STUDY ON CONSTRUCTION METHOD OF PROGRESSIVE LEARNING MEASUREMENT SYSTEM

本课题的研究成果如下：(A)提出变焦功能测量的概念，以减少测量系统对封闭信号场位置测量的偶然误差。(B)作为上述概念的具体方法，提出了结合亮度比和照明功能初始相位的调整方法。(C)构建了原型系统，验证了所提出方法的有效性，实验结果表明，变焦功能方法是根据设置灵敏度来减小误差的有效方法。(D)该测量是渐进式学习测量系统的一个例子，(E)提出了渐进式学习测量系统的设计方法。(F)提出了“封闭信号场多观察点位置测量”的实现方法。

The results of this research project are as follows.(a) The concept of the zooming functional measurement was presented to reduce the accidental error of measuring system as for the position measurement by the enclosed signal field.(b) As the concrete method for above concept, the adjustment method of combining both the brightness ratio and the initial phase of lighting function is proposed.(c) The prototype system is constructed to verify the validity of the proposed method, and the experimental results show that the zooming functional method is effective to reduce the error according to the setting sensitivity.(d) This measurement is an example of the "progressive learning measurement system, " which is effective to execute successively from macro to micro measurement.(e) The designing methodology of the progressive learning measurement system was shown.(f) Realizing method of "position measurement with multiple observing point by enclosed signal field" was presented.