A Compact and Durable Catheter Pump
紧凑耐用的导管泵
基本信息
- 批准号:6337239
- 负责人:
- 金额:$ 19.66万
- 依托单位:
- 依托单位国家:美国
- 项目类别:
- 财政年份:2001
- 资助国家:美国
- 起止时间:2001-04-15 至 2002-07-14
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
DESCRIPTION (Verbatim from the Applicant's Abstract): A small, intravascular
catheter pump providing adequate output, good blood compatibility, and high
reliability is being designed for use as a cardiac-assist pump in the operating
room or interventional cardiology laboratory. This pump would function not only
for minimally invasive surgery, but also as a valuable, intermediate level of
support between balloon pumps and the much more invasive cardiopulmonary bypass
or ventricle-assist devices. Compared to existing catheter pumps, the proposed
design is unique in its use of magnetic bearings, and, thus, avoids mechanical
bearings or seals that could cause thrombosis. Further, since blood flows
through the motor gap, as well as over the outside diameter, the motor is
well-cooled, allowing for the compactness of the design and the mechanical
durability (i.e., high reliability) of the pump over extended periods. The
Phase I pump is 7 mm in diameter, and designed to produce 3 I/min at 90 mm Hg
when running at approximately 30,000 rpm. During Phase I, test data will be
used to optimize the design at or below 6-mm outside diameter to enhance the
pump's potential for peripheral, as well as central, insertion in the aorta.
During Phase II, a production prototype will be designed, bench-tested, and
in-vivo tested.
PROPOSED COMMERCIAL APPLICATION:
The market for the proposed catheter pump evolves from the cardiac, minimally invasive
surgery field, which is estimated to include over 30,000 cases in 2000, and is still be
growing rapidly. The pump will also be a more hemodynamically potent cardiac-assist
device than balloon pump, which are predicted to have sales of nearly 90,000 units in
2000.
描述(摘自申请人摘要):一个小的,血管内的
项目成果
期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
数据更新时间:{{ journalArticles.updateTime }}
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
HSIANG M CHEN其他文献
HSIANG M CHEN的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('HSIANG M CHEN', 18)}}的其他基金
Low-Cost Rotary Blood Pump with ICB Magnetic Support
带 ICB 磁力支撑的低成本旋转式血泵
- 批准号:
6689892 - 财政年份:2003
- 资助金额:
$ 19.66万 - 项目类别:
A HIGH EFFICIENCY MAGNETIC BEARING ROTARY BLOOD PUMP
高效磁力轴承旋转式血液泵
- 批准号:
6140526 - 财政年份:2000
- 资助金额:
$ 19.66万 - 项目类别:
INHERENTLY CONTROLLED MAGNETIC BEARING ROTARY BLOOD PUMP
固有控制磁力轴承旋转血泵
- 批准号:
6211193 - 财政年份:2000
- 资助金额:
$ 19.66万 - 项目类别:
Inherently Controlled Magnetic Bearing Rotary Blood Pump
固有控制磁力轴承旋转血泵
- 批准号:
6484520 - 财政年份:2000
- 资助金额:
$ 19.66万 - 项目类别:
Inherently Controlled Magnetic Bearing Rotary Blood Pump
固有控制磁力轴承旋转血泵
- 批准号:
6603406 - 财政年份:2000
- 资助金额:
$ 19.66万 - 项目类别:
Inherently Controlled Magnetic Bearing Rotary Blood Pump
固有控制磁力轴承旋转血泵
- 批准号:
6771117 - 财政年份:2000
- 资助金额:
$ 19.66万 - 项目类别:














{{item.name}}会员




