Real Time 3D Modelling for Subsea Asset Management - Feasibility Study

海底资产管理的实时 3D 建模 - 可行性研究

• 批准号: 102921
• 金额: $ 6.68万
• 依托单位: ROVCO LIMITED
• 依托单位国家: 英国
• 项目类别: Collaborative R&D
• 财政年份: 2017
• 资助国家: 英国
• 起止时间: 2017 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=102921
• 关键词: Real; Time; 3D; Modelling; Subsea

Rovco are developing a system that will improve the way in which subsea assets are managed through the development of a 3D modelling process which will allow inspection personnel to be based onshore. The aim of the system is to make asset management far more cost efficient, while also improving safety for staff and the environment. The final product will allow chartered offshore vessels on inspection campaigns to be smaller, while reducing costs and the number of personnel required at sea. Using visual 3D models of subsea assets will allow onshore assessment by all interested parties meaning decision making can be referred as needed, and onshore communication between all of the parties will be made more effective. This will allow faults to be spotted more efficiently and repairs to be made to damaged assets well before the point of failure, decreasing the chance of environmental pollution by mitigating the chance of corrosion going undetected. Initially a feasibility study will be conducted to ensure that industry is ready for this solution, and that it is viable. Alongside this an example of the final output will be produced to help recruit collaborators and assist in defining the project direction during market analysis.

Rocker正在开发一个系统，该系统将通过开发3D建模过程来改善海底资产的管理方式，该过程将允许检查人员在岸上工作。该系统的目的是使资产管理更具成本效益，同时改善工作人员和环境的安全。最终产品将使进行检查活动的包租近海船只变得更小，同时减少成本和海上所需的人员数量。使用水下资产的可视化3D模型将允许所有相关方进行陆上评估，这意味着可以根据需要进行决策，并且所有各方之间的陆上通信将更加有效。这将允许更有效地发现故障，并在故障点之前对受损资产进行修复，通过减少未被发现的腐蚀机会来减少环境污染的机会。最初将进行可行性研究，以确保工业界为这一解决方案做好准备，并确保它是可行的。除此之外，还将生成最终输出的示例，以帮助招募合作者，并在市场分析期间帮助确定项目方向。