DEVELOPMENT OF A NEW FILL SYSTEM FOR THE SAM ROBOT

这个子项目是利用资源的许多研究子项目之一。 由NIH/NCRR资助的中心拨款提供。对子项目的主要支持 子项目的首席调查员可能是由其他来源提供的， 包括美国国立卫生研究院的其他来源。为子项目列出的总成本可能 表示该子项目使用的中心基础设施的估计数量， 不是由NCRR赠款提供给次级项目或次级项目工作人员的直接资金。 一种新的自动填充系统在BL9-1上开发和测试，并用于MC梁线上的斯坦福自动安装(SAM)系统。该系统最大限度地减少了样品夹持杜瓦中的结冰和湍流，并使操作时间更长，而无需更换液氮，从而提高了效率并减少了维护。

This subproject is one of many research subprojects utilizing the resources provided by a Center grant funded by NIH/NCRR. Primary support for the subproject and the subproject's principal investigator may have been provided by other sources, including other NIH sources. The Total Cost listed for the subproject likely represents the estimated amount of Center infrastructure utilized by the subproject, not direct funding provided by the NCRR grant to the subproject or subproject staff. A new auto-fill system was developed and tested on BL9-1 and implemented for the Stanford Auto-Mounting (SAM) systems on the MC beam lines. The system minimizes icing and turbulence in the sample holding dewar, and enables operations for longer periods of time without having to exchange the liquid nitrogen, improving efficiency and reducing maintenance.