Fabrication of Denture Frameworks Using Titanium Alloys
Fabrication of Denture Frameworks Using Titanium Alloys
批准号:
7871396
负责人:
Marie Koike
金额:
$11.85万
依托单位国家:
美国
项目类别:
财政年份:
2009
资助国家:
美国
项目状态:
已结题
起止时间:
2009-07-01 至 2011-08-31
关键词:
Adverse effectsAllergic ReactionAlloysAluminumApplications GrantsBenignBiocompatibleCharacteristicsClinicalClinical ResearchClinical TrialsComplete DentureDefectDentalDental ProsthesisDental SpecialtiesDentistryDenture, Partial, RemovableDenturesDevelopmentDiagnostic radiologic examinationDisadvantagedEdentulous MouthEducational process of instructingElasticityElderlyEnvironmentExcisionExhibitsFatigueGasesGoalsGold AlloysHumanHypersensitivityInvestigationLifeLongevityMasticationMedicalMetalsMethodsNaturePatientsPatternPerformancePopulationPorosityProcessPropertyProsthesisProsthodontic specialtyQualifyingQuality of lifeReportingReproducibilityResearchResearch DesignResistanceRestRoentgen RaysScientistSocial WelfareSolutionsStructureTechniquesTestingTitaniumUnited States National Institutes of HealthVanadiumVisualWaxesarmattenuationbasebiomaterial compatibilitycareercollegecostdental castingdesigndisability burdenexperienceimprovedinnovationpublic health relevancesoundsuccess
中文摘要
描述(由申请人提供):安全有效的牙科治疗对于维持良好的生活质量是不可或缺的,特别是对于人口中越来越多的老年人。由于许多无牙或部分无牙的患者,对可摘局部和全口义齿的需求并没有减少。金属假牙通常使用Co-Cr或Au-Pd合金制作,但这些金属对某些患者的不良影响(即过敏反应)一直在增加。解决这个问题的一个办法是停止使用这些引起过敏的合金,代之以钛。用钛假体治疗已经取得了一些临床成功。纯钛[商业纯钛(CP Ti)]或含铝、钒或两者的钛合金一直使用到现在。然而,科学家们对钒的生物相容性提出了担忧,因此更适合生物相容性更好的钛合金。本研究的总体目标是通过研究钛合金制造可摘局部义齿所需的某些特性来检验其实用性。本研究的三个目的是:1)确定用钛合金铸造制造声音可摘义齿框架的可行性;2)评价铸造钛合金义齿框架卡环臂固位力及固位力衰减情况;3)评价钛合金卡扣、咬合架、底座连接板的抗疲劳性和永久变形性。在本研究中,从贝勒牙科学院近十年来广泛研究的二元和三元钛合金中选择了两种钛合金,实验用Ti- 5al - 5cu和商用Ti- 5Al-1Fe。与传统的钴铬牙科铸造合金相比,这些合金具有更高的屈服强度和更低的弹性模量,表明用于制造可移动局部义齿的性能更好。传统的义齿框架设计将用这些金属铸造。将使用视觉缺陷排序来评估铸造框架的完整性。x射线照相将用于检测铸件缺陷和气孔。在铸造过程中,还将检查框架的任何尺寸变化。由于卡环的固位是影响假体寿命的重要因素,因此将评估钛卡环固位力的稳定性,以及卡环的抗疲劳性和变形性。本研究结果将作为钛合金在口腔修复体中应用的R01提案(包括临床试验)所需的基线信息。
英文摘要
DESCRIPTION (provided by applicant): Safe and effective dental treatment is indispensable for maintaining a good quality of life, particularly for the increasing numbers of the elderly in the population. Because of the many edentulous or partially edentulous patients, the need for removable partial and complete dentures has not declined. Metallic dentures are commonly fabricated using Co-Cr or Au-Pd alloys but the adverse effect of these metals to some patients (i.e., allergic reactions) has been increasing. One solution to this problem is to discontinue using these allergy- causing alloys and to replace them with titanium. Treatment with titanium prostheses has resulted in some clinical successes. Pure titanium [commercially pure titanium (CP Ti)] or titanium alloys containing aluminum, vanadium, or both, have been used until now. However, scientists have raised concerns about the biocompatibility of vanadium, so a more biocompatible titanium alloy is preferable. The overall objective of this proposed study is to examine the practicality of fabricating removable partial dentures from titanium alloys by studying certain characteristics necessary for sound, long-lasting prostheses. The three aims of the study are: 1) to determine the feasibility of fabricating sound removable denture frameworks cast from titanium alloys; 2) to evaluate the retentive force and the attenuation of the retentive force of the clasp arms of the cast titanium alloy denture frameworks; and 3) to evaluate the resistance to fatigue and permanent deformation of clasps, occlusal rests, and base connector plates made of titanium alloys. For this present proposal, two titanium alloys, experimental Ti-5Al-5Cu and commercial Ti- 5Al-1Fe, were selected from a number of binary and ternary titanium alloys studied extensively at Baylor College of Dentistry during the last ten years. These alloys have a higher yield strength and a lower modulus of elasticity than conventional Co-Cr dental casting alloys, suggesting better performance when used to fabricate removable partial dentures. Conventional denture framework designs will be cast with these metals. The cast frameworks will be evaluated for completeness of casting using a visual defect ranking. X-ray radiography will be used to detect casting defects and porosity. The frameworks will also be checked for any dimensional changes during the casting process. Since the retention of the clasps is an important factor to prosthesis longevity, the stability of the retentive force of the titanium clasps will be evaluated, as well as the fatigue resistance and deformation of the clasps. The results of this study will be utilized as baseline information needed for a more extensive study in an R01 proposal of the application of titanium alloys to dental prostheses, including clinical trials.
PUBLIC HEALTH RELEVANCE: Titanium is a very useful material for medical or dental purposes because it is benign in contact with the body. This study will investigate certain aspects of adapting titanium to the fabrication of removable partial dentures. Because of its biocompatible nature and low cost, the use of titanium and its alloys has the potential to benefit many people who require dental treatment with dentures.
期刊论文(1)
专著(0)
科研奖励(0)
会议论文
Fabrication of titanium removable dental prosthesis frameworks with a 2-step investment coating method.
采用两步熔模涂层法制造钛可摘牙假体框架。
DOI:
10.1016/s0022-3913(12)60098-5
发表时间:
2012
期刊:
The Journal of prosthetic dentistry
影响因子:
--
作者:
[Koike,Mari, Hummel,SusanK, Ball,JohnD, Okabe,Toru]
通讯作者:
Okabe,Toru
Fabrication of Denture Frameworks Using Titanium Alloys
-
批准号:7738642
-
项目类别:
-
资助金额:$11.97万
-
财政年份:2009
-
负责人:Marie Koike
-
依托单位:
海外基金