Image-based modeling of nonlinear and anisotropic intervertebral disc mechanics

描述(由申请人提供)：本申请涉及广泛的挑战领域(06)使能技术，以及具体的挑战主题06-EB-109：模型驱动的生物医学技术开发。肌肉骨骼组织的结构模型计算内部应力和应变是研究损伤和失效机制的一项重要技术。此外，准确的模型为预测手术干预、装置植入和组织工程的后果提供了理解。这项建议解决了对椎间盘进行建模的挑战。三十多年来，有限元模型已被证明对研究圆盘力学很有价值。然而，目前可用的椎间盘模型有三个显著的限制，将在本提案中解决，以提高预测机械行为的保真度。首先，输入到模型中的测量到的纤维环(AF)特性是基于切除的组织测试。切除组织会破坏纤维结构，这将伪影引入材料特性测量中，并且不代表由盘成分和微结构的逐渐改变所反映的不均匀性。其次，切除组织样本消除了亚结构之间的界面。第三，目前的圆盘模型使用嵌入在AF的各向同性实体单元中的“电缆”单元。表面上，这代表了AF结构；然而，AF的组成和微体系结构是复杂的，需要更好地反映AF各向异性、非线性和非均质性的本构公式。该方案的目的是开发一种基于图像的椎间盘模型，该模型融合了组织的非均匀、各向异性和非线性材料属性。我们将使用复杂的使能技术获得具有空间分布的材料属性的3D结构模型。目的1：将已建立的2D MRI扩展到载荷作用下的高分辨率3D MRI。评估脉冲序列的性能并根据需要调整序列参数，以优化分辨率、对比度和信噪比。目的2：对人体腰椎间盘在压缩、弯曲和扭转等多轴载荷作用下的图像进行成像，并使用最先进的微分同形图像配准技术计算三维应变图。目的3：将逆方法应用于已建立的本构方程和测量的应变图，以确定材料特性。通过预测特性计算中未使用的加载配置下的应变来验证模型和材料特性。使用不同的加载模式进行参数回归，重复计算研究。在这项研究完成后，我们将能够准确地预测由于纤维成分和纤维外基质的微观结构贡献以及椎间盘亚结构之间的相互作用而导致的椎间盘内的应力和应变。原位测定材料特性是一种创新的解决方案，解决了目前切除组织测试中伪影的局限性和子结构界面的破坏。这项工作的意义在于开发了一种无价的工具，用于精确建模椎间盘力学，这对于理解椎间盘的机械故障和治疗它是核心的。该系统最初将应用于身体人体组织；然而，成像方面的长期进展可能会扩展到活体应用和患者特定的建模和分析。经济影响本挑战提案中描述的拟议实验将在宾夕法尼亚大学(2.5名博士后研究人员，0.2名技术人员)和明尼苏达大学(1名研究生，0.5名博士后研究人员)的站点之间创造四个全职职位。宾夕法尼亚大学医学院在创造新知识和新疗法以改善人类健康以及培训下一代科学领袖方面是国际公认的领导者。为了追求这些目标，宾夕法尼亚大学医学院广泛而深入地将其经济影响扩展到宾夕法尼亚州、新泽西州和特拉华州。最近的研究将2008年的3.7万个就业机会和54亿美元的经济活动归功于宾夕法尼亚大学医学。作为明尼苏达州唯一的研究型大学，明尼苏达大学是该州的经济引擎。因此，明尼苏达大学的影响是广泛的，有21,500多个工作岗位直接与授予该大学的研究补助金有关。本申请涉及广泛的挑战领域(06)使能技术，以及具体的挑战主题06-EB-109：模型驱动的生物医学技术开发。计算阀瓣内部应力和应变的结构模型对于研究阀瓣损伤、撕裂和失效的机制是必不可少的。此外，准确的模型将为预测手术干预、装置植入和组织工程的后果提供理解。不幸的是，目前可用的圆盘模型缺乏准确预测力学行为的保真度。该方案的目的是开发一种基于图像的椎间盘模型，该模型融合了组织的非均匀、各向异性和非线性材料属性。本挑战提案中描述的拟议实验将在宾夕法尼亚大学(2.5名博士后研究人员，0.2名技术人员)和明尼苏达大学(1名研究生，0.5名博士后研究人员)的站点之间创造四个全职职位。

DESCRIPTION (provided by applicant): This application addresses the broad Challenge area (06) Enabling Technologies, and the specific Challenge Topic, 06-EB-109: Model-Driven Biomedical Technology Development. Structural models of musculoskeletal tissues to calculate internal stresses and strains are an essential technology to investigate mechanisms of injuries and failure. Moreover accurate models provide understanding to predict the consequence of surgical interventions, device implantation, and tissue engineering. This proposal addresses the challenge of modeling the intervertebral disc. For over three decades finite element models have proved valuable to study disc mechanics. However, the currently available disc models have three significant limitations that will be addressed in this proposal for improved fidelity to predict mechanical behavior. First, the measured annulus fibrosus (AF) properties that are input into models are based on excised tissue tests. Excising the tissue disrupts the fiber structure, which introduces artifacts into the material property measurement and does not represent the inhomogeneities that are reflected by the gradual alterations in disc composition and microarchitecture. Second, excising tissue samples eliminates the interfaces between the sub-structures. Third, current disc models use "cable" elements that are embedded within an isotropic solid element for the AF. Ostensibly this represents the AF structure; however, the AF composition and microarchitecture is complex, requiring a constitutive formulation that better reflects the AF anisotropy, nonlinearity, and inhomogeneity. The objective of this proposal is to develop an image-based disc model that incorporates the tissue's inhomogeneous, anisotropic, and nonlinear material properties. We will obtain a 3D structural model with spatially distributed material properties using sophisticated enabling technologies. Aim 1: Extend the established 2D MRI to high resolution 3D MRI of the disc under load. Evaluate the performance of the pulse sequence and adjust the sequence parameters as required to optimize resolution, contrast, and signal-to-noise ratio. Aim 2: Image human discs under multi-axial loading configurations including compression, bending, and torsion and calculate 3D strain maps using state-of-the-art diffeomorphic image registration. Aim 3: Apply inverse methods to the established constitutive formulation and the measured strain maps to determine material properties. Validate the model and material properties by predicting strain under loading configuration not used in property calculations. Repeat the computational study using different loading modes for parameter regression. At completion of this study, we will be able to accurately predict the stresses and strains within the disc due to the microstructural contribution of the fibrillar components and extrafibrillar matrix and in response to interactions between the disc substructures. Determining material properties in situ is an innovative solution to the current limitations of artifacts in excised tissue tests and the disruption of sub-structural interfaces. The significance of this work lies in the development of an invaluable tool for accurate modeling of disc mechanics, which is central to both understanding mechanical failure of the disc and treating it. This system will initially be applied to cadaveric human tissues; however, long term advances in imaging may permit extension to in vivo application and patient-specific modeling and analysis. Economic impact The proposed experiments described in this Challenge Proposal will create four full time positions between the sites at the University of Pennsylvania (2.5 postdoctoral researchers, 0.2 technicians) and University of Minnesota (1 graduate student, 0.5 postdoctoral researchers). The University of Pennsylvania School of Medicine is an internationally recognized leader in the creation of new knowledge and therapies to improve human health, and in the training of the next generation of scientific leaders. In pursuit of these goals, the UPenn School of Medicine extends its economic impact widely and deeply throughout Pennsylvania, New Jersey, and Delaware. Recent studies attributed 37,000 jobs and $5.4 billion in economic activity to Penn Medicine in 2008. As Minnesota's only research university, the University of Minnesota is the economic engine for the state. As such the University of Minnesota's impact is felt far and wide, with more than 21,500 jobs directly related to research grants awarded to the University. This application addresses the broad Challenge area (06) Enabling Technologies, and the specific Challenge Topic, 06-EB-109: Model-Driven Biomedical Technology Development. Structural models that calculate the disc internal stresses and strains are essential to investigate mechanisms of disc injuries, tears, and failure. Moreover accurate models will provide understanding to predict the consequence of surgical interventions, device implantation, and tissue engineering. Unfortunately, the currently available disc models lack the fidelity to predict mechanical behavior accurately. The objective of this proposal is to develop an image-based disc model that incorporates the tissue's inhomogeneous, anisotropic, and nonlinear material properties. The proposed experiments described in this Challenge Proposal will create four full time positions between the sites at the University of Pennsylvania (2.5 postdoctoral researchers, 0.2 technicians) and University of Minnesota (1 graduate student, 0.5 postdoctoral researchers).