RIA: Condition Monitoring and Control: An Integrated, System-Theoretic Approach

RIA：状态监测和控制：一种集成的系统理论方法

• 批准号: 9210178
• 负责人: Arthur Helmicki
• 金额: $ 9万
• 依托单位: University of Cincinnati Main Campus
• 依托单位国家: 美国
• 项目类别: Continuing Grant
• 财政年份: 1992
• 资助国家: 美国
• 起止时间: 1992-09-01 至 1997-08-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=9210178&HistoricalAwards=false
• 关键词: RIA; Condition; Monitoring; Control; Integrated

Modern engineering systems often utilize closed-loop control in order to meet requirements on system performance. Condition monitoring systems augmenting the control system are seen to be a means of enhancing reliability, reducing operating cost and extending system lifetime. This research is a general system- theoretic approach which will promote the integrated analysis and design of condition monitoring and control systems. This approach is based on recent results from algebraic systems theory allowing the integrated condition monitoring and controls problem to be imbedded in a general control systems architecture. The capabilities of this approach will be demonstrated as follows: First, this approach will be used to illuminate the extent to which condition monitoring and control system design objectives impact one another. Second, existing control system design tools will be extended to handle the design of integrated condition monitoring and control systems. Third, these tools will be used to obtain analytical results quantifying the design trade-offs involved. Fourth, these tools will be used to address open research questions related to generating condition monitoring system specifications and selecting condition monitoring sensor suites. Finally, it will be shown that the above results can be extended to classes of nonlinear plants.*** //

现代工程系统通常会利用闭环控制，以满足系统性能的要求。条件监测系统增加控制系统是提高可靠性，降低运营成本和延长系统寿命的一种手段。这项研究是一种通用的系统理论方法，它将促进条件监控和控制系统的综合分析和设计。这种方法基于代数系统理论的最新结果，允许在通用控制系统体系结构中嵌入集成条件监测和控制问题。该方法的功能将如下证明：首先，该方法将用于阐明条件监控和控制系统设计目标相互影响的程度。其次，将扩展现有的控制系统设计工具以处理集成状态监控和控制系统的设计。第三，这些工具将用于获得分析结果，以量化涉及的设计权衡。第四，这些工具将用于解决与生成条件监控系统规格和选择条件监视传感器套件有关的开放研究问题。最后，将显示上述结果可以扩展到非线性植物类别。*** //