Kinetic heat transfer emitter for direct burner replacement

secalks正在为二次铝工业量身定制TKE发射器。该项目将验证TKE在铝铸件行业的卓越性能和能力。根据本项目具体安装的要求，由当地分包商将TKE技术改造为坩埚预热站，并安装专门建造的新制造的坩埚预热盖。基于知识产权敏感性，关于TKE的内部运作，只能公开分享有限的信息。TKE是一种内燃过程，能够在燃烧前分离甲烷元素，收集然后燃烧浓缩的氢，空气和碳元素，在精确的条件下混合。这提供了燃烧的结果，在从发射器排出之前，热量到分子上。机械振动大大缩短了加工时间。它具有超越传统燃烧器火焰的穿透能力。喷出的羽流的初始温度只有150？，不到燃烧器火焰的8%，但可以达到并维持1350℃的温度。

SecalTKS are tailoring TKE emitter to the secondary aluminium industry.This project will validate TKE's superior performance and capability in the aluminium casting industry.Retrofitting TKE technology to a crucible pre-heat station with a purpose-built newly fabricated crucible pre-heater lid by a local subcontractor, as required for this project-specific installation.Only a limited level of information can be shared publicly regarding the internal workings of TKE on the grounds of IP sensitivity.TKE is an internal combustion process able to disassociate the elements of methane, pre-combustion, to harvest and then combust the concentrated elements of hydrogen, air, and carbon, mixed under precise conditions. This delivers the result of combustion, heat onto the molecule before being discharged from the emitter.The mechanical vibration dramatically reduces process time. It has unparallel penetration capability over the conventional burner flame.The emitted plume has an initial temperature of only 150?, less than 8% of that of a burner flame, but can reach and sustain temperatures of 1,350?.