，热量传递到分子上，然后从发射器排出。机械振动大大减少了处理时间。与传统燃烧器火焰相比，它具有非平行穿透能力，喷出的羽流初始温度仅为150 ℃，低于燃烧器火焰的8%，但可以达到并维持1,350？的温度。

SecalTKS are tailoring TKE emitter to the secondary aluminium industry.This project will validate TKE's superior performance and capability in the aluminium casting industry.Retrofitting TKE technology to a crucible pre-heat station with a purpose-built newly fabricated crucible pre-heater lid by a local subcontractor, as required for this project-specific installation.Only a limited level of information can be shared publicly regarding the internal workings of TKE on the grounds of IP sensitivity.TKE is an internal combustion process able to disassociate the elements of methane, pre-combustion, to harvest and then combust the concentrated elements of hydrogen, air, and carbon, mixed under precise conditions. This delivers the result of combustion, heat onto the molecule before being discharged from the emitter.The mechanical vibration dramatically reduces process time. It has unparallel penetration capability over the conventional burner flame.The emitted plume has an initial temperature of only 150?, less than 8% of that of a burner flame, but can reach and sustain temperatures of 1,350?.