Software architecture, model driven development and fault tolerance

软件架构、模型驱动开发和容错

• 批准号: 26775-2011
• 负责人: Maibaum, Thomas
• 金额: $ 3.06万
• 依托单位: McMaster University
• 依托单位国家: 加拿大
• 项目类别: Discovery Grants Program - Individual
• 财政年份: 2016
• 资助国家: 加拿大
• 起止时间: 2016-01-01 至 2017-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=592997
• 关键词: Software; architecture; model; driven; development

Many practical and foundational problems in software engineering are essentially about representing the structure of software artifacts. Today's software intensive systems are very large and complex. They must be designed and implemented in parts that are manageable by engineers. This requires schemes for putting together parts to represent the whole. Analysis methods must be able to navigate between parts and whole to take advantage of complexity reduction in focusing on parts and then being able to "promote" the results to be applied to the whole. Structure may be imposed in at least two ways: the first is the usual hierarchical structuring typified by the part/whole relationship, a kind of vertical structuring, and the second may be seen as having various views of a whole, each representing different, but possibly overlapping, information about the whole, a kind of horizontal structuring.

软件工程中的许多实际和基础问题本质上都是关于表示软件构件的结构。当今的软件密集型系统非常庞大和复杂。它们必须以工程师可管理的部分进行设计和实现。这就需要将各个部分组合在一起以代表整体的方案。分析方法必须能够在部分和整体之间导航，以利用关注部分的复杂性降低，然后能够“促进”结果应用于整体。结构可以至少以两种方式施加：第一种是通常的层次结构，以部分/整体关系为代表，一种垂直结构，第二种可以被视为具有整体的各种视图，每个视图代表不同的，但可能重叠的关于整体的信息，一种水平结构。