Electronic Design Automation Fabrication

9452121库克这项建议将加强费里斯州立大学电气/电子工程技术课程的四(4)门课程。这些课程(EEET 311、EEET 412、EEET 422、EEET 428)与EEET计划中的顶石项目课程一起形成了核心模拟和数字课程。建议通过更新电子设计自动化工具来加强这些课程，以允许设计、模拟和制造包含混合类型器件的电路。这些类型将包括模拟、微处理器和可编程逻辑器件。指定的硬件和软件将允许设计和模拟电路以观察操作。然后对印刷电路板或多芯片模块进行布局。将观察得到的电路板的热分布，并将生成电路板的最终图稿以及相应的设计文档。然后将组装电路板并执行最终测试。该提案需要购买十(10)台工作站计算机和相关的外围设备。Mentor Graphics设计自动化软件之所以被指定，是因为它的全套工具可以完成建议的任务。

9452121 Cook This proposal will enhance four (4) courses in the Electrical/Electronic Engineering Technology program at Ferris State University. The courses (EEET 311, EEET 412, EEET 422, EEET 428) form the core analog and digital courses along with the capstone project course in the EEET program. It is proposed to enhance these courses by updating the electronic design automation tools to allow circuits to be designed, simulated and fabricated which contain mixed types of devices. These types would include analog, microprocessor and programmable logic devices. The specified hardware and software will allow a circuit to be designed and simulated to observe operation. The printed circuit board or multi chip module will then be layed out. Thermal profiles of the resulting board will be observed and the final artwork for the board will be generated along with appropriate documentation for the design. The board will then be assembled and final testing will be performed. The proposal requires purchase of ten (1O) workstation computers and associated peripherals. Mentor Graphics design automation software is specified because of its complete suite of tools which can accomplish the proposed tasks.