Design-for-manufacture of 3D concrete printed structural composites (DfM:3DCP)

3D 混凝土打印结构复合材料的设计制造 (DfM:3DCP)

• 批准号: EP/S019650/1
• 负责人: Luca Susmel
• 金额: $ 73.59万
• 依托单位: University of Sheffield
• 依托单位国家: 英国
• 项目类别: Research Grant
• 财政年份: 2019
• 资助国家: 英国
• 起止时间: 2019 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=EP%2FS019650%2F1
• 关键词: Design; manufacture; 3D; concrete; printed

Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.

目前，所有资助研究的摘要都不能在GTR中找到。这通常是因为在提交提案时并不需要摘要，但可能是因为它包含了个人详细信息等敏感信息。

项目成果

Theory of Critical Distances and static/dynamic fracture behaviour of un-reinforced concrete: length scale parameters vs. material meso-structural features

• DOI: 10.1016/j.engfracmech.2021.108220
• 发表时间: 2022-01
• 期刊: Engineering Fracture Mechanics
• 影响因子: 5.4
• 作者: N. Alanazi;L. Susmel

Estimating static/dynamic strength of notched unreinforced concrete under mixed-mode I/II loading

• DOI: 10.1016/j.engfracmech.2020.107329
• 发表时间: 2020-09
• 期刊: Engineering Fracture Mechanics
• 影响因子: 5.4
• 作者: N. Alanazi;L. Susmel

Third RILEM International Conference on Concrete and Digital Fabrication - Digital Concrete 2022

第三届 RILEM 国际混凝土和数字化制造会议 - Digital Concrete 2022

• DOI: 10.1007/978-3-031-06116-5_68
• 发表时间: 2022
• 作者: Kolawole J

The Theory of Critical Distances to assess the effect of cracks/manufacturing defects on the static strength of 3D-printed concrete

用于评估裂缝/制造缺陷对 3D 打印混凝土静态强度影响的临界距离理论

• DOI: 10.1016/j.engfracmech.2022.108563
• 发表时间: 2022
• 期刊: Engineering Fracture Mechanics
• 影响因子: 5.4
• 作者: Alanazi N

The Theory of Critical Distances to perform the static assessment of 3D-printed concrete weakened by manufacturing defects and cracks

临界距离理论对因制造缺陷和裂缝而弱化的 3D 打印混凝土进行静态评估

• DOI: 10.1016/j.prostr.2022.12.041
• 发表时间: 2022
• 期刊: Procedia Structural Integrity
• 作者: Alanazi N