PHASE III RADIATION ENCLOSURES

这个子项目是利用由NIH/NCRR资助的中心拨款提供的资源的许多研究子项目之一。子项目和调查员(PI)可能从另一个NIH来源获得了主要资金，因此可能会出现在其他CRISE条目中。列出的机构是针对中心的，而不一定是针对调查员的机构。第三期弯曲磁铁束线辐射外壳的建造已如期完成。辐射外壳的建造和相关公用设施的安装是由泰克尼特屏蔽公司根据合同进行的。APS已经完成了前端准直和快门系统以及人员保护系统的安装。在5月份最后一周恢复APS加速器操作后，成功验证了外壳的辐射完整性，整个24 BM外壳将准备好安装光学组件和实验设备。

This subproject is one of many research subprojects utilizing the resources provided by a Center grant funded by NIH/NCRR. The subproject and investigator (PI) may have received primary funding from another NIH source, and thus could be represented in other CRISP entries. The institution listed is for the Center, which is not necessarily the institution for the investigator. Construction of the Phase III bending magnet beam line radiation enclosures has been completed on schedule. The construction of the radiation enclosures and installation of the associated utilities was performed under contract by Tecknit Shielding, Inc. APS has completed installation of the front end collimation and shutter systems as well as the Personnel Protection System. Following successful validation of the radiation integrity of the enclosures upon resumption of APS accelerator operations the last week in May, the entire 24-BM enclosure will be ready for installation of the optical components and experimental equipment.