Lattice materials with graded mechanical properties for the development of a novel hip-replacement implant
Lattice materials with graded mechanical properties for the development of a novel hip-replacement implant
批准号:
312544-2012
负责人:
Pasini, Damiano
金额:
$2.77万
依托单位:
依托单位国家:
加拿大
项目类别:
Discovery Grants Program - Individual
财政年份:
2015
资助国家:
加拿大
项目状态:
已结题
起止时间:
2015-01-01 至 2016-12-31
中文摘要
髋关节置换术的平均寿命为15-20年,之后需要进行翻修手术。翻修手术是不受欢迎的,有问题的,而且不如一次替代手术成功。问题是目前的种植体能力不足,无法保持宿主骨的质量,因此不能充分确保修复后的种植体就位。本研究的目的是为人工全髋关节置换术开发一种新型的材料微结构,既能延长假体寿命,又能保持宿主骨的质量,并能提供稳定的假体固定。建议的材料是钛合金Ti-6Al-4V晶格;其突破性特征在于材料性能的可控梯度,其设计符合骨骼的局部性能,提供前所未有的弹性和强度性能以及卓越的疲劳、损伤和耐磨性。新的假体将加强对需要初次和翻修髋关节置换的患者的治疗,降低翻修手术的需要和相关的医疗成本;如果进行翻修手术,它将提高其成功率。
虽然长期愿景是让植入物市场做好准备,但具体的短期目标侧重于开发晶格材料设计的模型和方法,然后进行实验验证。预期的成果包括1)开发适合于组织骨支架的晶格细胞拓扑的弹塑性、强度和疲劳性能的多尺度模型;2)以最小的磨损、骨吸收和种植体-骨的微运动对由梯度晶格材料制成的股骨柄和髋臼假体进行多目标优化。
这项研究将培养一批高素质的研究人员,他们配备了晶格材料、多尺度力学、生物力学、生物医学工程、设计优化和疲劳测试方面的尖端、跨学科专业知识。这些学生毕业后将刺激加拿大整形外科公司的发展和形成,这将为加拿大创造就业机会和经济利润。
英文摘要
On average, hip-replacements have a life span of 15-20 years, after which revision surgery is necessary. A revision surgery is undesirable, problematic and less successful than a primary replacement. Problematic is the inadequate capacity of current implants to preserve the quality of the host bone, which thus cannot sufficiently secure the revision implant into position. The aim of this research program is to develop a novel material microstructure for a total hip arthroplasty implant which can last longer, maintain the quality of the host bone, and provide a stable implant fixation. The proposed material is a titanium alloy, Ti-6AL-4V, lattice; its groundbreaking hallmark lies in the controlled gradients of material properties which are designed to match the local properties of the bone and provide unprecedented elastic and strength properties as well as superior fatigue, damage and wear resistance. The new implant will enhance the treatment of patients requiring primary and revision hip replacement, lower the need of revision surgery and the related health care cost; in case of revision surgeries, it will increase its success rate.
While the long-term vision is to make the implant market ready, the specific short-term goals focus on the development of models and methods for lattice material design, followed by their experimental validation. The anticipated outcomes include 1) the development of multiscale models for the characterization of the elastoplastic, strength and fatigue properties of lattice cell topologies suitable for tissue bone scaffolding; 2) the multiobjective optimization of the femoral stem and acetabular cup made of graded lattice materials for minimum wear, bone resorption and implant-bone micromotion.
This research will train a pool of highly qualified researchers equipped with cutting-edge, interdisciplinary expertise in lattice materials, multiscale mechanics, biomechanics, biomedical engineering, design optimization and fatigue testing. Upon graduation these students will stimulate the growth and formation of Canadian companies in the orthopaedic sector, which will result in the creation of jobs and economic profits for Canada.
期刊论文(0)
专著(0)
科研奖励(0)
会议论文
Mechanical Metamaterials
-
批准号:CRC-2020-00080
-
项目类别:Canada Research Chairs
-
资助金额:$14.57万
-
财政年份:2022
-
负责人:Pasini, Damiano
-
依托单位:
Shape-transforming Mechanical Metamaterials
-
批准号:RGPIN-2017-04641
-
项目类别:Discovery Grants Program - Individual
-
资助金额:$9.62万
-
财政年份:2021
-
负责人:Pasini, Damiano
-
依托单位:
Reconfigurable Mechanical Metamaterials
-
批准号:CRC-2020-00080
-
项目类别:Canada Research Chairs
-
资助金额:$10.93万
-
财政年份:2021
-
负责人:Pasini, Damiano
-
依托单位:
Shape-transforming Mechanical Metamaterials
-
批准号:RGPIN-2017-04641
-
项目类别:Discovery Grants Program - Individual
-
资助金额:$4.81万
-
财政年份:2020
-
负责人:Pasini, Damiano
-
依托单位:
Shape-transforming Mechanical Metamaterials
-
批准号:RGPIN-2017-04641
-
项目类别:Discovery Grants Program - Individual
-
资助金额:$4.81万
-
财政年份:2019
-
负责人:Pasini, Damiano
-
依托单位:
Shape-transforming Mechanical Metamaterials
-
批准号:507986-2017
-
项目类别:Discovery Grants Program - Accelerator Supplements
-
资助金额:$2.91万
-
财政年份:2019
-
负责人:Pasini, Damiano
-
依托单位:
Shape-transforming Mechanical Metamaterials
-
批准号:507986-2017
-
项目类别:Discovery Grants Program - Accelerator Supplements
-
资助金额:$2.91万
-
财政年份:2018
-
负责人:Pasini, Damiano
-
依托单位:
Shape-transforming Mechanical Metamaterials
-
批准号:RGPIN-2017-04641
-
项目类别:Discovery Grants Program - Individual
-
资助金额:$4.81万
-
财政年份:2018
-
负责人:Pasini, Damiano
-
依托单位:
Shape-transforming Mechanical Metamaterials
-
批准号:RGPIN-2017-04641
-
项目类别:Discovery Grants Program - Individual
-
资助金额:$4.81万
-
财政年份:2017
-
负责人:Pasini, Damiano
-
依托单位:
Multi-objective Optimization of Patterned Void Structures
-
批准号:472149-2014
-
项目类别:Collaborative Research and Development Grants
-
资助金额:$4.25万
-
财政年份:2017
-
负责人:Pasini, Damiano
-
依托单位:
Shape-transforming Mechanical Metamaterials
-
批准号:507986-2017
-
项目类别:Discovery Grants Program - Accelerator Supplements
-
资助金额:$2.91万
-
财政年份:2017
-
负责人:Pasini, Damiano
-
依托单位:
Development of a mechanically biomcompatible hip replacement implant with Ti-6Al-4V open-cell microlattice architecture
-
批准号:462501-2014
-
项目类别:Collaborative Health Research Projects
-
资助金额:$5.78万
-
财政年份:2016
-
负责人:Pasini, Damiano
-
依托单位:
Lattice materials with graded mechanical properties for the development of a novel hip-replacement implant
-
批准号:312544-2012
-
项目类别:Discovery Grants Program - Individual
-
资助金额:$2.77万
-
财政年份:2016
-
负责人:Pasini, Damiano
-
依托单位:
Development of a mechanically biomcompatible hip replacement implant with Ti-6Al-4V open-cell microlattice architecture
-
批准号:462501-2014
-
项目类别:Collaborative Health Research Projects
-
资助金额:$5.78万
-
财政年份:2015
-
负责人:Pasini, Damiano
-
依托单位:
Multi-objective Optimization of Patterned Void Structures
-
批准号:472149-2014
-
项目类别:Collaborative Research and Development Grants
-
资助金额:$4.17万
-
财政年份:2015
-
负责人:Pasini, Damiano
-
依托单位:
Lattice materials with graded mechanical properties for the development of a novel hip-replacement implant
-
批准号:429565-2012
-
项目类别:Discovery Grants Program - Accelerator Supplements
-
资助金额:$2.91万
-
财政年份:2014
-
负责人:Pasini, Damiano
-
依托单位:
Development of a mechanically biomcompatible hip replacement implant with Ti-6Al-4V open-cell microlattice architecture
-
批准号:462501-2014
-
项目类别:Collaborative Health Research Projects
-
资助金额:$5.78万
-
财政年份:2014
-
负责人:Pasini, Damiano
-
依托单位:
Lattice materials with graded mechanical properties for the development of a novel hip-replacement implant
-
批准号:312544-2012
-
项目类别:Discovery Grants Program - Individual
-
资助金额:$2.77万
-
财政年份:2014
-
负责人:Pasini, Damiano
-
依托单位:
Lattice materials with graded mechanical properties for the development of a novel hip-replacement implant
-
批准号:312544-2012
-
项目类别:Discovery Grants Program - Individual
-
资助金额:$2.77万
-
财政年份:2013
-
负责人:Pasini, Damiano
-
依托单位:
Robust design and multi-objective optimization of patterned void structures
-
批准号:461766-2013
-
项目类别:Engage Grants Program
-
资助金额:$1.82万
-
财政年份:2013
-
负责人:Pasini, Damiano
-
依托单位:
国内基金
海外基金
登录
查看更多内容
CuAgSe基热电材料的结构特性与构效关系研究
-
批准号:22375214
-
项目类别:面上项目
-
资助金额:50.00万元
-
批准年份:2023
-
负责人:周钲洋
-
依托单位:
层状半导体材料纳米结构中激子分离动力学研究
-
批准号:22073022
-
项目类别:面上项目
-
资助金额:63.0万元
-
批准年份:2020
-
负责人:刘新风
-
依托单位:
Capture and Release of Droplets Using Advanced Materials for High Technology Applications
-
批准号:52073127
-
项目类别:面上项目
-
资助金额:58.0万元
-
批准年份:2020
-
负责人:Alidad Amirfazli
-
依托单位:
碳/碳复合材料膺复体仿生喉气管重建动物模型建立
-
批准号:51172002
-
项目类别:面上项目
-
资助金额:60.0万元
-
批准年份:2011
-
负责人:秦永
-
依托单位:
Journal of Materials Science & Technology
-
批准号:51024801
-
项目类别:专项基金项目
-
资助金额:24.0万元
-
批准年份:2010
-
负责人:罗东
-
依托单位:
天然生物材料的多尺度力学与仿生研究
-
批准号:10732050
-
项目类别:重点项目
-
资助金额:200.0万元
-
批准年份:2007
-
负责人:冯西桥
-
依托单位:
均匀纳米孔低介电材料的可控制备研究
-
批准号:90606011
-
项目类别:重大研究计划
-
资助金额:30.0万元
-
批准年份:2006
-
负责人:徐洪耀
-
依托单位:
一维和二维的可调谐特异性电介质材料
-
批准号:50477048
-
项目类别:面上项目
-
资助金额:26.0万元
-
批准年份:2004
-
负责人:张冶文
-
依托单位: