Continuation of a IUCRC Co-Center for Surface Engineering and Tribology

延续 IUCCRC 表面工程和摩擦学联合中心

• 批准号: 9909822
• 负责人: Steven Danyluk
• 金额: --
• 依托单位: Georgia Tech Research Corporation
• 依托单位国家: 美国
• 项目类别: Continuing Grant
• 财政年份: 1999
• 资助国家: 美国
• 起止时间: 1999-09-15 至 2008-08-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=9909822&HistoricalAwards=false
• 关键词: Continuation; IUCRC; Co; Center; Surface

This continuing grant funds the second five years (in accordance with Announcement NSF 97-164) of the multi-university Industry/University Cooperative Research Center (I/UCRC) for Surface Engineering and Tribology. Northwestern has the lead with Georgia Institute of Technology as a partner research site.The I/UCRC's research agenda addresses 1.) Fatigue Life Calculations for Hard Coated and Uncoated Rollers, 2.) Enhanced Tribological Properties of Ti N-Based PVD Coatings, 3.) 3D Surface Crack Growth Modeling for Rolling Contact Fatigue, 4.) Lubricant Chemistry in Concentrated 5.) Lubrication of Drawing and Surface Generation in Strip Rolling, 7.) Tribology and Fixturing of Machined Parts, 8) Slurry Film Thickness Measurements in the Chemo-Mechanical Polishing of Silicon, 9.) Mathematical Model of Lip Seal, 10.) Lubricant Rheology and 11.) Wear and Lubrication of a Thrust Washer System.

这项持续拨款资助了多大学工业/大学合作研究中心（I/UCRC）表面工程和摩擦学的第二个五年（根据NSF 97-164号公告）。 西北大学与格鲁吉亚理工学院合作，成为该校的研究中心。硬涂层和无涂层辊的疲劳寿命计算，2.）Ti N基PVD涂层的增强摩擦学性能，3.）滚动接触疲劳的3D表面裂纹扩展建模，4.）润滑油化学浓缩5.）带钢轧制中拉伸和表面生成的润滑，7。）机械加工零件的摩擦学和固定，8）硅化学机械抛光中的浆料膜厚度测量，9）唇形密封的数学模型，10。）润滑剂流变学和11.）推力垫圈系统的磨损和润滑。