Development of Real Time Stress Measurement System by Infrared Thermal Video System
红外热视频系统实时应力测量系统的研制
基本信息
- 批准号:61850019
- 负责人:
- 金额:$ 6.21万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Developmental Scientific Research
- 财政年份:1986
- 资助国家:日本
- 起止时间:1986 至 1987
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
The authors have developed new techniques for the stress analysis and the monitoring of a crack with the aid of an infrared thermal video system. The summary of results are as follows :(1) The method of a real time stress analysis has been developed(2) It is shown that the stress intensity factors at the crack tip can be measured by this method.(3) The method of estimating J-integral has been developed. It can be obtained by measuring the temperature distribution in the plastic zone at the crack tip.(4) The methods of monitoring crack-like-defects have been developed. Three different methods for heating the speciment have been examined. These are (1) self-heating method. (2) high frequency current method, and (3) laser heating method. They are compared each other and applications to the practical problems have been discussed.
作者在红外热像仪的帮助下,发展了裂纹应力分析和监测的新技术。结果表明:(1)提出了一种实时应力分析方法;(2)用该方法可以测量裂纹尖端的应力强度因子;(3)提出了估算J积分的方法。通过测量裂纹尖端塑性区的温度分布,可以得到裂纹尖端的温度分布。(4)建立了裂纹类缺陷的监测方法。研究了三种不同的加热样品的方法。它们是:(1)自热法。(2)高频电流法;(3)激光加热法。对它们进行了比较,并讨论了它们在实际问题中的应用。
项目成果
期刊论文数量(24)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
M. Shiratori,: "Measurement of J-Integral by Thermal Video System" Trans. of JSME, Ser.A.
M. Shiratori,:“通过热视频系统测量 J-Integral” Trans。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
M. Shiratori,: "Measurement of Stress Intensity Factor, K, and J-Integral for Cracked Members by a Scanning Infrared Camera" Trans. of JSME, Ser. A. 53-492. 1699-1705 (1987)
M. Shiratori,:“通过扫描红外相机测量裂纹构件的应力强度因子、K 和 J 积分” Trans。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
M. Shiratori,: "Monitoring of Cracks by Thermal Video System" Trans. of JSME, Ser. A.
M. Shiratori,:“通过热视频系统监测裂缝” Trans。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
白鳥正樹,: 日本機械学会論文集. 53-492. 1699-1705 (1987)
Masaki Shiratori:日本机械工程师学会会议记录 53-492 1699-1705 (1987)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
SHIRATORI Masaki其他文献
SHIRATORI Masaki的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('SHIRATORI Masaki', 18)}}的其他基金
Study on Evaluation Method for Safety Margin of Degraded Piping Against Seismic Loading with Multi-Fracture Mode
多断裂模式退化管道抗震安全裕度评估方法研究
- 批准号:
16360049 - 财政年份:2004
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Reliability Design and Multi-mode Fracture Control of Micro Joint Structure in Advanced Electronics Packaging
先进电子封装微接头结构的可靠性设计与多模式断裂控制
- 批准号:
14350052 - 财政年份:2002
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Study on Impact Strength Evaluation of Micro-Solder Joints in Mobile Electronic Units
移动电子装置微焊点冲击强度评价研究
- 批准号:
11555029 - 财政年份:1999
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Scientific Research (B).
Thermal Fatigue Life Estimation for Lead - Free Solder Joints
无铅焊点的热疲劳寿命估算
- 批准号:
10450046 - 财政年份:1998
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Development of Micro-displacement and low-load fatigue tester and fatigue-strength estimating method for micro structures
微位移低载荷疲劳试验机及微结构疲劳强度估算方法的研制
- 批准号:
09555028 - 财政年份:1997
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Development of CAE System for Fatigue Strength Design of Solder Joints in Surface Mount Devices
表面贴装器件焊点疲劳强度设计CAE系统的开发
- 批准号:
07455051 - 财政年份:1995
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
The Development of the System that Analyzes Surface Cracks by the Influence Function Method
影响函数法表面裂纹分析系统的研制
- 批准号:
07555028 - 财政年份:1995
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Scientific Research (A)
STRENGTH EVALUATION OF THERMAL CYCLING FATIGUE FOR SURFACE-MOUNDED SOLDER JOINTS
表面贴装焊点热循环疲劳强度评估
- 批准号:
05555031 - 财政年份:1993
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Developmental Scientific Research (B)
DEVELOPMENT OF FLAW DETECTING SYSTEM BY INFRARED THERMOGRAPHY
红外热像探伤系统的研制
- 批准号:
05452124 - 财政年份:1993
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for General Scientific Research (B)
Development of Hybrid System for Three-Dimensional Heat Conduction and Thermal Stress Analysis Based upon Infraded Temperature Measurement.
基于红外温度测量的三维热传导和热应力分析混合系统的开发。
- 批准号:
02650067 - 财政年份:1990
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for General Scientific Research (C)
相似海外基金
Prediction of Deterioration of Tuff Stones Used for Building Exterior Based on Thermal Moisture Stress Analysis
基于热湿应力分析的建筑外墙凝灰岩劣化预测
- 批准号:
23K04152 - 财政年份:2023
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Stress analysis and vibration of elastic and viscoelastic systems (Composite materials and structures)
弹性和粘弹性系统的应力分析和振动(复合材料和结构)
- 批准号:
RGPIN-2017-06717 - 财政年份:2022
- 资助金额:
$ 6.21万 - 项目类别:
Discovery Grants Program - Individual
Stress analysis and vibration of elastic and viscoelastic systems (Composite materials and structures)
弹性和粘弹性系统的应力分析和振动(复合材料和结构)
- 批准号:
RGPIN-2017-06717 - 财政年份:2021
- 资助金额:
$ 6.21万 - 项目类别:
Discovery Grants Program - Individual
Development of mattress hardness and learning model effective for pressure ulcer prevention in prone position surgery using stress analysis
利用应力分析开发可有效预防俯卧位手术中压疮的床垫硬度和学习模型
- 批准号:
21K17361 - 财政年份:2021
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Early-Career Scientists
Development of stress analysis software to guide waste package design for use in Deep Borehole Disposal of high-level nuclear waste.
开发应力分析软件,指导用于高放核废料深钻孔处置的废物包装设计。
- 批准号:
2598011 - 财政年份:2021
- 资助金额:
$ 6.21万 - 项目类别:
Studentship
Unraveling the mechanism of anxiety and depression by early-life stress: Analysis of stress information processing circuits
揭示早期生活压力导致焦虑和抑郁的机制:压力信息处理回路分析
- 批准号:
20K16486 - 财政年份:2020
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Early-Career Scientists
Residual stress analysis by neural network incorporating cutting simulation
结合切削模拟的神经网络残余应力分析
- 批准号:
20H02051 - 财政年份:2020
- 资助金额:
$ 6.21万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Dynamic Stress Analysis for the Optimisation of Push Scooters
推式滑板车优化的动态应力分析
- 批准号:
2441780 - 财政年份:2020
- 资助金额:
$ 6.21万 - 项目类别:
Studentship
Stress analysis and vibration of elastic and viscoelastic systems (Composite materials and structures)
弹性和粘弹性系统的应力分析和振动(复合材料和结构)
- 批准号:
RGPIN-2017-06717 - 财政年份:2020
- 资助金额:
$ 6.21万 - 项目类别:
Discovery Grants Program - Individual
Intergranular residual stress analysis of irradiated Zr-2.5Nb pressure tube material
Zr-2.5Nb压力管材料辐照后晶间残余应力分析
- 批准号:
531068-2018 - 财政年份:2019
- 资助金额:
$ 6.21万 - 项目类别:
Collaborative Research and Development Grants