Contact Interface Modeling and Stiffness-based Biomedical Diagnosis with Sensing Technology Towards a Better Quality of Life

利用传感技术进行接触界面建模和基于刚度的生物医学诊断，提高生活质量

• 批准号: 0800241
• 负责人: Imin Kao
• 金额: $ 23万
• 依托单位: SUNY at Stony Brook
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 2008
• 资助国家: 美国
• 起止时间: 2008-04-01 至 2012-03-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=0800241&HistoricalAwards=false
• 关键词: Contact; Interface; Modeling; Stiffness; based

The objectives of this proposal are (i) to conduct research on the study of the modeling of contact interface and stiffness-based biomedical diagnosis, and (ii) to perform experiments with sensing technology and applications with intelligent diagnosis. The project aims at leveraging and complementing the expertise, research experiences, and infrastructure at both institutes in an international research collaboration between the PI at Stony Brook University and the collaborator, Prof. Makoto Kaneko at Osaka University, under the joint NSF-JST support. The research and technology development are focused on modeling and applications towards "better quality of life." This collaborative US-Japan research strives to deal with research that focus on improving the quality of life by bringing about techniques which enhance the ability to reliably diagnose healthcare issues as well as the prevention of high-risk areas (for example, diabetes and glaucoma) for better quality of life, through the applications and modeling of both direct physical contact and non-contact interfaces. Taking advantage of the international collaboration and exchange, the research project also invites participation of undergraduate students in the STEM disciplines in order to motivate them to choose a career in STEM. The dissemination plan includes an annual symposium to increase the broader impact of this international research collaboration.

本项目的目的是（i）进行接触界面建模和基于刚度的生物医学诊断研究的研究，（ii）进行传感技术实验和智能诊断应用。 该项目旨在利用和补充专业知识，研究经验和基础设施，在斯托尼布鲁克大学的PI和合作者大坂大学的Makoto Kaneko教授之间的国际研究合作中，在NSF-JST的联合支持下，这两个研究所。 研究和技术开发的重点是建模和应用，以实现“更好的生活质量”。“这项美日合作研究致力于通过直接物理接触和非接触界面的应用和建模，带来提高可靠诊断医疗保健问题以及预防高风险领域（例如糖尿病和青光眼）的能力以提高生活质量的技术，从而提高生活质量。 利用国际合作和交流，该研究项目还邀请STEM学科的本科生参与，以激励他们选择STEM职业。 传播计划包括一个年度研讨会，以增加这一国际研究合作的更广泛影响。