NANOMANIPULATOR NEW SITES

nanoManipulator软件安装在Wright-Patterson Air 部队基地供露丝·帕切特的SPM小组使用。 该系统被移植到 在他们的Per-force手动控制器上运行。 他们还与 WPAFB的主要共享资源中心，以获得PHANToM显示 设备. 该系统用于可视化 光学活性材料。 该系统还安装在 比利时鲁汶天主教大学化学系。 Frans De Schryver的团队购买了SGI Octane图形引擎， 一个PHANToM的力量设备，让他们运行系统与他们的 现有的拓扑结构AFM。 他们使用这个系统来可视化 存储的数据集，并执行实时纳米操纵 表面。 nanoManipulator已安装在NAMT实验室， NIST。 他们正在使用该系统来控制他们的Topomeastern SPM。 我们 正在与他们合作开发算法， vBNS网络上的实验。

The nanoManipulator software was installed at Wright-Patterson Air Force Base for use by Ruth Pachter's SPM group. The system was ported to run on their Per-force hand controller. They also worked with the Major Shared Resource Center at WPAFB to obtain a PHANToM display device. The system is being used for visualization of optically-active materials. The system has also been installed in the Chemistry department at the Catholic University of Leuven, Belgium. Frans De Schryver's group purchased an SGI Octane graphics engine and a PHANToM force device to allow them to run the system with their existing Topometrix AFM. They are using the system both to visualize stored data sets and to perform real-time nanomanipulation on surfaces. The nanoManipulator has been installed at the NAMT lab in NIST. They are using the system to control their Topometrix SPM. We are working with them to develop algorithms to allow long-distance experiments over the vBNS network.