Non-Contact Roundness Measurement

非接触式圆度测量

• 批准号: 445284-2012
• 负责人: Rashidzadeh, Rashid
• 金额: $ 1.82万
• 依托单位: University of Windsor
• 依托单位国家: 加拿大
• 项目类别: Engage Grants Program
• 财政年份: 2012
• 资助国家: 加拿大
• 起止时间: 2012-01-01 至 2013-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=511137
• 关键词: Non; Contact; Roundness; Measurement

The aim of this project is to develop a non-contact method to measure transmission components using a software interface to collect data and report the results. At the end of this project, we will have a high speed device that is capable of measuring a family of components and reporting the results in a concise and user friendly environment. The goal is to measure a component in less than two minutes. This provides users with a real time result to make adjustments to the manufacturing process and also to provide end users with traceable certifications. At present, this operation is done using a touch probe Coordinate Measuring Machine (CMM) which takes 10-20 minutes per part to get the results depending on the degree of details required.

该项目的目的是开发一种非接触式方法来测量传输组件，使用软件接口收集数据并报告结果。在该项目结束时，我们将拥有一个高速设备，能够测量一系列组件并在简洁且用户友好的环境中报告结果。目标是在两分钟内测量一个组件。这为用户提供了实时结果，以便对制造过程进行调整，并为最终用户提供可追溯的认证。目前，此操作是使用接触式探针坐标测量机 (CMM) 完成的，每个零件需要 10-20 分钟才能获得结果，具体取决于所需的细节程度。