ERICE- Electronics Recycling In A Circular Economy

ERICE-循环经济中的电子产品回收

• 批准号: 101755
• 金额: $ 19.82万
• 依托单位: IN2TEC LIMITED
• 依托单位国家: 英国
• 项目类别: Collaborative R&D
• 财政年份: 2014
• 资助国家: 英国
• 起止时间: 2014 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=101755
• 关键词: ERICE; Electronics; Recycling; Circular; Economy

With the predicted move from electronics ownership to leasing style, many equipment suppliers are searching for technologies to allow easier in-house recycling. ERICE will develop a full commercial, easy-to-dissassembly, sustainable electronics assembly technology suitable for the circular economy, using recycled materials from an initial demonstrator. The project will develop, manufacture and test materials and techniques for low temperature fabrication using a series of special polymer layers and binders which will allow straight forward, end-of-life unzipping of the constituent parts. After disassembly, the materials and components from this demonstrator will be recovered and subsequently reused to fabricate and test a further demonstrator. Building on an earlier successful concept project, the aim is to reuse or recycle over 90% of the materials from the first demonstrator into the second with minimal energy usage. It is antipated that this level of recovery and reuse will represent a world first for the electronics manufacturing industry.Techniques will be developed to allow component assemblies on both sides, significantly increasing the technologies potential markets.

随着电子产品所有权向租赁方式的转变，许多设备供应商正在寻找更容易进行内部回收的技术。ERICE将开发一种完全商业化的，易于拆卸的，可持续的电子组装技术，适用于循环经济，使用来自初始演示器的回收材料。该项目将使用一系列特殊的聚合物层和粘合剂开发、制造和测试低温制造材料和技术，这些材料和技术将允许直接、寿命终止地解开组成部件。拆卸后，该演示器的材料和部件将被回收，随后重新用于制造和测试另一个演示器。在早期成功的概念项目的基础上，目标是以最小的能源消耗将第一个演示器中90%以上的材料重复使用或回收到第二个演示器中。预计这种回收和再利用的水平将代表电子制造业的世界第一。将开发技术，使组件组装在双方，显着增加技术的潜在市场。